Examining the effect of physical fields on the adhesive strength of protective epoxy composite coatings
DOI:
https://doi.org/10.15587/1729-4061.2017.103128Keywords:
epoxy composition, ultrasonic treatment, electromagnetic field, highly dispersed filler, residual stressesAbstract
We examined and substantiated the effect of treating the compositions in the electromagnetic field and with ultrasound on the adhesive strength of epoxy composites that contain highly dispersed particles of ferro-, para- and diamagnetic nature. It was established experimentally that the optimal content of highly dispersed fillers is 6 mass fractions.
The studies conducted confirm the prospects of using the treatment of compositions in physical fields for obtaining epoxy composite protective coatings. The given technology enables to ensure high adhesive strength (60–70 MPa) of bonds between a coating and a metal base, to increase the degree of structuring (G=99.7 %) and to reduce by 65 % internal stresses in coatings. We achieved an increase in the number of physical-chemical bonds between an epoxy polymer binder and the surface of highly dispersed particles by increasing the mobility of segments of macromolecules and improving the interaction between components of the system under the influence of external physical fields.
By using the electron microscopy method, we registered a uniform distribution of ferro- and paramagnetic particles in epoxy composites after treating the compositions in the electromagnetic field. This occurs due to the orientation of the dipole segments of macromolecules in a force field and the uniform distribution of chemical bonds in the structure of epoxy composite.
The received epoxy composite coatings with highly dispersed powders after treating the compositions in the physical field are characterized by defect-free structure. Epoxy composite coatings could be used as wear- and corrosion resistant coatings for parts of machines and mechanisms in automotive and instrument-making industries, as well as in the oil and gas sector. Such parts can operate under conditions of temperature gradient, mechanical stresses, deformations and aggressive impacts.
References
- Buketov, A. V., Krasnen’kyi, V. M. (2013). Influence of the range of particle sizes of the filler on the adhesion strength and residual stresses in epoxy composites. Materials Science, 48 (4), 521–530. doi: 10.1007/s11003-013-9533-2
- Buketov, A. V., Karpenko, Yu. A., Sapronov, O. O., Skirdenko, V. O. (2012). Effect of pulsed magnetic field on properties of epoxy nanocomposites. Metallurgy, 51 (3), 385–390.
- Sapronov, O., Nigalati, V., Smyrnov, I., Dolgov, M. (2013). Vplyv vmistu i pryrody dribnodyspersnogo napovnyuvacha na mehanichni vlastyvosti i strukturu polimernyh zahysnyh pokryttiv. Visnyk HDMA, 2 (9), 228–237.
- Sapronov, O. O. (2013). Doslidzhennya pryrody khimichnykh i fizychnykh zv’yazkiv epoksydnykh nanokompozytiv metodom ICh-, EPR-spektral'noho analizu ta optychnoyi mikroskopiyi. Naukovi notatky, 43, 62–73.
- Levyts'kyy, V. (2006). Doslidzhennya kinetyky tverdinnya epoksykompozytiv pislya ul'trafioletovoho oprominennya. Visnyk TDTU, 11 (2), 132–134.
- Bilyy, L., Isayev, E., Leonov, V. et. al. (2011). Doslidzhennya vplyvu enerhetychnykh poliv na vlastyvosti epoksydnykh kompozytiv. Visnyk Ternopil's'koho natsional'noho tekhnichnoho universytetu, 187–192.
- Miura, K., Tsuda, D., Itamura, N., Sasaki, N. (2007). Superlubricity of Fullerene Intercalated Graphite Composite. Japanese Journal of Applied Physics, 46 (8A), 5269–5274. doi: 10.1143/jjap.46.5269
- Potschke, P., Kretzschmar, B., Janke, A. (2007). Use of carbon nanotube filled polycarbonate in blends with montmorillonite filled polypropylene. Composites Science and Technology, 67 (5), 855–860. doi: 10.1016/j.compscitech.2006.02.034
- Garkusha, O. M., Mahno, S. N., Prihod'ko, G. P., Cemencov, Yu. I. (2008). Kineticheskie svoystva kompozitov politetraftorehtilen. Himiya, fizika i tekhnologiya poverhnosti, 14, 140–146.
- Usenko, A. A., Korskanov, V. V., Davydenko, V. V. et. al. (2011). Teplofizychni vlastyvosti i termodynamika nanokompozytiv na osnovi epoksydnoho polimeru ta karbonanotrubok. Polimernyy zhurnal, 4, 328–333.
- Nizina, T. A., Kislyakov, P. A., Kuznecov, N. M. (2009). Eksperimental'nye issledovaniya uprugo-prochnostnyh harakteristik ehpoksidnyh kompozitov, modificirovannyh nanochasticami. Stroitel'stvo, arhitektura, dizayn, 1 (5), 23–32.
- Xu, Y., Ray, G., Abdel-Magid, B. (2006). Thermal behavior of single-walled carbon nanotube polymer–matrix composites. Composites Part A: Applied Science and Manufacturing, 37 (1), 114–121. doi: 10.1016/j.compositesa.2005.04.009
- Muradyan, V. E., Sokolov, E. A., Babenko, S. D., Moravskiy, A. P. (2010). Diehlektricheskie svoystva kompozitov, modificirovannyh uglerodnymi nanostrukturami, v mikrovolnovom diapazone. Zhurn. tekhn. Fiziki, 80 (2), 83–87.
- Prabhu, T. N. (2012). Thermal Degradation of HDPE Short Fibers Reinforced Epoxy Composites. IOSR Journal of Applied Chemistry, 2 (1), 39–44. doi: 10.9790/5736-0213944
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2017 Vitalii Kashytskyi, Petro Savchuk, Viktoria Malets, Yuliia Herasymiuk, Serhii Shchehlov
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
