Flexible tile on the basis of powder rubber

Authors

  • Валентина Серафимовна Демьянова Penza State University of Architecture and Construction str. Titov, 28, Penza, 440028, Ukraine
  • Алексей Дмитриевич Гусев Penza State University of Architecture and Construction str. Titov, 28, Penza, 440028, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4633

Keywords:

worn-out tires, processing products, rubber powder, flexible tile, strength.

Abstract

The principal technological and methodological bases of flexible tile production applying powder rubber of mechanical recycling of worn-out tires are set out in the work. The impact of the powder diameter on strength at rubber tile rupture was studied. The optimal prescribed and technological parameters of roofing material were determined. The choice of binding agent was made, the optimal grade analysis of rubber powder was selected. The techno-economic and ecological aspects of resource-saving roofing tile production were justified. At present, on the basis of the small-scale innovative enterprise Ltd “Scientific production association “Ecoresource” the production of floor and roofing construction materials applying powder rubber – the processing product of worn-out tires, was arranged.

Author Biographies

Валентина Серафимовна Демьянова, Penza State University of Architecture and Construction str. Titov, 28, Penza, 440028

Doctor of Technical Sciences, Professor, Head of Department

The department "Engineering Ecology"

Алексей Дмитриевич Гусев, Penza State University of Architecture and Construction str. Titov, 28, Penza, 440028

Graduate

The department "Engineering Ecology"

References

  1. Демьянова, В.С. Комплексное использование промышленных отходов //Экология и промышленность России, Москва, 2008. - №1. – С.12-14.
  2. Демьянова В.С., Гусев А.Д. Ресурсосбережение в сфере управления отходами производства и потребления. //Фундаментальные исследования в Пензенской области. Состояния и перспективы. Материалы научно-практической конференции. – Пенза, 2010. С42-44.
  3. Бальзанников М.И., Петров В.П. Экологические аспекты производства строительных материалов из отходов промышленности. // Восьмые академические чтения РАСН «Современное состояние и перспективы развития строительного материаловедения» – Самара, 2004.
  4. Пармухина Е.В. Как склад для изношенных шин превратить в прибыльное предприятие. «Экологический вестник России» №3, 2010. С. 12-14.
  5. Демьянова В.С. и др. Снижение техногенной нагрузки на окружающую среду путем использования отходов автопромышленного комплекса. // Экология урбанизированных территорий – М., 2008. – №4. С86-90.
  6. Демьянова В.С., Гусев А.Д. Перспективы рециклинга автомобильных шин. // «Научный Вестник ВГАСУ. Строительство и архитектура». Воронеж, - 2011.- №4 С.74-80.
  7. Демьянова В.С., Ю.С.Артамонова, А.Д Гусев. Экономическая эффективность рециклинга автомобильных шин./ // Международный технико-экономический журнал. Москва - 2011. № 4 - С.50-55.
  8. Демьянова В.С., Гусев А.Д.. Симакина Г.Н Основные направления рынка черепицы в строительном комплексе Пензенской области //Региональная архитектура и строительство, Пенза, -2012.-№1(12) -С.193-196
  9. «Схемы входного и операционного контроля качества строительно-монтажных работ» «Кровли»/ ФГУП «Центр управления федеральной собственностью», Москва 2002, часть 1, выпуск 4.

Downloads

Published

2012-10-09

How to Cite

Демьянова, В. С., & Гусев, А. Д. (2012). Flexible tile on the basis of powder rubber. Eastern-European Journal of Enterprise Technologies, 5(10(59), 10–13. https://doi.org/10.15587/1729-4061.2012.4633

Issue

Vol. 5 No. 10(59) (2012): Materials technology

Section

Materials Science

License

Copyright (c) 2014 Валентина Серафимовна Демьянова, Алексей Дмитриевич Гусев

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.