Development of the technique for improving the structure of a magnetic field in the aperture of a quadrupole electromagnet with a superconducting winding

Authors

DOI:

https://doi.org/10.15587/1729-4061.2018.142163

Keywords:

beam of particles, quadrupole electromagnet, magnetic flux density coefficient, superconducting winding

Abstract

It is of practical interest to construct models for a magnetic field of the quadrupole electromagnet that would make it possible to adjust the medium-integral coefficients of magnetic flux density by changing the geometrical parameters of magnet design. The aim of this work is to develop a method for the optimization of a quadrupole electromagnet's structure with a superconducting winding based on the criterion for a minimum of magnitudes of the non-quadrupole medium-integral coefficients of magnetic flux density in the aperture. Practical application of the technique makes it possible to optimize the design of a quadrupole electromagnet to minimize coefficients of magnetic flux density, medium-integral in length, based on the calculation of geometrical parameters for the yoke and winding. The derived analytical expressions to calculate the minimized magnetic flux density coefficients, medium-integral in length, generated inside the aperture of a quadrupole electromagnet, are based on their proportionality to the contributions from the current winding and the dependence on its position relative to the yoke. The relationships between the coefficients of magnetic flux density, medium-integral in length, and design parameters, established empirically, underlie the procedure for practical application of the technique for improving the uniformity of a gradient of magnetic flux density of a quadrupole electromagnet. The expressions obtained allow the calculation of the required correction of geometrical parameters in the already existing structure in order to optimize magnetic field inside the aperture of quadrupole electromagnets based on the assigned medium-integral coefficients.

The paper reports results of the optimization of design of a magnetoactive part of the triplet of quadrupole electromagnets at an accelerator complex for the project NICA. Optimization was carried out based on the proposed technique with the minimization to a level of 10-5 of the non-quadrupole medium-integral coefficients for the transverse components of magnetic flux density generated in the aperture of an electromagnet with a superconducting winding

Author Biography

Andriy Getman, National Technical University "Kharkiv Polytechnic Institute" Kyrpychova str., 2, Kharkіv, Ukraine, 61002

PhD, Senior Researcher

Department of Theoretical Electrical Engineering

References

  1. Russenschuck, S., Tortschanoff, T. (1994). Mathematical optimization of superconducting accelerator magnets. IEEE Transactions on Magnetics, 30 (5), 3419–3422. doi: https://doi.org/10.1109/20.312673
  2. Russenschuck, S. (2010). Differential Geometry Applied to Coil-End Design. Field Computation for Accelerator Magnets: Analytical and Numerical Methods for Electromagnetic Design and Optimization. Wiley, 609–636. doi: https://doi.org/10.1002/9783527635467.ch19
  3. Russenschuck, S., Auchmann, B., Perez, J. C., Ramos, D., Fessia, P., Karppinen, M. et. al. (2011). Design Challenges for a Wide-Aperture Insertion Quadrupole Magnet. IEEE Transactions on Applied Superconductivity, 21 (3), 1674–1678. doi: https://doi.org/10.1109/tasc.2011.2105453
  4. Fischer, E., Khodzhibagiyan, H. G., Kovalenko, A. D. (2008). Full Size Model Magnets for the FAIR SIS100 Synchrotron. IEEE Transactions on Applied Superconductivity, 18 (2), 260–263. doi: https://doi.org/10.1109/tasc.2008.922261
  5. Kovalenko, A., Agapov, N., Alfeev, A., Bychkov, A., Gromov, A., Khodzhibagiyan, H. et. al. (2008). Full size prototype magnets for heavy ion superconducting synchrotron SIS100 at GSI: status of manufacturing and test at JINR. EPAC’08. Genoa, 2443–2445.
  6. Fischer, E., Schnizer, P., Kurnyshov, R., Schnizer, B., Shcherbakov, P. (2009). Numerical Analysis of the Operation Parameters of Fast Cycling Superconducting Magnets. IEEE Transactions on Applied Superconductivity, 19 (3), 1266–1269. doi: https://doi.org/10.1109/tasc.2009.2018746
  7. Yang, W., Zhang, X., Han, S., Yang, J., Pei, C., Yang, L. et. al. (2014). Magnetic Field Measurement for Synchrotron Dipole Magnets of Heavy-Ion Therapy Facility in Lanzhou. IEEE Transactions on Applied Superconductivity, 24 (3), 1–4. doi: https://doi.org/10.1109/tasc.2013.2289953
  8. Yao, Q. G., Ma, L. Z., Zhang, X. Q., He, Y., Wu, W., Moritz, G. et. al. (2010). Magnetic Field Design of the Dipole for Super-FRS at FAIR. IEEE Transactions on Applied Superconductivity, 20 (3), 172–175. doi: https://doi.org/10.1109/tasc.2009.2038890
  9. Schnizer, P., Schnizer, B., Akishin, P., Fischer, E. (2008). Magnetic Field Analysis for Superferric Accelerator Magnets Using Elliptic Multipoles and Its Advantages. IEEE Transactions on Applied Superconductivity, 18 (2), 1605–1608. doi: https://doi.org/10.1109/tasc.2008.920636
  10. Getman, A. (2018). Cylindrical harmonic analysis of the magnetic field in the aperture of the superconducting winding of an electromagnet. Eastern-European Journal of Enterprise Technologies, 1 (5 (91)), 4–9. doi: https://doi.org/10.15587/1729-4061.2018.123607
  11. Vanderlinde, J. (2004). Classical electromagnetic theory. Springer, 420. doi: https://doi.org/10.1007/1-4020-2700-1
  12. Wolff, S. (1992). Superconducting accelerator magnet design. AIP Conference Proceedings, 249 (2). doi: https://doi.org/10.1063/1.41989

Downloads

Published

2018-09-13

How to Cite

Getman, A. (2018). Development of the technique for improving the structure of a magnetic field in the aperture of a quadrupole electromagnet with a superconducting winding. Eastern-European Journal of Enterprise Technologies, 5(5 (95), 6–12. https://doi.org/10.15587/1729-4061.2018.142163

Issue

Vol. 5 No. 5 (95) (2018): Applied physics

Section

Applied physics

License

Copyright (c) 2018 Andriy Getman

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.