Construction of algorithms to automatically determine individual indicators when assessing the shape quality of cross-wound packages

Authors

DOI:

https://doi.org/10.15587/1729-4061.2019.154923

Keywords:

development of algorithms, an individual indicator, bobbin’s shape, defects in winding, integrated indicator, a weighted average

Abstract

The paper addresses issues related to the selection of individual indicators to estimate the shape quality of cross-wound packages, as well as the construction of algorithms to determine them automatically.

We have developed a method for evaluating the quality of shape of cross-wound packages based on the integrated indicator. To substantiate individual indicators, an expert poll was performed to rank defects in the shape of packages according to the degree of their influence on the suitability of packages for processing at subsequent technological transitions.

To quantify each of the specified defect in the shape of a bobbin, we defined individual indicators that make it possible to quantify their impact. We have developed decisive rules and algorithms to calculate them based on the earlier obtained array of data on the coordinates of points at the bobbin’s surface. We have determined a score-based estimate of the influence of each indicator, which characterizes defects in winding, on the suitability of packages for processing at subsequent technological transitions.

A comprehensive assessment of the package shape could be obtained using a method of weighted index. The mean weighted index is constructed as a dependence whose arguments are the individual quality parameters and their weighted parameters.

Given this, we derived a dependence to calculate the integrated quality indicator of the bobbin’s shape. The higher the value for this indicator, the higher the quality of the controlled package.

We have assessed the applicability of the constructed integrated quality indicator to analyzing the shape of packages. To this end, we analyzed a batch of packages, which confirmed the reproducibility of the process of analysis of the package shape using the proposed integrated indicator; as well as correspondence between estimates, derived using the proposed procedure, and visual assessments.

A method for the integrated quantification of package shape makes it possible to conduct optimization experiments and to assign, based on them, such adjustable parameters for winding mechanisms that would ensure that packages of the required quality are received. The process of designing new winding equipment could be based on the necessary means to regulate a winding process

Author Biographies

Mahammadali Nuriyev, Azerbaijan State University of Economics (UNEC) Istiglaliyyat str., 6, Baku, Azerbaijan, AZ 1001

Doctor of Technical Sciences, Professor

Department of Standardization and Certification

Ganira Jabbarova, Azerbaijan State University of Economics (UNEC) Istiglaliyyat str., 6, Baku, Azerbaijan, AZ 1001

Lecturer

Department of Consumer Goods Expertise

References

  1. Rudovskii, P. N. (1996). The relationship between winding structure, sloughing off and breakages during rewinding. Tekhnologiya Tekstil'noi Promyshlennosti, 6, 40–44.
  2. Rudovskii, P. N. (1995). Effect of the interaction of turns on traversing. Tekhnologiya Tekstil'noi Promyshlennosti, 5, 43–47.
  3. Praček, S., Pušnik, N., Simončič, B., Tavčer Petra, F. (2015). Model for Simulating Yarn Unwinding from Packages. Fibres and Textiles in Eastern Europe, 23 (2 (110)), 25–32. Available at: http://www.fibtex.lodz.pl/article1407.html
  4. Li, L. (2014). Pat. No. 104386539A CN. Control System for Textile Winding Machine Convenient for Loading of Bobbin. IPC: B65H54/547, B65H63/00, B65H67/04. No. 201410607590 CN. declareted: 03.11.2014; published: 04.03.2015.
  5. Nateri, A. S., Ebrahimi, F., Sadeghzade, N. (2014). Evaluation of yarn defects by image processing technique. Optik, 125 (20), 5998–6002. doi: https://doi.org/10.1016/j.ijleo.2014.06.095
  6. Nuriyev, M. N., Seydaliyev, I. M. (2018). Development of methods to control quality of the structure of cross-wound packages. Eastern-European Journal of Enterprise Technologies, 5 (1 (95)), 61–70. doi: https://doi.org/10.15587/1729-4061.2018.143825
  7. Brut-Brulyako, A. B., Rudovskiy, P. N. (2016). Research of winding density cotton yarn in cylinder bobbins for coloration. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti, 1, 75–78.
  8. Nuriyev, M. N., Seydaliyev, I. M., Recebov, I. S., Dadashova, K. S., Musayeva, T. T. (2017). Determining the dependences for calculating a conversion scale of profile height of the controlled packing surface. Eastern-European Journal of Enterprise Technologies, 2 (1 (86)), 58–62. doi: https://doi.org/10.15587/1729-4061.2017.96977
  9. Rudovsky, P. N., Nuriev, M. N., Kiselev, P. N. (2006). Receiving the graphical model of the cross winding bobbins. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti, 3, 124–125.
  10. Rudovskiy, P. N., Nuriev, M. N., Kiselev, P. N. (2006). Development of complex index for estimation of the form of the Cross-Wound Bobbins. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti, 5, 131–133.
  11. Nuriyev, M. N., Seydaliyev, I. M. (2018). Development of methods to control quality of the structure of cross-wound packages. Eastern-European Journal of Enterprise Technologies, 5 (1 (95)), 61–70. doi: https://doi.org/10.15587/1729-4061.2018.143825
  12. Fu, J., Yun, J., Kim, J.-S., Jung, Y. (2015). Real-time graphic visualization of filament band winding for fiber-reinforced cylindrical vessels. Journal of Composite Materials, 50 (16), 2165–2175. doi: https://doi.org/10.1177/0021998315602325
  13. Trisch, R., Gorbenko, E., Dotsenko, N., Kim, N., Kiporenko, G. (2016). Development of qualimetric approaches to the processes of quality management system at enterprises according to international standards of the ISO 9000 series. Eastern-European Journal of Enterprise Technologies, 4 (3 (82)), 18–24. doi: https://doi.org/10.15587/1729-4061.2016.75503
  14. Rudovsky, P. N. (1997). Сontrol of package build in random winding. Melliand Textilberichte, 78 (3), 138–141.
  15. Nuriyev, M., Ali Veliyev, F., İnsaf Hamidov, H., Aqagul Sailov, R., Mahamad Seydaliyev, I., Zargar Jabbarova, G. (2018). Development of a Device for Continuously Monitoring the Parameters of the Winding Structure of Textile Bobbins. Ingeniería Solidaria, 14 (24), 1. doi: https://doi.org/10.16925/.v14i24.2183
  16. Orlov, A. I. (2002). Ekspertnye ocenki. Moscow, 31.
  17. Fomin, V. N. (2005). Kvalimetriya, upravlenie kachestvom, sertifikaciya. Moscow: Associaciya avtorov i izdateley «Tandem»; Izd-vo «Ekmos», 320.
  18. Sevost'yanov, A. G. (1980). Metody i sredstva issledovaniya mekhaniko-tekhnologicheskih processov tekstil'noy promyshlennosti. Moscow: Legkaya industriya, 280.

Downloads

Published

2019-01-22

How to Cite

Nuriyev, M., & Jabbarova, G. (2019). Construction of algorithms to automatically determine individual indicators when assessing the shape quality of cross-wound packages. Eastern-European Journal of Enterprise Technologies, 1(1), 41–49. https://doi.org/10.15587/1729-4061.2019.154923

Issue

Vol. 1 No. 1 (2019): Engineering technological systems

Section

Engineering technological systems

License

Copyright (c) 2019 Mahammadali Nuriyev, Ganira Jabbarova

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.