Experimental research of noises integral converters of tension in chains of galvanic isolation

Authors

  • Володимир Сергійович Кардашук Technological Institute of East Ukraine Volodymyr Dahl University (Severodonetsk) 59 prospect Radyanskyi, Severodonetsk, Lugansk Region, 93400, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5245

Keywords:

transducer, interference, galvanic isolation, interface

Abstract

Galvanic isolation in circuits of the signals transmission and reception is widely used in the communication interface block RS-485. Integrated voltage transducer noises, used in such circuits, are the source of interference and they affect the quality of information transmission via the interface RS-485. The article examines and suggests the methods of reducing the influence of common-mode interferences for integrated voltage transducers produced by Traco Power AG, for their application in galvanic isolation chains RS-485. The research results show that the common-mode interferences generate themselves in the output circuit of integrated voltage transducer, as a result of switching current step of the output transistors. The current step is the result of different opening and closing moment of the output transistors, which leads to the transition process with large amplitude and duration. On the basis of experimental studies the application of Epcos inductive filters along with integrated voltage transducer, which reject interferences, reduces considerably the effect of integrated voltage transducer noises on the quality of signals transmission galvanic isolation circuits and increases the noise immunity of communication interface blocks RS-485

Author Biography

Володимир Сергійович Кардашук, Technological Institute of East Ukraine Volodymyr Dahl University (Severodonetsk) 59 prospect Radyanskyi, Severodonetsk, Lugansk Region, 93400

Associate Professor

Department of Computer Engineering

References

  1. Кардашук, В. С. Використання двоканального блоку інтерфейсу RS-485 [Текст] / В. С. Кардашук // Матеріали IV науково-практичної конференції. «Інформаційні і керуючі системи в промисловості, економіці та екології». – Сєвєродонецьк, 2012. – С. 51-53.
  2. Рязанцев, А. И. Методы повышения надежности передачи данных в сетях на базе интерфейса RS-485 [Текст] / А. И. Рязанцев, В. С. Кардашук // Вісник Східноукраїнського національного університету ім. Володимира Даля. – Луганськ, 2007. – № 4(110), ч. 2. – С. 176–181.
  3. Рязанцев, А. И. Исследование влияния параметров линии связи на качество передачи данных в сетях интерфейса RS-485 [Текст] / А. И. Рязанцев, В. С. Кардашук // Вісник Східноукраїнського національного університету ім. Володимира Даля. – Луганськ, 2007. – № 11(117), ч. 2. – С. 133–140.
  4. DC/DC Converter, Available at: http://www.tracopower.com/fileadmin/medien/dokumente/pdf/datasheets/tma.pdf (accessed November, 2009).
  5. Transformer Driver for Isolated RS-485 Interface, Available at: http://datasheets.maximintegrated.com/en/ds/MAX253.pdf (accessed Document Ref.: 19-0226 Rev 2; May, 2010).
  6. Data and Signal Line Chokes, Available at: http://www.epcos.com/inf/30/db/ind_2008/b82790c0_s0.pdf (accessed April, 2008).

Downloads

Published

2012-12-04

How to Cite

Кардашук, В. С. (2012). Experimental research of noises integral converters of tension in chains of galvanic isolation. Eastern-European Journal of Enterprise Technologies, 6(9(60), 21–25. https://doi.org/10.15587/1729-4061.2012.5245

Issue

Vol. 6 No. 9(60) (2012): Information and controlling system

Section

Information and controlling system

License

Copyright (c) 2014 Володимир Сергійович Кардашук

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.