Jenő Gubicza

Eötvös Loránd University, Hungary
Professor, PhD
Department of Materials Physics

Scopus profile: link
Researcher ID: FZN-6540-2022
Google Scholar profile: link
ID ORCID: http://orcid.org/0000-0002-8938-7293

Selected Publications:

  1. Guennec, B., Hattal, A., Hocini, A., Mukhtarova, K., Kinoshita, T., Horikawa, N., Gubicza, J., Djemaï, M., Dirras, G. (2022). Fatigue performance of zirconia-reinforced Ti-6Al-4V nanocomposite processed by laser powder bed fusion: An improvement by hot isostatic pressing. International Journal of Fatigue, 164, 107129. doi: https://doi.org/10.1016/j.ijfatigue.2022.107129

  2. El-Tahawy, M., Péter, L., Kiss, L. F., Gubicza, J., Czigány, Z., Molnár, G., Bakonyi, I. (2022). Anisotropic magnetoresistance (AMR) of cobalt: hcp-Co vs. fcc-Co. Journal of Magnetism and Magnetic Materials, 560, 169660. doi: https://doi.org/10.1016/j.jmmm.2022.169660 

  3. Kishore, K., Chandan, A. K., Hung, P. T., Kumar, S., Kawasaki, M., Gubicza, J. (2022). On the enhanced hardening ability and plasticity mechanisms in a novel Mn-added CoCrNi medium entropy alloy during high-pressure torsion. Journal of Alloys and Compounds, 904, 163941. doi: https://doi.org/10.1016/j.jallcom.2022.163941 

  4. Khaleghi, A. A., Akbaripanah, F., Sabbaghian, M., Máthis, K., Minárik, P., Gubicza, J. et. al. (2021). Influence of high-pressure torsion on microstructure, hardness and shear strength of AM60 magnesium alloy. Materials Science and Engineering: A, 799, 140158. doi: http://doi.org/10.1016/j.msea.2020.140158 

  5. Hung, P. T., Kawasaki, M., Han, J.-K., Lábár, J. L., Gubicza, J. (2021). Microstructure evolution in a nanocrystalline CoCrFeNi multi-principal element alloy during annealing. Materials Characterization, 171, 110807. doi: http://doi.org/10.1016/j.matchar.2020.110807 

  6. Krajňák, T., Janeček, M., Minárik, P., Gubicza, J., Hung, P. T., Nový, F. et. al. (2020). Microstructure Evolution in Cu–0.5 wt% Zr Alloy Processed by a Novel Severe Plastic Deformation Technique of Rotational Constrained Bending. Metals, 11 (1), 63. doi: http://doi.org/10.3390/met11010063 

  7. Heczel, A., Akbaripanah, F., Salevati, M. A., Mahmudi, R., Vida, Á., Gubicza, J. (2018). A comparative study on the microstructural evolution in AM60 alloy processed by ECAP and MDF. Journal of Alloys and Compounds, 763, 629–637. doi: http://doi.org/10.1016/j.jallcom.2018.06.002 

  8. Kolonits, T., Jenei, P., Péter, L., Bakonyi, I., Czigány, Z., Gubicza, J. (2018). Effect of bath additives on the microstructure, lattice defect density and hardness of electrodeposited nanocrystalline Ni films. Surface and Coatings Technology, 349, 611–621. doi: http://doi.org/10.1016/j.surfcoat.2018.06.052 

  9. Gubicza, J., Jenei, P., Nam, K., Kádár, C., Jo, H., Choe, H. (2018). Compressive behavior of Cu-Ni alloy foams: Effects of grain size, porosity, pore directionality, and chemical composition. Materials Science and Engineering: A, 725, 160–170. doi: http://doi.org/10.1016/j.msea.2018.04.018 

  10. Heczel, A., Kawasaki, M., Ugi, D., Jang, J., Langdon, T. G., Gubicza, J. (2018). The influence of chemical heterogeneities on the local mechanical behavior of a high-entropy alloy: A micropillar compression study. Materials Science and Engineering: A, 721, 165–167. doi: http://doi.org/10.1016/j.msea.2018.02.087 

  11. El-Tahawy, M., Pereira, P. H. R., Huang, Y., Park, H., Choe, H., Langdon, T. G., Gubicza, J. (2018). Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing. Materials Letters, 214, 240–242. doi: http://doi.org/10.1016/j.matlet.2017.12.040 

  12. Máthis, K., El-Tahawy, M., Garcés, G., Gubicza, J. (2018). Evolution of the Dislocation Structure During Compression in a Mg–Zn–Y Alloy with Long Period Stacking Ordered Structure. The Minerals, Metals & Materials Series, 385–389. doi: http://doi.org/10.1007/978-3-319-72332-7_60 

  13. Kvackaj, T., Kovacova, A., Kocisko, R., Bidulska, J., Lityńska–Dobrzyńska, L., Jenei, P., Gubicza, J. (2017). Microstructure evolution and mechanical performance of copper processed by equal channel angular rolling. Materials Characterization, 134, 246–252. doi: http://doi.org/10.1016/j.matchar.2017.10.030