Development of mathematical models of heat conductivity for modern electronic devices with elements containing foreign inclusions

Authors

DOI:

https://doi.org/10.15587/1729-4061.2024.313747

Keywords:

thermal resistance of the structure, foreign half-through inclusion, ideal thermal contact, convective heat exchange

Abstract

This paper considers the heat conduction process for an isotropic medium containing a foreign half-through inclusion and heated by a locally concentrated heat flow. Linear and non-linear mathematical models for determining the temperature field have been built to establish the temperature regimes for the effective operation of electronic devices. The coefficient of thermal conductivity of a non-uniform structure is represented as a whole, using asymmetric unit functions, which automatically provides the conditions of ideal thermal contact on the surfaces of materials. This results in solving one heat conduction equation with discontinuous and singular coefficients. A linearizing function was introduced to linearize the nonlinear boundary value problem. Analytical-numerical solutions of linear and nonlinear boundary-value problems have been obtained in a closed form. A linear temperature dependence of the coefficient of thermal conductivity of structural materials was chosen for a heat-sensitive medium. As a result, an analytical-numerical solution was derived, which determines the temperature distribution in this medium. On this basis, a numerical experiment was performed, the results of which are graphically displayed and confirm the adequacy of the constructed mathematical models to a real physical process.

The materials of the plate and inclusion are silicon and silver. The results for these materials based on the linear and non-linear model differ by 7 %. Their slight difference is explained by the fact that the values of the temperature coefficient of thermal conductivity are small. The models built make it possible to analyze the given environments in terms of their thermal resistance. As a result, it becomes possible to improve it, and protect structures from overheating, which could lead to the failure of individual nodes and their elements and the entire electronic device

Author Biographies

Vasyl Havrysh, Lviv Polytechnic National University

Doctor of Technical Sciences, Professor

Department of Software

Elvira Dzhumelia, Lviv Polytechnic National University

PhD

Department of Software

Oksana Hrytsai, Lviv Polytechnic National University

PhD

Department of Software

Stepan Kachan, Lviv Polytechnic National University

PhD, Associate Professor

Department of Civil Safety

Viktoria Maikher, Lviv Polytechnic National University

PhD

Department of Software

References

  1. Sheikh, Z. (1994). Where do you the cooling vents. Electronics cooling.
  2. Zhang, Z., Sun, Y., Cao, X., Xu, J., Yao, L. (2024). A slice model for thermoelastic analysis of porous functionally graded material sandwich beams with temperature-dependent material properties. Thin-Walled Structures, 198, 111700. https://doi.org/10.1016/j.tws.2024.111700
  3. Zhang, Z., Zhou, D., Fang, H., Zhang, J., Li, X. (2021). Analysis of layered rectangular plates under thermo-mechanical loads considering temperature-dependent material properties. Applied Mathematical Modelling, 92, 244–260. https://doi.org/10.1016/j.apm.2020.10.036
  4. Peng, X., Li, X., Gong, Z., Zhao, X., Yao, W. (2022). A deep learning method based on partition modeling for reconstructing temperature field. International Journal of Thermal Sciences, 182, 107802. https://doi.org/10.1016/j.ijthermalsci.2022.107802
  5. Ren, Y., Huo, R., Zhou, D., Zhang, Z. (2022). Thermo-Mechanical Buckling Analysis of Restrained Columns Under Longitudinal Steady-State Heat Conduction. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 47 (3), 1411–1423. https://doi.org/10.1007/s40996-022-01020-7
  6. Breukelman, H. J., Santofimia, M. J., Hidalgo, J. (2023). Dataset of a thermal model for the prediction of temperature fields during the creation of austenite/martensite mesostructured materials by localized laser treatments in a Fe-Ni-C alloy. Data in Brief, 48, 109110. https://doi.org/10.1016/j.dib.2023.109110
  7. Zhang, W., Wu, M., Du, S., Chen, L., Hu, J., Lai, X. (2023). Modeling of Steel Plate Temperature Field for Plate Shape Control in Roller Quenching Process. IFAC-PapersOnLine, 56 (2), 6894–6899. https://doi.org/10.1016/j.ifacol.2023.10.493
  8. Khan, Z. H., Khan, W. A., Ibrahim, S. M., Mabood, F., Huang, Z. (2024). Effects of thermal boundary conditions on Stokes’ second problem. Results in Physics, 60, 107662. https://doi.org/10.1016/j.rinp.2024.107662
  9. Evstatieva, N., Evstatiev, B. (2023). Modelling the Temperature Field of Electronic Devices with the Use of Infrared Thermography. 2023 13th International Symposium on Advanced Topics in Electrical Engineering (ATEE), 1–5. https://doi.org/10.1109/atee58038.2023.10108375
  10. Liu, H., Yu, J., Wang, R. (2023). Dynamic compact thermal models for skin temperature prediction of portable electronic devices based on convolution and fitting methods. International Journal of Heat and Mass Transfer, 210, 124170. https://doi.org/10.1016/j.ijheatmasstransfer.2023.124170
  11. Ghannad, M., Yaghoobi, M. P. (2015). A thermoelasticity solution for thick cylinders subjected to thermo-mechanical loads under various boundary conditions. International Journal of Advanced Design & Manufacturing Technology, 8 (4).
  12. Song, H., Song, K., Gao, C. (2019). Temperature and thermal stress around an elliptic functional defect in a thermoelectric material. Mechanics of Materials, 130, 58–64. https://doi.org/10.1016/j.mechmat.2019.01.008
  13. Parhizkar Yaghoobi, M., Ghannad, M. (2020). An analytical solution for heat conduction of FGM cylinders with varying thickness subjected to non-uniform heat flux using a first-order temperature theory and perturbation technique. International Communications in Heat and Mass Transfer, 116, 104684. https://doi.org/10.1016/j.icheatmasstransfer.2020.104684
  14. Eker, M., Yarımpabuç, D., Çelebi, K. (2020). Thermal stress analysis of functionally graded solid and hollow thick-walled structures with heat generation. Engineering Computations, 38 (1), 371–391. https://doi.org/10.1108/ec-02-2020-0120
  15. Wang, H., Qin, Q. (2019). Thermal Analysis of a Functionally Graded Coating/Substrate System Using the Approximated Transfer Approach. Coatings, 9 (1), 51. https://doi.org/10.3390/coatings9010051
  16. Zhang, Q., Song, H., Gao, C. (2023). The 3-D problem of temperature and thermal flux distribution around defects with temperature-dependent material properties. Thermal Science, 27 (5 Part B), 3903–3920. https://doi.org/10.2298/tsci221003028z
  17. Havrysh, V. I., Kolyasa, L. I., Ukhanska, O. M., Loik, V. B. (2019). Determination of temperature field in thermally sensitive layered medium with inclusions. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 1, 76–82. https://doi.org/10.29202/nvngu/2019-1/5
  18. Havrysh, V. І. (2017). Investigation of Temperature Fields in a Heat-Sensitive Layer with Through Inclusion. Materials Science, 52 (4), 514–521. https://doi.org/10.1007/s11003-017-9984-y
  19. Havrysh, V. I., Kosach, A. I. (2012). Boundary-value problem of heat conduction for a piecewise homogeneous layer with foreign inclusion. Materials Science, 47 (6), 773–782. https://doi.org/10.1007/s11003-012-9455-4
  20. Gavrysh, V., Tushnytskyy, R., Pelekh, Y., Pukach, P., Baranetskyi, Y. (2017). Mathematical model of thermal conductivity for piecewise homogeneous elements of electronic systems. 2017 14th International Conference The Experience of Designing and Application of CAD Systems in Microelectronics (CADSM), 50, 333–336. https://doi.org/10.1109/cadsm.2017.7916146
Development of mathematical models of heat conductivity for modern electronic devices with elements containing foreign inclusions

Downloads

Published

2024-10-31

How to Cite

Havrysh, V., Dzhumelia, E., Hrytsai, O., Kachan, S., & Maikher, V. (2024). Development of mathematical models of heat conductivity for modern electronic devices with elements containing foreign inclusions. Eastern-European Journal of Enterprise Technologies, 5(5 (131), 70–79. https://doi.org/10.15587/1729-4061.2024.313747

Issue

Vol. 5 No. 5 (131) (2024): Applied physics

Section

Applied physics

License

Copyright (c) 2024 Vasyl Havrysh, Elvira Dzhumelia, Oksana Hrytsai, Stepan Kachan, Viktoria Maikhe

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.