Development of the generalized configuration management process mathematical model in project management

Authors

DOI:

https://doi.org/10.15587/1729-4061.2015.47292

Keywords:

configuration, configuration management, project, project management, process, optimization, change, formalization

Abstract

The process of configuration management (CM) in the field of project management (PM) solves the problem of consistency support of the project product and the project itself. The problem is caused by the inevitability of the changes during the project implementation. If the CM processes of specific material objects (project products) are studied deeply enough, the CM processes of the project elements, for example management processes, risks, works, commands, procurement, etc., and, in general, the project itself are investigated only at the conceptual level, and require further work in this direction. In the research, the next step in this direction, namely developing the mathematical, formalized description of the generalized CM process without regard to the object of its application was made. In particular, a formal description of the individual action of the CM process at the abstraction level that allows to present an operation or procedure, or a sub-process in the form of such action was obtained. The classification of actions was introduced, and it was found that the whole CM process can be divided into five groups of actions, each being performed as a response to a specific event. The presence of these groups allows to specify the actions that are executed once, after the object mismatch, periodically and randomly, what is necessary to calculate the performance indices of the process under study. It was also found that the CM process is a set of its embodiments, for which the description scheme was proposed. In addition, the classification of changes in the controlled object, which may occur during its life cycle was introduced.

Author Biography

Сергей Иванович Рудницкий, University of Economics and Law “KROK” st. Lagerna, 30-32, Kyiv, Ukraine, 03113

Postgraduate student

Department of business administration and project management

References

  1. Rukovodstvo k Svodu znanii po upravleniiu proektami. (2004). Rukovodstvo PMBOK®. Ed. 3. USA: Project Management Institute, 388.
  2. Morozov, V., Rudnitskyy, S. (2013). Conceptual model of the configuration management process in projects. Eastern-European Journal Of Enterprise Technologies, 1(10(61)), 187–193. Available: http://journals.uran.ua/eejet/article/view/6766
  3. Practice Standard for Project Configuration Management. (2007). USA: Project Management Institute, 53.
  4. Rudnitskyy, S. (2015). Object configuration management process. Eastern-European Journal Of Enterprise Technologies, 2(3(74)), 15–25. doi:10.15587/1729-4061.2015.39788
  5. Rudnitskyy, S. (2015). Development of object model of the generalized configuration management process in project management. Technology Audit And Production Reserves, 2(3(22)), 38–44. doi:10.15587/2312-8372.2015.41498
  6. MIL-HDBK-61A(SE). Military Handbook. Configuration Management Guidance. (2001, February 7). USA: Department of Defense. Available: http://acqnotes.com/Attachments/MIL-HDBK-61A%20(SE)Configuration%20Management%20Guidance.pdf
  7. EIA-649-B. Configuration Management Standard. (2011). TechAmerica. Available: http://www.techstreet.com/products/1800866
  8. Ratushnyi, R. T., Sydorchuk, O. V., Tymochko, V. O. (2005). Naukovo-metodychni pidstavy upravlinnia konfihuratsiieiu proektu udoskonalennia systemy pozhezhohasinnia u silskomu administratyvnomu raioni. Visnyk Lviv. DAU: Ahroinzhenerni doslidzhennia, 9, 38–47.
  9. Mykhaliuk, M. A. (2008). Obhruntuvannia metodiv i modelei identyfikatsii ta kontroliu konfihuratsii proektiv system tsentralizovanoi zahotivli moloka. L., 20.
  10. Tatomyr, A. V. (2009). Uzghodzhennia konfihuratsii proektiv servisnykh ta obsluhovuvanykh system (stosovno elektrozabezpechennia silskohospodarskykh pidpryiemstv za vykorystannia enerhii vitru). L., 20.
  11. Reilly, M. A. (1995). Spent Nuclear Fuel Project Configuration Management Plan. Available: http://dx.doi.org/10.2172/97000
  12. Naliutin, N. Yu. (2008). Metody i programmnye sredstva upravleniia konfiguratsiiami proektov razrabotki vstroennyh sistem. Moskva, 226.
  13. IEEE Standard for Software Configuration Management Plans. (1998). IEEE Std 828-1998. Available: http://dx.doi.org/10.1109/ieeestd.1998.88281
  14. Vann, J. M. (1996). TWRS Configuration management program plan. Available: http://dx.doi.org/10.2172/662064
  15. Morozov, V. V., Cherednichenko, A. M., Shpilova, T. I.; In: Morozov, V. V.; Un-t ekonomiky ta prava «KROK». (2009). Formuvannia, upravlinnia ta rozvytok komandy proektu (povedinkovoi kompetentsii). K.: Takson, 464.
  16. Bushueva, N. S. (2007). Modeli i metody proaktivnogo upravleniia programmami organizatsionnogo razvitiia. K.: Nauk. svit, 199.
  17. Bushuev, S. D., Yaroshenko, F. A., Tanaka, H. (2012). Upravlenie innovatsionnymi proektami i programmami na osnove sistemy znanii P2M. K.: Sammit-Kniga, 272.
  18. Bushuev, S. D., Morozov, V. V. (1999). Dinamicheskoe liderstvo v upravlenie proektami. K.: VIPOL, 312.
  19. In: Bushuev, S. D. (2010). Kreativnye tehnologii upravleniia proektami i programmami. K.: Sammit-Kniga, 768.
  20. Moreira, M. E. (2010). Adapting Configuration Management for Agile Teams: Balancing Sustainability and Speed. John Wiley & Sons, 302.
  21. Fowler, M. (2003). UML Distilled: A Brief Guide to the Standard Object Modeling Language. Ed. 3. Addison-Wesley, 208.
  22. Venttsel', E. S. (1972). Issledovanie operatsii. M.: Sovetskoe radio, 552.

Published

2015-08-25

How to Cite

Рудницкий, С. И. (2015). Development of the generalized configuration management process mathematical model in project management. Eastern-European Journal of Enterprise Technologies, 4(2(76), 14–22. https://doi.org/10.15587/1729-4061.2015.47292