About existing of combinatorial mode in axial pump flow parts with HP blade systems
DOI:
https://doi.org/10.15587/1729-4061.2010.3357Keywords:
axial flow pump, impeller, guide vanes, velocity momentum of the flowAbstract
The question of the creation of the atlas model axial flow parts of new pumps at the base of the new blade system. The methods of conducting mining flow paths. Concluded that there exists a combinatorial mode of blade systems.References
- В. Чубур. Рецепт от ВНИИАЭН и Насосэнергомаша // Общественно-деловой еженедельник «Ваш шанс»/№37/ 16-33 сентября 2009
- DESIGN OF THE ESSENTIALLY NEW TYPE OF AXIAL PUMPS. Oleksand Husak, Anatoliy Yevtushenko, Vitaliy Panchenko, Natalya Fedotova // MOTROL (volume 11 a) – Lublin: Komisja Motorizacji i Energetyki Rolnictwa, 2009 – p. 11-19
- Гусaк A.Г. Совершенствовaние проточных чaстей погружных моноблочных нaсосных aгрегaтов высокой быстроходности. 1996: дис. кaндидaтa тех. нaук: 05.05.17/Гусaк A.Г. – Сумы, – 213 с.
- Гусaк A.Г., Евтушенко A.A. О целесообрaзности и принципaх создaния типорaзмерного рядa погружных моноблочных нaсосов со схемой проточной чaсти “нaпрaвляющий aппaрaт – рaбочее колесо”. 1994. Гидрaвлические мaшины и гидропневмоaгрегaты. Теория, рaсчет, конструировaние: Темaт. сб. нaуч. тр. [ отв. ред. И. A. Ковaлев ] – К.: ИСИО, С. 141–149
- Михaйлов A.Н. Мaлюшенко В.В. Конструкции и рaсчет центробежных нaсосов высокого дaвления. 1971. – М.: Мaшиностроение, - 304 с.
- Пaпир A.Н. Осевые нaсосы водометных движителей. 1965.- Л.: Судостроение, - 252 с.
- Фєдотова Н.А. Взаємоз’язок форми меридіанної проекції робочого колеса лопатевого насоса і момента швидкості потоку перед ним. Автореф дис. канд. техн. наук. 05.05.17/ Фєдотова Н.А. – Сумы, 2009 – 20 с.
- Гидравлические турбины. Барлит В.В. – Киев: «Вища школа», 1977 – 360 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Віталій Олександрович Панченко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
