Experimental study of non-newtonian fluids in conical annular channels
DOI:
https://doi.org/10.15587/1729-4061.2013.9369Keywords:
conical annular channel, current, abnormally viscous fluid, hydraulic resistance.Abstract
Intensive development of chemical technology makes current problems of hydrodynamics flow abnormally viscous fluids in cylindrical annular channels and conical annular channels. Feature of such flows is the need to consider the influence of the flow not only reological properties of the fluid, but also the effect of the inertial forces of the convective acceleration.This article has one of the first attempts to conduct similar investigations of and to obtain views and recommendations on how to calculate the parameters of such flows. In the basis of work the experimental studies to allow a physical simulation of hydrodynamics flow in doubly connected domains with different angles of taper forming surfaces.
The article presents the resulting experimental dependence, characterized by a loss of energy in conical annular channels, depending on the rheological properties of model fluids and their offers on the basis of the calculation of the coefficient of hydraulic friction. Are presented according to the coefficient of hydraulic friction λ of the Reynolds number Re for conical annular channels with various law changes the cross-section along its length. Such studies may be useful in the design-governmental equipment for the processing of polymeric materials in the extrusion line.
References
- Торнер, Р.В. Основные процессы переработки полимеров (теория и методы расчета) [Текст] / Р.В. Торнер.- М.: Химия, 1972.- 456 с.
- Технология нанесения покрытий на поверхности [Текст]/О.М. Яхно, С.Г. Кравченко, В.С.Кривошеев, А.П. Полывяный, В.С. Бочковский.-К.: Техніка, 1993.-120 с.
- Яхно, О.М. Основы реологии полимеров [Текст] / О.М. Яхно, В.Ф. Дубовицкий.- К.: Издательское объединение «Вища школа», 1976.- 188 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Олег Михайлович Яхно, Вячеслав Семенович Кривошеев, Дмитрий Николаевич Кашуба, Олег Вячеславович Кривошеев
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
