To question about decline of power-hungryness of process electrolysis of aluminium

Authors

  • Іван Федорович Червоний Zaporozhye State Engineering Academy Lenina 226, Zaporozhye, Ukraine, 69006, Ukraine
  • Геннадій Іванович Щербань Zaporozhye State Engineering Academy Lenina 226, Zaporozhye, Ukraine, 69006, Ukraine
  • Віктор Миколайович Бредіхін Donetsk National Technical University Artema street 58, Donetsk, Ukraine, 83001, Ukraine
  • Микола Олександрович Маняк Donetsk National Technical University Artema street 58, Donetsk, Ukraine, 83001, Ukraine
  • Ігор Євгенович Лукошніков Zaporozhye State Engineering Academy Lenina 226, Zaporozhye, Ukraine, 69006, Ukraine
  • Дмитро Володимирович Прутцков State Scientific-Research Institute of Titanium Lenina 180, Zaporozhye, Ukraine, 69035, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.5721

Keywords:

Aluminum, alumina, electrolyzed, optimization, control

Abstract

Possibility of decline of energy intensity process of aluminum electrolysis is considered during optimization of the magnetohydrodynamic mode of electrolyzed. Periodic adjustment of position of anode with alternation of cycles of automatic serve of alumina revved up circulation of electrolyte

Author Biographies

Іван Федорович Червоний, Zaporozhye State Engineering Academy Lenina 226, Zaporozhye, Ukraine, 69006

Doctor of Technical Sciences, professor, head of

Department of Non-Ferrous Metallurgy

Геннадій Іванович Щербань, Zaporozhye State Engineering Academy Lenina 226, Zaporozhye, Ukraine, 69006

Graduate student

Department of Non-Ferrous Metallurgy

Віктор Миколайович Бредіхін, Donetsk National Technical University Artema street 58, Donetsk, Ukraine, 83001

Ph.D., Senior Fellow, Professor

Department of nonferrous metals and construction materials

Микола Олександрович Маняк, Donetsk National Technical University Artema street 58, Donetsk, Ukraine, 83001

Department of nonferrous metals and construction materials

Ігор Євгенович Лукошніков, Zaporozhye State Engineering Academy Lenina 226, Zaporozhye, Ukraine, 69006

Ph.D., Associate Professor

Department of Non-Ferrous Metallurgy

Дмитро Володимирович Прутцков, State Scientific-Research Institute of Titanium Lenina 180, Zaporozhye, Ukraine, 69035

Doctor of Chemical Sciences, Senior Researcher, Head of the laboratory-riey

References

  1. Grjotheim, K. Aluminum electrolysis / K. Grjotheim [and others]. – Dusseldorf: Aluminum-Verlag, 1982. – 271 p.
  2. Пауль Клемент Ферштрекен (BE), Йозеф Теодор Аэгтен (BE) Сен-сорное устройство, для измерения температуры и способ измерения температуры ликвидуса криолитовых расплавов. Патент РФ №2128826, 1999 г.
  3. Березин А.И. (RU), Турусов С.Н. (RU), Ножко С.И. (RU), Роднов О.О. (RU), Манн В.Х. (RU), Бузунов В.Ю. (RU), Тараканов А.В. (RU), Гриднев А.А. (RU) Патент РФ №2303246 Способ определения температуры ликвидуса расплава электролита в алюминиевом электролизере и устройство для его осуществления. - 2007.
  4. Solheim, S. Rolseth, E. Skybakmoen, L. Støen, Å. Sterten, T. Støre, "Liquidus Temperature and Alumina Solubility in the System Na3AlF6-AlF3-LiF-CaF2-MgF2", Light Metals (1995), 451-460.
  5. R. D. Peterson, A. T. Tabereaux, "Liquidus Curves for the Cryolite-AlF3-CaF2-Al2O3 System in Aluminum Cell Electrolytes", Light Metals (1987), 383-388.
  6. S. S. Lee, K.-S. Lei, P. Xu, J. J. Brown Jr., "Determination of Melting Temperatures and Al2O3 Solubilities for Hall Cell Electrolyte Compositions", Light Metals (1984), 841-855.
  7. E. W. Dewing, "The Chemistry of the Alumina Reduction Cell", Can. Metallurgical Quarterly (1974), 13 (No.4), 607-618.
  8. J. Híveš, J. Thonstad, Å. Sterten, P. Fellner, "Electrical Conductivity of Molten Cryolite-Based Mixtures Obtained with a Tube-Type Cell made of Pyrolytic Boron Nitride", Light Metals (1994), 187-194.
  9. L. Wang, A. T. Tabereaux, N. E. Richards, "The Electrical Conductivity of Cryolite Melts Containing Aluminum Carbide", Light Metals (1994), 177-194.
  10. X. Wang, R. D. Peterson, A. T. Tabereaux, "A Multiple Regression Equation for the Electrical Conductivity of Cryolite Melts", Light Metals (1993), 247-255.
  11. M. Chrenková, V. Danek, A. Silný, T. Utigard, "Density, Electrical Conductivity and Viscosity of Low Melting Baths for Aluminium Electrolysis", Light Metals (1996), 227-232.
  12. G. Choudhary, "Electrical Conductivity for Aluminum Cell Electrolyte between 950 -1025 °C by Regression Equation",J. Electrochem. Soc. (1973), Vol.120, No.3, 381-383.
  13. Г.И. Щербань, И.Е. Лукошников, Д.В. Прутцков, И.Ф. Червоный, О.А. Позднякова. Контроль обратной ЭДС и общего сопротивления алюминиевого электролизера / Восточно-Европейский журнал передовых технологий, 2011. - № 3/6 (51). – С. 14-17.

Downloads

Published

2012-08-20

How to Cite

Червоний, І. Ф., Щербань, Г. І., Бредіхін, В. М., Маняк, М. О., Лукошніков, І. Є., & Прутцков, Д. В. (2012). To question about decline of power-hungryness of process electrolysis of aluminium. Eastern-European Journal of Enterprise Technologies, 4(8(58), 17–21. https://doi.org/10.15587/1729-4061.2012.5721

Issue

Vol. 4 No. 8(58) (2012): Energy-saving technologies and equipment

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Іван Федорович Червоний, Геннадій Іванович Щербань, Віктор Миколайович Бредіхін, Микола Олександрович Маняк, Ігор Євгенович Лукошніков, Дмитро Володимирович Прутцков

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.