Determinig the parameters of the acoustic system for the primary treatment of wool
DOI:
https://doi.org/10.15587/1729-4061.2018.133710Keywords:
primary treatment of wool, parameters of acoustic oscillations, coefficient of reflection of acoustic waveAbstract
We have studied the process of primary treatment of wool in order to remove soil and manure contaminants, vegetable impurities, fat, and sweat. The primary treatment of wool performs a key role in retaining the natural properties of wool fiber and makes it possible to obtain high-quality raw materials for textile industry. It was found in the course of research that the intensification of the processes of primary treatment of wool requires the application of acoustic oscillations. Acoustic oscillations act on the system wool‒washing solution. The system wool‒washing solution is in between grating conveyors. Conveyors form a grating of metal rods. To determine parameters of the acoustic system for the primary treatment of wool, we performed an analysis of three problems. The problems related to: the scattering of acoustic oscillations on a metal grating, on a layer of wool-washing solution, and combining the solutions to two problems into one using a scattering matrix method. Our study allowed us to define parameters for the system of primary treatment of wool with acoustic oscillations, which makes it possible to achieve greater effectiveness in cleaning wool compared to existing analogues. It was established in the course of theoretical and experimental studies that the washing of wool should be carried out at the following parameters of acoustic oscillations in a washing solution: frequency of the sound field is 1.1±0.1 kHz; the sound intensity is 1.1±0.01 W/cm2. In this case, the thickness of a layer of wool at the conveyor is 0.06±0.01 m; the motion speed of conveyor is 0.1 m/s; the number of converters per bath is 8±1 pieces.
The application of optimal parameters in process of continuous washing of wool fibers in an aqueous solution makes it possible to obtain the residual fat on wool within 1.5 % of the amount of fat in the unwashed wool while GOST of Ukraine permits up to 2 %.
References
- Rogachev, N., Vasil'eva, L., Timoshenko, N. (2000). Sherst'. Pervichnaya obrabotka i rynok. Moscow: VNIIMP RASKHN, 600.
- Cherenkov, A. D., Kosulina, N. G. (2016). Ploskiy gidrodinamicheskiy izluchatel' v ustroystvah moyki shersti. Enerhetyka ta kompiuterno-intehrovani tekhnolohiyi v APK, 1, 62–66.
- Moroz, O., Cherenkov, A. (2004). Perspektyvy vykorystannia ultrazvukovykh kolyvan dlia pervynnoi obrobky vovny. Visnyk Kharkivskoho derzhavnoho tekhnichnoho universytetu silskoho hospodarstva “Problemy enerhoza-bezpechennia ta enerhozberezhennia v APK Ukrainy”, 27, 255–260.
- Tang, B., Wang, J., Xu, S., Afrin, T., Tao, J., Xu, W. et. al. (2012). Function improvement of wool fabric based on surface assembly of silica and silver nanoparticles. Chemical Engineering Journal, 185-186, 366–373. doi: 10.1016/j.cej.2012.01.082
- Li, Q., Hurren, C. J., Wang, X. (2017). Ultrasonic assisted industrial wool scouring. Procedia Engineering, 200, 39–44. doi: 10.1016/j.proeng.2017.07.007
- Peila, R., Actis Grande, G., Giansetti, M., Rehman, S., Sicardi, S., Rovero, G. (2015). Washing off intensification of cotton and wool fabrics by ultrasounds. Ultrasonics Sonochemistry, 23, 324–332. doi: 10.1016/j.ultsonch.2014.09.004
- Bahtiyari, M. İ., Duran, K. (2013). A study on the usability of ultrasound in scouring of raw wool. Journal of Cleaner Production, 41, 283–290. doi: 10.1016/j.jclepro.2012.09.009
- Ceria, A., Rombaldoni, F., Rovero, G., Mazzuchetti, G., Sicardi, S. (2010). The effect of an innovative atmospheric plasma jet treatment on physical and mechanical properties of wool fabrics. Journal of Materials Processing Technology, 210 (5), 720–726. doi: 10.1016/j.jmatprotec.2009.12.006
- Zhang, R., Wang, A. (2015). Modification of wool by air plasma and enzymes as a cleaner and environmentally friendly process. Journal of Cleaner Production, 87, 961–965. doi: 10.1016/j.jclepro.2014.10.004
- Zhang, Y., Pang, G., Zhao, Y., Wang, X., Bu, F., Zhao, X. (2016). Pulsed electrohydraulic discharge for wool fiber cleaning. Journal of Cleaner Production, 112, 1033–1039. doi: 10.1016/j.jclepro.2015.08.023
- Actis Grande, G., Giansetti, M., Pezzin, A., Rovero, G., Sicardi, S. (2017). Use of the ultrasonic cavitation in wool dyeing process: Effect of the dye-bath temperature. Ultrasonics Sonochemistry, 35, 276–284. doi: 10.1016/j.ultsonch.2016.10.003
- Carran, R. S., Ghosh, A., Dyer, J. M. (2013). The effects of zeolite molecular sieve based surface treatments on the properties of wool fabrics. Applied Surface Science, 287, 467–472. doi: 10.1016/j.apsusc.2013.09.181
- Pan, Y., Hurren, C. J., Li, Q. (2018). Effect of sonochemical scouring on the surface morphologies, mechanical properties, and dyeing abilities of wool fibres. Ultrasonics Sonochemistry, 41, 227–233. doi: 10.1016/j.ultsonch.2017.09.045
- McNeil, S. J., McCall, R. A. (2011). Ultrasound for wool dyeing and finishing. Ultrasonics Sonochemistry, 18 (1), 401–406. doi: 10.1016/j.ultsonch.2010.07.007
- Ferrero, F., Periolatto, M. (2012). Ultrasound for low temperature dyeing of wool with acid dye. Ultrasonics Sonochemistry, 19 (3), 601–606. doi: 10.1016/j.ultsonch.2011.10.006
- Skuchik, E. (1976). Osnovy akustiki. Moscow: Mir, 520.
- Tihonov, A., Samarskiy, A. (1987). Uravneniya matematicheskoy fiziki. Moscow: Nauka, 735.
- Shestopalov, V., Litvinenko, L., Masalov, S. (1973). Difrakciya voln na reshetkah. Kharkiv, 288.
- Vinarskiy, M. S., Lur'e, M. V. (1975). Planirovanie eksperimenta v tekhnologicheskih issledovaniyah. Kyiv: Tekhnikа, 168.
- Spiridonov, A. A. (1981). Planirovanie eksperimenta pri issledovanii tekhnologicheskih processov. Moscow: Mashinostroenie, 184.
- GOST 5778-2000. Sherst' sortirovannaya mytaya. Upakovka, markirovka, transportirovanie i hranenie. Vzamen GOST-5778-73 (1995). Minsk: Mezhgos. sovet po standartiz., metrologii i sertif., 8.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 Lyudmyla Mykhailova, Oleksandr Kozak, Natalia Kosulina, Pavel Potapski, Aleksandr Cherenkov
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.