Research into parameters of energy loss when trains influence the track with wooden sleepers
DOI:
https://doi.org/10.15587/1729-4061.2016.85851Keywords:
dissipative forces, equivalent coefficient of dissipation, empirical dependences of changes, rail supportsAbstract
The magnitude that quantitatively characterizes the process of interaction between the track and the rolling stock was determined as equivalent coefficient of dissipation (ECD). This coefficient, as an estimated magnitude, takes into account all kinds of friction forces in the process of dissipation – the forces of dry friction that depend on the deformation of the track structure, as well as viscous friction forces that depend on deformation velocity, and, possibly, other types of friction forces. These forces exert considerable effect on the characteristics of strength of a railway track and, therefore, on the safety of motion, which is why the research in this paper is quite relevant.
Theoretical positions are presented that allow us to determine a mathematical formula for the calculation of ECD for rail supports of railway track.
We detected the values of vertical and horizontal transverse ECD for the wooden sleepers, for which we used data of experimental studies carried out at 12 sections of Ukrainian railways with different operational conditions. Based on these data, dependence was established of ECD of rail supports in the vertical and horizontal plane on the magnitude of tonnage that passed the track. Results of the experiments indicate that with an increase in tonnage from 0 to 300 million tons, values of coefficients of dissipation in the vertical plane increase by 1.5–1.9 times, and in the horizontal plane – by about 1.3 times.
Based on the aforementioned, there is a possibility of practical use of ECD to determine the current state of the track and a need for repair work.References
- Danіlenko, E. І. (2010). Zalіznichna kolіya. Ulashtuvannya, proektuvannya і rozrakhunki, vzaemodіya z rukhomim skladom. In 2 vo;umes. Vol. 1. Kyiv: Іnpres, 528.
- Malіshevs'ka, A. S., Fast, D. A. (2015). Formuvannya prostorovoi zhorstkostі reykovikh opor metropolіtenu. Mir nauki i innovatsiy, 2 (2), 48–55.
- Yakovlev, V. F., Semenov, I. I., Frolov, A. I., Poletaev, V. I. (1977). Issledovaniya uprugo-dinamicheskikh kharakteristik puti v gorizontal'noy ploskosti. Trudy VNIIZhT, 280, 82–99.
- Tuley, Yu. L. (2015) Analіz prostorovoi zhorstkostі skrіplen' DO. UkrDUZT, 157, 82–85.
- Guan-sin', F. (1993). Koeffitsient neuprugogo soprotivleniya puti. Put' i putevoe khozyaystvo, 1, 26–27.
- Darens'kiy, O. M., Vіtol'berg, V. G., Bugaets, N. V. (2010). Viznachennya privedenoi vertikal'noi zhorstkostі reykovoi nitki pri vikoristannі rozrakhunkovoi skhemi yak balki na pruzhnikh oporakh z vipadkovimi kharakteristikami. UkrDAZT, 115, 151–162.
- Bogacz, R., Konowrocki, R. (2012). On new effects of wheel-rail interaction. Archive of Applied Mechanics, 82 (10-11), 1313–1323. doi: 10.1007/s00419-012-0677-6
- Wang, K., Huang, C., Zhai, W., Liu, P., Wang, S. (2014). Progress on wheel-rail dynamic performance of railway curve negotiation. Journal of Traffic and Transportation Engineering (English Edition), 1 (3), 209–220. doi: 10.1016/s2095-7564(15)30104-5
- Dailydka, S., Lingaitis, L. P., Myamlin, S., Prichodko, V. (2008). Modelling the interaction between railway wheel and rail. Transport, 23 (3), 236–239. doi: 10.3846/1648-4142.2008.23.236-239
- Otero, J., Martinez, J., de los Santos, M. A., Cardona, S. (2011). A mathematical model to study railway track dynamics for the prediction of vibration levels generated by rail vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 226 (1), 62–71. doi: 10.1177/0954409711406837
- Darenskiy, A. N. (2010). Rezul'taty opredeleniya prostranstvennykh neuprugikh soprotivleniy zhelezobetonnogo puti deformatsiyam dlya usloviy promyshlennogo transporta. ІKS ZT, 5-6, 78–82.
- Darens'kiy, O. M., Vіtol'berg, V. G. (2007). Eksperimental'ne viznachennya pruzhnikh kharakteristik prokladok promіzhnogo skrіplennya KB. UkrDAZT, 87, 172–178.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 Yusef Tuley, Natalia Bugaets, Alina Malishevskaya
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
