Robust control methods of thermomechanical processes in the machining of parts
DOI:
https://doi.org/10.15587/1729-4061.2014.28074Keywords:
adaptive control, robust system, thermal processes, machining, surface layer qualityAbstract
In designing the machine parts manufacturing process, there is a need to develop a quality control system of the working surfaces of products as a result of various phenomena, which accompany machining and significantly affect their performance. For that, robust methods that are based on the object identification under uncertainty, adaptive control methods, stabilization methods of families of automatic control system, mathematical modeling of the system can be used.
The paper presents mathematical support for modeling thermomechanical processes, stresses and automatic stabilization system of thermophysical phenomena in machining taking into account robust control methods. Using the method of successive approximations, the initial nonlinear heat conduction problem is reduced to an iterative process, where, on each step, the task, described by parabolic linear equation with nonlinear phase constraints is solved.
The robust system synthesis provides the guarantees of the required quality, regardless of errors and changes in the model parameters. Robust control system has the necessary quality, despite the substantial uncertainty of control object characteristics.
The presence of functional connections between the technological system parameters and thermal processes in machining allows to design a control system of quality characteristics of machined surfaces of machine parts using robust methods, based on the object identification under uncertainty, adaptive control methods, stabilization methods of families of automatic control system.
References
1. Jkimov, A. V., Slobodynik, P. T., Usov, A. V. (1991). The physics of machining. К, Odessa, Libid, 240 .
2. Mazur, N. P., Gayr, A. S., Ben, Y. (2014). Modelling of thermal phenomena cutting tool coated by the method of finite element. Modern technologies in Mashinostroenie. scient. Tr. NTU "KHPI", 9, 183–190.
3. Bhattacharyy, S. P. (1990). Robust control: the parametric approach. Recent Advances in Robust Control. N.Y.;IEEE Press, 17–22.
4. Dorf, R. (2004). Available.modern management system. Prov. Мoscow: Laboratoriy Basovich Snanij, 832.
5. Petrakov, Y. V. (1998). The theory of automatic control in Metalworking. Кiev ISMN, 218.
6. Usov, A. V., Oborskiy, G. A., Morosov, Y. A. (2005). Introduction to optimization methods and theory of technical system. Odessa, Astroprint, 496.
7 Usov, A. V., Dubrov, A. N., Dmitrischin, D. V. (2002). Modeling of systems with distributed parameters the.Odessa, Astroprint, 664.
8. Popov, G. J. (1982).The elastic stress concentration near stamps, cuts, thin inclusions and reinforcements. Мoscow: Nauka, 344.
9. Usov, A. V. (1991). Improving the efficiency of the process defect-free grinding of materials and alloys that are prone to crack formation. Кiev, 324.
10. Smirnov, E. Y. (1988). Motion control of mechanical systems. Lviv, 81.
11. Matalin, A. A. (1985). Precision machining and designing of technological processes. Lviv: Engineering, 320.
12. Krasovskii, А. А. (Ed.) (1987). Handbook on the theory of automatic control. Мoskow: Nauka, 712.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Анатолий Васильевич Усов, Елена Наиловна Богданова
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
