Indemnification a reactive-power by Nelder-Mid method in asymmetrical power supply system
DOI:
https://doi.org/10.15587/1729-4061.2012.5781Keywords:
optimization algorithm, balanced condensers, reactive powerAbstract
For improvement of electric energy quality in extended networks important tasks are reactive-power reduction and phase currents balance. The decision of this problem is connecting of compensating condensers the magnitudes of which are regulated by special microprocessor device. Such device allows to computer optimal values of condensers capacitance taking into account the changes of loadings in three-wire system phases.
virtual model of the asymmetrical three-phase system of power supply with the active-inductive loading and compensating condensers united on a chart triangle was developed in MATLAB application. With the use of Nelder-Mid optimization algorithm were found such values of compensating condensers at which the total size of reactive-powers in phases was taken practically to zero, and feed currents in network became symmetric.
The considered algorithm of reactive-power optimization can be applied at development of microprocessor systems which automatically control reactive-power compensators, based on power semiconductor techniqueReferences
- Глушков В. М., Грибин В. П. – Компенсация реактивной мощности в электроустановках промышленных предприятий. М.: Энергия, 1975. – 104 с.
- Жежеленко И. В. Показатели качества электроэнергии на промышленных предприятиях. М.: Энергия, 1977, 125 с.
- Железко Ю. С. Компенсация реактивной мощности и повышение качества электроэнергии. – М.: Энергоатомиздат, 1985. – 224 с.
- Минин Г. П. Реактивная мощность. – М.: Энергия, 1978. – 88 с.
- Статические компенсаторы для регулирования реактивной мощности. Под ред. Р. М. Матура: Пер. с англ. – М.: Энергоатомизат, 1987. – 160 с.
- Супрунович Г. – Улучшение коэффициента мощности преобразовательных установок.: Пер. с польск. – М.: Энегоатомизат, 1985. – 136 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Екатерина Валериевна Ягуп
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
