Experimental investigation of wave load on the upper structure of hydraulic structures

Authors

  • Станислав Иванович Рогачко Odessa National Maritime University 42 Mechnikov str., Odessa, Ukraine, 65029, Ukraine https://orcid.org/0000-0003-1421-2242
  • Ирина Николаевна Панова Odessa State Academy of Construction and Architecture 4 Didrihsone str., Odessa, Ukraine, 65029, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2016.59889

Keywords:

through-type hydraulic structure, upper structure, vertical component of wave load

Abstract

The vertical component of the wave load acting on the model of the upper structure of the hydraulic structure is experimentally investigated. The results of processing of the experimental data using the least squares method are presented. A graphical interpretation of the experimental results is given. The estimated dependencies for determining the resultant of the vertical component of the wave load on the upper structure of the through-type structures in the steepness range of the wave, studied in the experiment are obtained. They show that the required load is directly proportional to the wave amplitude and the length of the model in the wave beam direction, and also depends on the clearance-to-wavelength ratio. Examples of calculation of the required load are given. Recommendations on the use of the results of the experimental investigation for inclusion in the regulations are proposed.

Author Biographies

Станислав Иванович Рогачко, Odessa National Maritime University 42 Mechnikov str., Odessa, Ukraine, 65029

Doctor of Technical Sciences, Professor

Department of "sea and river ports, offshore facilities, waterways and their technical operation"

Ирина Николаевна Панова, Odessa State Academy of Construction and Architecture 4 Didrihsone str., Odessa, Ukraine, 65029

Department of "Energy and water management construction"

References

  1. SNyP 2.06.04-82*. Nagruzky y vozdejstvyya na gydrotexnycheskye sooruzhenyya (volnovie, ledovie y ot sudov) Aktualyzyrovannaya redakcyya (2012). Moscow.
  2. Rogachko, S. Y. (2005). Opredelenye otmetky nyza verxnego stroenyya morskyx neftegazopromislovix gydrotexnycheskyx sooruzhenyj. Gydrotexnycheskoe stroytelstvo, 7, 15.
  3. Svod pravyl. proektyrovanye morskyx ledostojkyx platform. Part I. Klassyfykacyya, osnovnie polozhenyya, trebovanyya k nagruzkam y vozdejstvyyam. Ostojchyvost. SP – 33 – 10100 (2001). Moscow.
  4. Noskov, B. D., Pravdyvecz, Yu. P. (2004). Sooruzhenyya kontynentalnogo shelfa. Moscow: ASV, 162, 194.
  5. Chacrabarti, S. K. (1994). Hydroddynamics of Offshore Structures. WIT Press (UK), 464.
  6. Turgut, S. S. (2014). Wave Forcer on Offshore Structures. Cambridge University Press New York.
  7. Leshhenko, S. V., Makarov, K. N. (2013). Metodyka rascheta vertykalnix gydrodynamycheskyx volnovix nagruzok na goryzontalnie elementi morskyx gydrotexnycheskyx sooruzhenyj. Gydrotexnyka, 2 (31), 20–25.
  8. Rogachko, S. Y., Panova, Y. N. (2015). Eksperymentalnaya ustanovka dlya yzmerenyya vertykalnoj sostavlyayushhej volnovoj nagruzky y volnovogo davlenyya na modely verxnego stroenyya gydrotexnycheskyx ssoruzhenyj. Patent na yzobretenye № 108448. Kyiv.
  9. Panova, Y. N. (2014). Eksperymentalnie yssledovanyya volnovoj nagruzky na verxnee stroenye gydrotexnycheskyx sooruzhenyj. Visnyk Odeskoyi derzhavnoyi akademiyi budivnycztva ta arxitektury, 56, 260.
  10. Pavlenko, G. K. (1956). Soprotyvlenye vodi dvyzhenyyu sudna. Morskoj transport. Moscow, 507.
  11. DBN V.1.2 – Nagruzky y vozdejstvyya Mynstroj Ukrayni (2006). Kyiv.
  12. SNyP 2.01.07-85* Nagruzky y vozdejstvyya (1985). Gosstroj SSSR, Moscow.
  13. MNK i regressionnyj analiz Onlajn + grafiki. Available at: http://mathhelpplanet.com/static.php?p=onlayn-mnk-i-regressionniy-analiz

Downloads

Published

2016-02-21

How to Cite

Рогачко, С. И., & Панова, И. Н. (2016). Experimental investigation of wave load on the upper structure of hydraulic structures. Eastern-European Journal of Enterprise Technologies, 1(7(79), 10–16. https://doi.org/10.15587/1729-4061.2016.59889

Issue

Vol. 1 No. 7(79) (2016): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2016 Станислав Иванович Рогачко, Ирина Николаевна Панова

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.