Methods of monitoring motion parameters of winders

Authors

  • Віталій Юрійович Ларін National technical university of Ukraine “Kyiv Polytechnic Institute”, 37, Prospect Peremohy, 37, Kyiv-56, 03056, Ukraine https://orcid.org/0000-0002-5042-2426

DOI:

https://doi.org/10.15587/1729-4061.2014.26272

Keywords:

ferromagnetic transformer, winder, speed, depth

Abstract

The paper considers the shortcomings of existing selsyn sensors, used in the monitoring and control system of winder for measuring the speed and depth of the cage. To eliminate the disadvantages of the existing control method of the specified motion parameters, two new parameter measurement methods - both suggest using non-contact measurement method based on ferromagnetic transformers, belonging to the group of electromagnetic transducers are proposed. The first method can be applied at the coal mining enterprises with the ground mounting of winder; the second method is versatile since it can be used in both ground, and tower (copra) mounting of the winder. These methods differ in the mounting place of the transducers. In addition, implementing the second method require using an additional structural element of the measuring channel of the system - belts with driving elements. Implementing the proposed mounting methods allows to improve the measurement accuracy of both speed, and depth of winder due to eliminating the influence of backlash on the measurement process, and increase the longevity of the measurement subsystem by using the non-contact method that will allow to extend the service life of transducers.

Author Biography

Віталій Юрійович Ларін, National technical university of Ukraine “Kyiv Polytechnic Institute”, 37, Prospect Peremohy, 37, Kyiv-56, 03056

Doctor of Science (Engineering), Professor,

Information and measurement technique department

References

  1. Batitckii, V. A. Kuroedov, V. I., Ryzhkov, A. A. (1991). Automation of industrial processes and engineering process automatic control system in mining [Avtomatizatciia proizvodstvennykh processov i ASU TP v gornoi promyshlennosti]. Moscow : Nedra, 303.
  2. The control panel of mine hoist PSHP.1M with UGS1 [Pult shakhtnogo podyoma PSHP.1M s UGS1]. The website of the Shtrih-M ltd. Available: http://shtrih-m.kuzbass.ru/production/100/item/16. (Last access: 27 June 2014).
  3. Mine winders and hoists (1989). [Shakhtnye podyomnie mashyni I lebedki] TSNIITIAZHMASH trade magazine. Moscow, TSNIITIAZHMASH, 26–27.
  4. Asch, G., Andre, P., & Zelbstein, U. (1991). The sensors of measurement systems. [Les capteurs en instrumentation industrielle]. Vol. 1. Lion, Dunod. 391.
  5. Profos, P. (1990). Measurement in industries. Vol. 3. The measurement methods and devises [Izmereniia v promyshlennosti. Kn.3. Sposoby izmereniia I apparatura]. Moscow, Metallurgiia, 344.
  6. Friden, John (2004). Handbook of modern sensors. Physics designs and applications. New-York, Springer. 524. doi:10.1007/b97321
  7. Larin, V. Y. (2007). Basics of designing of devises and systems with ferri- and ferromagnetic transformers [Osnovi postroeniya priborov i system s ferri- i ferromagnitnimi preobrazovatelyami]. Donetsk, Weber, 367.
  8. Larin, V. Y. (2009). Development of mathematical model of the ferromagnetic transducer sensitive element [Razrabotka matematicheskoi modeli chuvstvitelnogo elementa ferrimagnitnogo preobrazovatelia]. Eastern-European Journal of Enterprise Technologies, 2/6 (38), 52–55.
  9. Kharchenko, V. P., Kvasnikov, V. P. (12.10.09). Patent of Ukraine 44406, IPC 6 G01C 23/00. The method of measurement of the hoisting depth and speed at ground-based winder [Sposib vymiriuvannia shvydkosti rukhu I glybyny zanurennia kliti pry nazemnii ustanovci pidiomnoi mashini]. request 09.12.2008, № 19, 6.
  10. Larin, V. J., Kharchenko, V. P., Kvasnikov, V. P. (11.03.13). Patent of Ukraine 101223, IPC 6 G01C 23/00. The universal method of measurement of the hoisting depth and speed [Universalnii sposib vymiriuvannia shvydkosti rukhu I glybyny zanurennia kliti]. request 20.04.2011; published, № 5, 6.
  11. LDC1000 – inductance to digit from Texas Instruments [LDC1000 – inductyvnist’ v tcifru ot Texas Instruments]. The website of the Compel ltd. Available at: http://www.compel.ru/2014/06/30/ldc1000-induktivnost-v-tsifru-ot-texas-instruments/. Last access: 28 June 2014.

Downloads

Published

2014-07-18

How to Cite

Ларін, В. Ю. (2014). Methods of monitoring motion parameters of winders. Eastern-European Journal of Enterprise Technologies, 4(9(70), 14. https://doi.org/10.15587/1729-4061.2014.26272

Issue

Vol. 4 No. 9(70) (2014): Information and controlling system

Section

Information and controlling system

License

Copyright (c) 2014 Віталій Юрійович Ларін

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.