Movable blade vertical shaft kinetic turbine visual observation
DOI:
https://doi.org/10.15587/1729-4061.2019.163418Keywords:
water energy, potential energy, movable blade, vertical shaft, kinetic turbine, visual observationAbstract
Kinetic energy is the energy produced due to the river water flow speed. This water speed energy can be effectively implemented as a rural power plant. This research has been carried out experimentally and the research is under a laboratory scale research. The turbine tested is a vertical shaft kinetic turbine equipped with eight blades. This study is a continuation of the previous research, which is observed based on the turbine parameters. While in this research the observations are based on a visual test, namely observing the behavior of the water movement and blade movement in the turbine.
The visual test is a test by observing the turbine blade movement and water behavior in the turbine area. From this visual test, it can be seen what is the caused of the low turbine efficiency and what is the causes of the unstable turbine rotation.
From the visualization image observing, it is found that the water does not hit the turbine blade completely. The turbine blade opening time is a little bit too late, so that the water could not fully push the blade surface. At a certain blade position, the water flow is not entering the area between two blades, which results in a weak blade push. This means that there is a turbine torque reduction. From these explanations, it is found that these constraints are the points that result in the unstable turbine rotation. For a better turbine performance, it is suggested to add the turbine blade number. The more the blade number, the smaller the area between the two blades and the more effectively the water flow pushed the turbine blade. The turbine rotation would be more stable and the turbine efficiency would surely be higherReferences
- Boedi, S. D., Soenoko, R., Wahyudi, S., Choiron, M. A. (2015). An Outer Movable Blade Vertical Shaft Kinetic Turbine Performance. International Journal of Applied Engineering Research, 10 (4), 8565–8573.
- Monintja, N. C. V., Soenoko, R., Wahyudi, S., Irawan, Y. S. (2014). The Influence of Flow Steering Angle on the Performance a of Cup-Bladed Kinetic Turbine. International Journal of Applied Engineering Research, 9 (20), 7481–7489.
- Rantererung, C. L., Soeparman, S., Soenoko, R., Wahyudi, S. (2016). Dual nozzle cross flow turbine as an electrical power generation. ARPN Journal of Engineering and Applied Sciences, 11 (1), 15–19.
- Soenoko, R., Rispiningtati, Sutikno, D. (2011). Prototype of a Twin Kinetic Turbine Performance as a Rural Electrical Power Generation. Journal of Basic and Applied Scientific Research, 1 (10), 1686–1690.
- Yang, B., Lawn, C. (2011). Fluid dynamic performance of a vertical axis turbine for tidal currents. Renewable Energy, 36 (12), 3355–3366. doi: https://doi.org/10.1016/j.renene.2011.05.014
- Yang, B., Lawn, C. (2013). Three-dimensional effects on the performance of a vertical axis tidal turbine. Ocean Engineering, 58, 1–10. doi: https://doi.org/10.1016/j.oceaneng.2012.09.020
- Golecha, K., Eldho, T. I., Prabhu, S. V. (2011). Investigation on the Performance of a Modified Savonius Water Turbine with Single and Two deflector Plates. The 11th Asian International Conference on Fluid Machinery and Fluid Power Technology,The 3rd Exhibition. Chennai.
- Lempoy, K. A., Soenoko, R., Wahyudi, S., Choiron, M. A. (2017). Response surface methodology (RSM) application toward the performance of a vertical shaft hinged arc blade kinetic turbine. Journal of Engineering Science and Technology, 12 (8), 2175–2186.
- Williamson, S. J., Stark, B. H., Booker, J. D. (2013). Performance of a low-head pico-hydro Turgo turbine. Applied Energy, 102, 1114–1126. doi: https://doi.org/10.1016/j.apenergy.2012.06.029
- Kailash, G., Eldho, T. I., Prabhu, S. V. (2012). Performance Study of Modified Savonius Water Turbine with Two Deflector Plates. International Journal of Rotating Machinery, 2012, 1–12. doi: https://doi.org/10.1155/2012/679247
- Monintja, N. C. V., Soenok, R., Wahyudi, S., Suryairawan, J. (2014). The Vertical Shaft Kinetic Turbine Optimization using Response Surface Methodology. International Journal of Applied Engineering Research, 9 (21), 8841–8856.
- Fluid Mechanics D203. Available at: http://www.freestudy.co.uk/fluid%20mechanics/saet1a.pdf
- Sliasas, A., Tullis, S. (2010). The dynamic flow behaviour of an oar blade in motion using a hydrodynamics-based shell-velocity-coupled model of a rowing stroke. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology, 224 (1), 9–24. doi: https://doi.org/10.1243/17543371jset57
- Wilkinson, D. (1970). Calculation of Blade-to-Blade Flow in a Turbomachine by Streamline Curvature. Reports and Memoranda No. 3704. Available at: http://naca.central.cranfield.ac.uk/reports/arc/rm/3704.pdf
- Guo, P. C., Wang, Z. N., Luo, X. Q., Wang, Y. L., Zuo, J. L. (2016). Flow characteristics on the blade channel vortex in the Francis turbine. IOP Conference Series: Materials Science and Engineering, 129, 012038. doi: https://doi.org/10.1088/1757-899x/129/1/012038
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 Kennie Abraham Lempoy, Rudy Soenoko, Slamet Wahyudi, Moch Agus Choiron
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
