Design of an information-computer system for the automated modeling of systems for automatic orientation of production objects in the machine and instrument industries

Authors

DOI:

https://doi.org/10.15587/1729-4061.2024.306516

Keywords:

information-computer system, automatic orientation, technological preparation of production, decision support

Abstract

An information-computer system has been developed for the automated modeling of systems for automatic orientation of production objects, which is one of the most important and complex creative flexible production systems of machine and instrument engineering. The proposed information-computer system for automated modeling of systems of automatic orientation of production objects is an effective tool for solving an important task of a scientific and applied nature. Its use makes it possible to increase the speed and efficiency of information processing and to make correct and well-founded decisions when determining the composition and method of organization of systems of automatic orientation of production objects. The structure of this information-computer system is a specific set of software and hardware and information and telecommunication tools and interactive functional modules. This structure reproduces a certain paradigm that conditions the integrity and integration of the information-computer system for automated modeling of systems for automatic orientation of production objects in flexible production systems. In addition, uniformity, extensibility, the possibility of modernization and changeability of software components, protection of information from unauthorized access and preservation of commercial secrets are ensured according to international criteria for evaluating the protection of the computer system. Neuro-fuzzy network information processing and computer vision algorithms have been implemented for automatic identification of production objects and orientation devices, which are components of automatic orientation systems of production objects. The developed information-computer system processes information in real time with high accuracy and speed

Author Biographies

Irina Cherepanska, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»

Doctor of Technical Sciences, Professor

Department of Automation and Non-Destructive Testing Systems

Artem Sazonov, National Technical University of Ukraine «Igor Sikorsky Kyiv Polytechnic Institute»

PhD, Associate Professor

Department of Technical and Software Automation Tools

Petro Melnychuk, Zhytomyr Polytechnic State University

Doctor of Technical Sciences, Professor

Department of Mechanical Engineering

Dmytro Melnychuk, Zhytomyr Polytechnic State University

Doctor of Economic Sciences, Professor

Department of Psychology and Social Welfare

Sergii Kalchuk, Zhytomyr Polytechnic State University

PhD, Associate Professor

Department of Surveying

Volodymyr Pryadko, Polissia National University

Department of Electrification, Production Automation and Engineering Ecology

Valery Yanovsky, Zhytomyr Polytechnic State University

PhD, Associate Professor

Department of Mechanical Engineering

References

  1. Cherepanska, I., Sazonov, A., Melnychuk, D., Melnychuk, P., Khazanovych, Y. (2023). Quaternion Model of Workpieces Orienting Movements in Manufacturing Engineering and Tool Production. Lecture Notes in Mechanical Engineering, 127–135. https://doi.org/10.1007/978-3-031-42778-7_12
  2. Al-Ahmari, A. M., Abdulhameed, O., Khan, A. A. (2018). An automatic and optimal selection of parts orientation in additive manufacturing. Rapid Prototyping Journal, 24 (4), 698–708. https://doi.org/10.1108/rpj-12-2016-0208
  3. Qin, Y., Qi, Q., Shi, P., Scott, P. J., Jiang, X. (2021). Status, issues, and future of computer-aided part orientation for additive manufacturing. The International Journal of Advanced Manufacturing Technology, 115 (5-6), 1295–1328. https://doi.org/10.1007/s00170-021-06996-6
  4. Paramasivam, V., Senthil, V., Rajam Ramasamy, N. (2010). Decision making in equipment selection: an integrated approach with digraph and matrix approach, AHP and ANP. The International Journal of Advanced Manufacturing Technology, 54 (9-12), 1233–1244. https://doi.org/10.1007/s00170-010-2997-4
  5. Abdelrhman, A. M., Wei Gan, W., Kurniawan, D. (2019). Effect of part orientation on dimensional accuracy, part strength, and surface quality of three dimensional printed part. IOP Conference Series: Materials Science and Engineering, 694 (1), 012048. https://doi.org/10.1088/1757-899x/694/1/012048
  6. Danshina, S. Yu. (2014). Funktsional'noe modelirovanie protsessa tehnologicheskoy podgotovki proizvodstva dlya proektov sozdaniya novoy tehniki. Otkrytye informatsionnye i komp'yuternye integrirovannye tehnologii, 66, 37–46. Available at: http://dspace.library.khai.edu/xmlui/handle/123456789/5089
  7. Pishchukhin, A. M., Akhmedyanova, G. F. (2019). Hierarchical selection of technological equipment for the production system. IOP Conference Series: Earth and Environmental Science, 378 (1), 012024. https://doi.org/10.1088/1755-1315/378/1/012024
  8. Vagapov, T. R., Murav’ev, V. V. (2023). Integration of Technological Preparation of Production into Automated Design Systems. Vestnik IzhGTU Imeni M.T. Kalashnikova, 26 (4), 50–58. https://doi.org/10.22213/2413-1172-2023-4-50-58
  9. Soufi, Z., David, P., Yahouni, Z. (2021). A methodology for the selection of Material Handling Equipment in manufacturing systems. IFAC-PapersOnLine, 54 (1), 122–127. https://doi.org/10.1016/j.ifacol.2021.08.193
  10. Angius, A., Colledani, M., Manzini, M., Ratti, A., Urgo, M. (2016). Equipment selection and evaluation approach for an adaptable assembly line. IFAC-PapersOnLine, 49 (12), 47–52. https://doi.org/10.1016/j.ifacol.2016.07.548
  11. Sokolnikov, R. A., Bozheeva, T. V., Govorkov, A. S. (2020). Development of methodology for formalized selection of technological operations when designing technological process manufacturing of machinery. Journal of Physics: Conference Series, 1582 (1), 012080. https://doi.org/10.1088/1742-6596/1582/1/012080
  12. Xu, C. (2018). Application Analysis on Modern Machinery Manufacturing Technology and Precision Machining Technology. Proceedings of the 4th Workshop on Advanced Research and Technology in Industry (WARTIA 2018). https://doi.org/10.2991/wartia-18.2018.26
  13. Pierobom, F. M., Andrade, J. J. de O. (2020). Application of product development tools in equipment design for a technology-based small business. Gestão & Produção, 27 (2). https://doi.org/10.1590/0104-530x3849-20
  14. Qin, Y., Qi, Q., Shi, P., Scott, P. J., Jiang, X. (2020). Automatic determination of part build orientation for laser powder bed fusion. Virtual and Physical Prototyping, 16 (1), 29–49. https://doi.org/10.1080/17452759.2020.1832793
  15. Kyrylovych, V., Tanovic, D., Kryzanivska, I., Melnychuk, P., Mohelnytska, L. (2022). Associative approach to automated synthesis of movement trajectories of industrial robots clamping devices using the method of crystallization of alternatives field. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44 (4). https://doi.org/10.1007/s40430-022-03434-w
  16. Cherepanska, I. Yu., Bezvesilna, O. M., Sazonov, A. Yu. (2018). Shtuchni neironni merezhi dlia vyrishennia zadach tekhnolohichnoi pidhotovky hnuchkoho vyrobnytstva. Kyiv: DP “NVTs “Prioritety”, 192.
  17. Calignano, F., Giuffrida, F., Galati, M. (2021). Effect of the build orientation on the mechanical performance of polymeric parts produced by multi jet fusion and selective laser sintering. Journal of Manufacturing Processes, 65, 271–282. https://doi.org/10.1016/j.jmapro.2021.03.018
  18. Nykolyuk, O. M., Martynchuk, I. V. (2018) A Methodology for Assessing Resource Potential of Innovation-Oriented Agricultural Enterprises, Problemy Ekonomiky, 1, 207–213. Available at: http://surl.li/skwic
  19. The Common Criteria. Available at: https://www.commoncriteriaportal.org
  20. Cherepanska, I., Bezvesilna, O., Sazonov, A., Nechai, S., Pidtychenko, O. (2018). Development of artificial neural network for determining the components of errors when measuring angles using a goniometric software-hardware complex. Eastern-European Journal of Enterprise Technologies, 5 (9 (95)), 43–51. https://doi.org/10.15587/1729-4061.2018.141290
Design of an information-computer system for the automated modeling of systems for automatic orientation of production objects in the machine and instrument industries

Downloads

Published

2024-06-28

How to Cite

Cherepanska, I., Sazonov, A., Melnychuk, P., Melnychuk, D., Kalchuk, S., Pryadko, V., & Yanovsky, V. (2024). Design of an information-computer system for the automated modeling of systems for automatic orientation of production objects in the machine and instrument industries. Eastern-European Journal of Enterprise Technologies, 3(2 (129), 6–19. https://doi.org/10.15587/1729-4061.2024.306516

Issue

Vol. 3 No. 2 (129) (2024): Information technology. Industry control systems

Section

Information technology

License

Copyright (c) 2024 Irina Cherepanska, Artem Sazonov, Petro Melnychuk, Dmytro Melnychuk, Sergii Kalchuk, Volodymyr Pryadko, Valery Yanovsky

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.