Determination of elastoplastic coefficient of shock interaction of spherical indenter with deformable halfspace

Authors

  • Алексей Владимирович Горик Poltava State Agrarian Academy 1/3 Skovorody str., Poltava, 36003, Ukraine
  • Станислав Богданович Ковальчук Poltava State Agrarian Academy 1/3 Skovorody str., Poltava, 36003, Ukraine
  • Григорий Анатольевич Шулянский Scientific and Technical Center “Vira” Zhovtneva 43, Poltava, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.9377

Keywords:

process, shot-blast cleaning, indenter, deformable half-space, elastoplastic coefficient.

Abstract

Erosive wear due to contact of metal surfaces with flying solid particles is a typical problem of machinery. The intensity of wear depends on the hardness of the material of wearing surface and the kinetic energy of moving solid particles. A measure of wear is associated with the parameters of the track left by a particle on the surface of parts. Thus the problem of linking of these components of the process of shock interaction of counter-bodies arises.
On the basis of the elastoplastic model of shock interaction of a solid particle with a flat metal surface we have created a method of determining the coefficient, which characterized the elastoplastic properties of deformable half-space at dynamic imbedding of a spherical indenter in it. This allowed predicting the intensity of erosive wear. The coefficient was determined on the basis of existing or special laboratory results of studies of shock embedding of the indenter into prototypes, and on the basis of laboratory analytical calculations. This allowed us to summarize the available experimental data on the current input parameters of the considered process. The elastoplastic coefficient depends on the initial velocity and the diameter (mass) of attacking body and on the hardness of the material of the attacked half-space.

Author Biographies

Алексей Владимирович Горик, Poltava State Agrarian Academy 1/3 Skovorody str., Poltava, 36003

Professor

Department of Technical Disciplines

Станислав Богданович Ковальчук, Poltava State Agrarian Academy 1/3 Skovorody str., Poltava, 36003

Assistant

Department of Technical Disciplines

Григорий Анатольевич Шулянский, Scientific and Technical Center “Vira” Zhovtneva 43, Poltava

Leading engineer

References

  1. Саверин, М.М. Дробеструйный наклеп [Текст] / М.М. Саверин. – М.: Машгиз, 1955. – 312с.
  2. Дрозд, М.С. Инженерные расчеты упругопластической контактной деформации [Текст] / М.С. Дрозд, М.М. Матлин, Ю.И. Сидякин. – М.: Машиностроение, 1986. – 224с.
  3. Пановко, Я.Х. Введение в теорию механического удара [Текст] / Я.Х. Пановко – М.: Наука, 1977. – 224с.
  4. Богомолов, Н.И. Исследование деформации металла при абразивных процессах под действием единичного зерна [Текст] / Н.И. Богомолов // Труды ВНИИАШ, №7, С.74-88. - Л.: Машиностроение, 1968. - 123с.
  5. Кильчевский, Н.А. Теория соударения твердых тел [Текст] / Н.А. Кильчевский – К.: Наукова думка, 1969. – 246с.
  6. Горик, О.В. Взаємодія індентора з металевою поверхнею при дробеструменевій обробці [Текст] / О.В. Горик, А.А. Ландар, С.Б. Ковальчук, Г.А. Шулянський // Технологічний аудит та резерви виробництва – Х.: Технологічний Центр, 2011. – №1(1) – С.25-29.
  7. Шапошников, Н.А. Механические испытания металлов [Текст] / Н.А. Шапошников – М.-Л.: Машгиз, 1954. – 443с.

Published

2013-02-05

How to Cite

Горик, А. В., Ковальчук, С. Б., & Шулянский, Г. А. (2013). Determination of elastoplastic coefficient of shock interaction of spherical indenter with deformable halfspace. Eastern-European Journal of Enterprise Technologies, 1(7(61), 56–59. https://doi.org/10.15587/1729-4061.2013.9377

Issue

Section

Applied mechanics