Construction of parametric models of belt-drive using АРМ Winmachine

Authors

  • Олег Семенович Кроль Volodymyr Dahl East Ukraine National University Kvartal molodejniy 20a, Lugansk, 91034, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.12391

Keywords:

Mechanisms of parameterization, calculation data forms, window of variables, command window

Abstract

It is appropriate to use the parametrization mechanisms and construct an integrated model on the basis of uniform calculation data form for the whole range of the details, characterized by similar forms and design. Based on this the designing becomes more efficient, as it covers the construction in 2D - drawing and graphics editingprogram and the modeling in 3D - editing program. The promising Russian software product АРМ WinMachine, equipped with parameterization facilities of its own design, interface with two data windows (the window of variables and the command window) is adapted to the instruments of the designer. The article presents the process of the open designing of belt-drives of metal-cutting machine tools on the basis of the designed parametric model. The algorithms of parameterization of V-belt pulleys and V-ribbed transmissions were presented. The comprehensive designing and simulation in ARM Graph and ARM Studio modules were implemented, which significantly reduce the time of the designing of parts and machine components

Author Biography

Олег Семенович Кроль, Volodymyr Dahl East Ukraine National University Kvartal molodejniy 20a, Lugansk, 91034

Professor

Department of processes machining material, tools and instrument

References

  1. Кроль, О.С. Параметрическое моделирование металлорежущих станков и инструментов. Монография [Текст] / О.С. Кроль. – Луганск: изд-во ВНУ им. В. Даля, 2012. – 116 с.
  2. Воробьев, И.И. Передачи с гибкой связью в приводах станков [Текст] / И.И. Воробьев. – М.: Машиностроение, 1971. – 144 с.
  3. Арбузов, А.А. Влияние шага зубьев шкива на распределение нагрузки между зубьями ремня [Текст] / А.А. Арбузов // Станки и инструмент. – 1971. - № 5. –с. 33-34.
  4. Замрий, А.А. Практический учебный курс СAD/CAE APM WinMachine. Учебно-методическое пособие [Текст] / А.А. Замрий. – М: изд-во АПМ, 2007. – 144 с.
  5. Katz, N. Parametric modeling in AutoCAD [Текст] / N. Katz // AECbytes. - 2007. – T. 32. - p. 21-28.
  6. Ushakov, D. Direct modeling – who and why needs it? A review of competitive technologies [Текст] / D. Ushakov // Isicad. - 2011. – № 11. - p. 11-18.
  7. Kuwabara, S. Study on a metal pushing V-belt type CVT: numerical analysis of forces acting on a belt at steady state [Текст] / S. Kuwabara , T. Fujii, S/ Kanehara // JSAE Review. - 1998. – № 2. - p. 117-122.
  8. Kuwabara S. Study on a metal pushing V-belt type CVT: band tension and load distribution forces in steel ringe [Текст] / S. Kuwabara , T. Fujii, S/ Kanehara // JSAE Review. - 1999. – № 1. - p. 55-60.
  9. Ferrando, F. Axial force test and modelling of the V-belt continuously variable transmission of mopeds [Текст] / F. Ferrando , F. Martin, C/ Kiba // JMech.Des. - 1996. – T 118(2). - p. 73-80.
  10. Carbone, G. Theoretical model of metal V-belt drives during rapid ratio changing [Текст] / G. Carbone , L. Mangialardi, G/ Mantriota // JMech.Des. - 1999. – T 123(1). - p. 111-117.
  11. Krol O.S. Parametric modeling металлорежущих tool and instrument. The Monograph [Text] / O.S. Krol. - Lugansk: Volodymyr Dahl EUNU. 2012. - 116 p.
  12. Vorobiev I.I. The transmission with flexible relationship in drive tools / I.I. Vorobiev. - M.: Machine building, 1971. - 144 p.
  13. Arbuzov A.A. The Influence of the step teeth pulley on load sharing between teeth belt / A.A. Arbuzov// Tool and instrument. - 1971. - Issue 5. -p. 33-34.
  14. Zamriy A.A. The Practical educational course CAD/CAE APM WinMachine. Training-methodical appliances / A.A. Zamriy. - M: APM, 2007. - 144 p.
  15. Katz, N. Parametric modeling in AutoCAD [Текст] / N. Katz // AECbytes. - 2007. – T. 32. - p. 21-28.
  16. Ushakov, D. Direct modeling – who and why needs it? A review of competitive technologies [Текст] / D. Ushakov // Isicad. - 2011. – № 11. - p. 11-18.
  17. Kuwabara, S. Study on a metal pushing V-belt type CVT: numerical analysis of forces acting on a belt at steady state [Текст] / S. Kuwabara , T. Fujii, S/ Kanehara // JSAE Review. - 1998. – № 2. - p. 117-122.
  18. Kuwabara S. Study on a metal pushing V-belt type CVT: band tension and load distribution forces in steel ringe [Текст] / S. Kuwabara , T. Fujii, S/ Kanehara // JSAE Review. - 1999. – № 1. - p. 55-60.
  19. Ferrando, F. Axial force test and modelling of the V-belt continuously variable transmission of mopeds [Текст] / F. Ferrando , F. Martin, C/ Kiba // JMech.Des. - 1996. – T 118(2). - p. 73-80.
  20. Carbone, G. Theoretical model of metal V-belt drives during rapid ratio changing [Текст] / G. Carbone , L. Mangialardi, G/ Mantriota // JMech.Des. - 1999. – T 123(1). - p. 111-117.

Downloads

Published

2013-04-25

How to Cite

Кроль, О. С. (2013). Construction of parametric models of belt-drive using АРМ Winmachine. Eastern-European Journal of Enterprise Technologies, 2(7(62), 61–63. https://doi.org/10.15587/1729-4061.2013.12391

Issue

Vol. 2 No. 7(62) (2013): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2014 Олег Семенович Кроль

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.