Research of a temperature condition of an entrance edge of a shovel at various configurations of edges-turbulizatorov
DOI:
https://doi.org/10.15587/1729-4061.2010.2795Keywords:
cooling blade, leading edge, thermal.Abstract
This paper presents CFD heat transfer investigations in the leading edge cooling channel of the blade with different rib turbulator configurations. Analysis of heat transfer factor distribution along the cross section perimeter of the channel was carried out. The effect of rib configurations on the blade leading edge thermal state was also obtained.References
- Хан, Парк, Лей Интенсификация теплообмена в канале с турбулизаторами // Энергетические машины. – 1985. – Т. 107, №3. – С.38-45.
- Taslim M.E., Li T., Kercher D.M. Experimental heat transfer and friction in channels roughened with angled, V-shaped and discrete ribs on two opposite walls // – 1994, ASME Paper 94-GT-163.
- Lee D.H., Rhee D.H., Cho H.H. Heat transfer measurements in a rotating equilateral triangular channel with various rib arrangements // ASME Turbo Expo 2006. ASME Paper GT2006-90973.
- Liu Y.H., Huh M., Han J.C., Moon H.K. High rotation number effect on heat transfer in triangular channel with 45°, invert 45° and 90° ribs // ASME Turbo Expo 2009. ASME Paper GT2009-59216.
- Письменный Д.Н. CFD-расчет теплоотдачи и потерь давления в канале с ребрами-турбулизаторами // Вісник двигунобудування. – 2009. – №3 (22).– С.82–87.
- Turbulence and near-wall modelling // ANSYS CFX-Solver Theory Guide. ANSYS CFX Release 11.0.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Д.Н. Письменный, Ю.Я. Дашевский, А.А. Халатов
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.