Computer geometric modeling of the guiding device with continuous transfer area

Authors

  • Анна Вікторівна Марченко Sumy State University 2 Rimsky-Korsakov Str., Sumy, 40007, Ukraine, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12386

Keywords:

Guiding device, geometric modelling, system analysis

Abstract

The article deals with 3D geometric modelling of a radial-flow pump intermediate stage. The process described in the article uses modern engineering CAD (computer-aided design) system. A continuous-transfer-area guiding device being the most widespread design concept for radial-flow pumps, it is chosen the object of the research.

Individual blocks are separated on the basis of a system analysis of the research object and a block-module approach to the modeling process. The process of developing a solid model is divided into separate stages, which provide for obtaining full-fledged model of the guiding device pre-selected blocks. Special attention is paid to geometric relationships to provide for easy upgrading and restructuring the blocks.

To illustrate the research results there are given the main stages of the block-modelling with the help of Solid Works.

The technique is multi-purpose and can be realized by means of other CAD applications, as well as for researching guiding devices of various design concepts

Author Biography

Анна Вікторівна Марченко, Sumy State University 2 Rimsky-Korsakov Str., Sumy, 40007, Ukraine

Ph.D., assistant of professor

Department of Computer Science, Section of Information Technologies

References

  1. Антонов, А.В. Системный анализ [Текст] / А. В. Антонов. – М.: Высшая школа.– 2004. – 454 с.
  2. Марченко, А.В. Аспекти комп’ютерного геометричного моделювання напрямних апаратів багатоступеневих відцентрових насосів. Геометричне та комп’ютерне моделювання [Текст] / збірник наукових праць: редкол.: Ю.М. Тормосов (відпов.ред.) та ін..; Харк.держ.університет харчування та торгівлі.– Харків, 2010.– Вип.27. – 165 с.: іл., табл..
  3. Малюшенко, В.В. Энергетические насосы: Справочное пособие [Текст] / В. В. Малюшенко, А.К. Михайлов. – М. Энергоиздат, 1981.– 200 с.
  4. Михайлов, А. К. Лопастные насосы. Теория, расчет и конструирование [Текст] / А. К. Михайлов, В. В. Малюшенко. – М.: Машиностроение, 1977.– 228 с.
  5. Лопастные насосы: Справочник [Текст] / В. А. Зимницкий, А. В. Каплун, А. Н. Папир, В. А. Умов // Под общ. ред. В. А. Зимницкий и В.А. Умова. – Л.: Машиностроение, Ленинградское отд., 1986.– 334 с.
  6. Голованов, Н.Н. Геометрической моделирование [Текст] / Н. Н. Голованов.– М.: Издательство Физико-математической литературы.– 2002.– 472 с.
  7. Chun Du. Constructive Geometric Modelling with Object-Oriented Methodology [Текст] / Chun Du, Manfred Rosendahl // In 4th Eurographics Workshop on Object Oriented Graphics, Sintra, Portugal, 9.– 11.5.94.– http://userpages.uni-koblenz.de/~ros/portugal.htm
  8. John Beltran. Parametric Drawings: Object Relationships with Geometric and Dimensional Constraints [Текст] / John Beltran. – http://aucache.autodesk.com/au2009/sessions/5041/AU09_SpeakerHandout_AU218-1.pdf
  9. Duncan Marsh. Applied Geometry for Computer Graphics and CAD [Текст] / Duncan Marsh // Springer-Verlag London Limited.– 2005.– c. 350.
  10. Agoston, Max K. Computer Graphics and Geometric Modeling: Implementation and Algorithms [Текст] / Max K. Agoston//Springer-Verlag London Limited. – 2005. – c.920.
  11. Antonov A.V. (2004). System analysis. Мoscov: Vysshaya shkola.
  12. Marchenko A.V. (2010). Aspects of the Computer Geometric Modeling of the Guiding Device of Multistage Centrifugal Pump. Geometric and Computer Modeling, 27, 99-103
  13. Malyushenko V.V. (1981). Energetic Pumps: Handbook. Мoscov: Energoizdat.
  14. Mikhajlov A.K. (1977). Vane pumps: Theory, calculation and design. Мoscov: Mashinostoenie.
  15. Zimnitskij V.A., Kaplun A.V., Papir A.N., Umov V.A. (1986). Vane pumps: Handbook. Leningrad: Mashinostoenie.
  16. Golovanov N.N. (2002). Geometric Modeling. Мoscov: Publishing house of physical and mathematical literature.
  17. Chun Du, Manfred Rosendahl. Constructive Geometric Modelling with Object-Oriented Methodology. In 4th Eurographics Workshop on Object Oriented Graphics, Sintra, Portugal, 9.– 11.5.94.– http://userpages.uni-koblenz.de/~ros/portugal.htm
  18. John Beltran. Parametric Drawings: Object Relationships with Geometric and Dimensional Constraints. http://aucache.autodesk.com/au2009/sessions/ 5041/AU09_SpeakerHandout_AU218-1.pdf
  19. Duncan Marsh. (2005). Applied Geometry for Computer Graphics and CAD. Springer-Verlag London Limited.
  20. Max K. Agoston. (2005). Computer Graphics and Geometric Modeling: Implementation and Algorithms. Springer-Verlag London Limited.

Downloads

Published

2013-04-25

How to Cite

Марченко, А. В. (2013). Computer geometric modeling of the guiding device with continuous transfer area. Eastern-European Journal of Enterprise Technologies, 2(7(62), 43–46. https://doi.org/10.15587/1729-4061.2013.12386

Issue

Vol. 2 No. 7(62) (2013): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Анна Вікторівна Марченко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.