Estimation a reliability and safety of information and controlling system RTP 3000 by RAM Commander

Authors

  • Леонід Деонісійович Озірковський Lviv Polytechnic National University S. Bandery 12, Lviv, 79000, Ukraine
  • Тарас Іванович Панський Lviv Polytechnic National University S. Bandery 12, Lviv, 79000, Ukraine
  • Олександр Васильович Сидорчук Lviv Polytechnic National University S. Bandery 12, Lviv, 79000, Ukraine
  • Ігор Володимирович Кулик Lviv Polytechnic National University S. Bandery 12, Lviv, 79000, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.6002

Keywords:

reliability, safety, FMEA, realiability block diagram, fault tree

Abstract

The article includes the methodology for estimation of safety indexes and reliability responsible destination system RTP 3000. Was selected the appropriate software. Estimation of reliability and safety indexes was performed using software RAM Commander. This software takes into account the model and recommendations for estimation of reliability and safety and meets the requirements such standards as: MIL-217, MIL-HDBK-217, Telcordia, FIDES, NPRD-95, MIL-STD-1629, CNET 2000, TR332-Bellcore Issue 6 , Prism, NSWC-98, GJB299. Verification of the system was carried out in the software module ASNA. The article includes the description of object and application in different industrial areas. Step by step methodology was selected for estimation  the system safety index, starting from reliability block diagram (RBD), fault tree analysis (FTA), which gives the opportunity to build Failure Mode and Effects Analysis (FMEA). Calculated RPN value satisfies the boundary conditions

Author Biographies

Леонід Деонісійович Озірковський, Lviv Polytechnic National University S. Bandery 12, Lviv, 79000

Ph.D, Associated profesor

Department of Theoretical Radioengineering and Radiomeasurements

Тарас Іванович Панський, Lviv Polytechnic National University S. Bandery 12, Lviv, 79000

Student

Department of Theoretical Radioengineering and Radiomeasurements

Олександр Васильович Сидорчук, Lviv Polytechnic National University S. Bandery 12, Lviv, 79000

Student

Department of Theoretical Radioengineering and Radiomeasurements

Ігор Володимирович Кулик, Lviv Polytechnic National University S. Bandery 12, Lviv, 79000

Postgraduate

Department of Theoretical Radioengineering and Radiomeasurements

References

  1. RTP corporation [Електронний ресурс] – Режим доступу: www/ URL: http://www.rtpcorp.com/.
  2. А. Строганов. Обзор программных комплексов по расчёту надёжности сложных технических систем. / А. Строганов, В. Жаднов, С. Полесский. // «Компоненты и технологии», № 5 (70), 2007. — с. 74—81.
  3. A.L.D. Advanced logistics development [Електронний ресурс] – Режим доступу: www/ URL: http://www.aldservise.com/en/reliability-products/rams-software.html.
  4. Henley E., and H. Kumamoto. 1981. Reliability Engineering and Risk Assessment. Englewood Cliffs, N.J.: Prentice Hall
  5. Волочій Б.Ю. Технологія моделювання алгоритмів поведінки інформаційних систем/ Б.Ю. Волочій. -Львів: Вид-во НУ“Львівська політехніка”, 2004. - 220с.
  6. Половко, А.М. Основы теории надежности [Текст] / А.М. Половко, С.В. Гуров. - СПб.: БХВ-Петербург, 2006. - 702 с
  7. Николаева Н.Г. FMEA – анализ видов и последствий отказов [Текст]: учеб, пособие/ Н.Г. Николаева, С.М. Горюнова – К.: КГТУ, 2007. – 96с.

Downloads

Published

2012-12-25

How to Cite

Озірковський, Л. Д., Панський, Т. І., Сидорчук, О. В., & Кулик, І. В. (2012). Estimation a reliability and safety of information and controlling system RTP 3000 by RAM Commander. Eastern-European Journal of Enterprise Technologies, 6(11(60), 37–40. https://doi.org/10.15587/1729-4061.2012.6002

Issue

Vol. 6 No. 11(60) (2012): Radio engineering information tools

Section

Radio engineering information tools

License

Copyright (c) 2014 Леонід Деонісійович Озірковський, Тарас Іванович Панський, Олександр Васильович Сидорчук, Ігор Володимирович Кулик

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.