Research of heat emission in the pulsation heat pipe
DOI:
https://doi.org/10.15587/1729-4061.2010.2900Keywords:
pulsating heat pipe, heat transfer coefficient, heating zone, cooling zoneAbstract
Given article considers principle of pulsating heat pipe operation. Average heat transfer coefficients for heating and cooling zones are calculated according to parameters of cooling and input heat flux. Heat transfer unevenness is established in different turns of PHP.References
- Pat. 5219020 US. Structure of micro-heat pipe / Akachi H. – 1993.
- Lanchao Lin. Experimental investigation of oscillating heat pipes for actuator cooling // Thermal management research studies. – Final report for period 20 August 1996 – 31 December 2000. – Volume 2. – March 2001. – 32 p.
- Наумова А.Н., Кравец В.Ю. Технологические аспекты изготовления плоской пульсационной тепловой трубы // Збірник наукових праць СНУЯЕтаП. – 2009. - №1 (29). – с. 120-127.
- Yang H., Khandekar S. and Groll M. Operational limit of closed loop pulsating heat pipеs// Applied Thermal Engineering. –2008. – Vol. 28, Issue 1. – Р. 49-59.
- Cao X. A novel design of pulsating heat pipes with improved performance // 13th Int. Heat Pipe Conf., pp. 302-307, China, 2004.
- Кравец В. Ю., Наумова А. Н., Вовкогон А.Н. Исследование режимов теплообмена в пульсационной тепловой трубе // Технология и конструирование в электронной аппаратуре. – 2010. – № 1(85). – С. 39-43.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Алена Николаевна Наумова, Владимир Юрьевич Кравец
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.