Influence of high-temperature diffusion annealing on wear resistance of plasma coating ТiC-Ni-Cr

Authors

  • Алексей Леонидович Шевченко Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680, Ukraine
  • Мирослав Васильевич Киндрачук Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680, Ukraine https://orcid.org/0000-0002-0529-2466
  • Александр Васильевич Башта Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680, Ukraine
  • Наталия Владимировна Ищук Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.18105

Keywords:

wear resistance, plasma coating TiC-Ni-Cr, Ti-5Al-5Mo-5V-1Fe-1Cr, tribological properties, diffusion annealing

Abstract

The possibility of improving the quality of plasma coating of TiC-Ni-Cr system, deposited on titanium alloy (α+β), through high-temperature diffusion annealing is considered in the paper. Some results of researches in the field of tribology are given. The main objective of the research is improving physical, mechanical, tribological and technical properties of plasma coating of TiC-Ni-Cr system on titanium alloy Ti-5Al-5Mo-5V-1Fe-1Cr, using high-temperature diffusion annealing. When conducting researches a complex technique was used in the paper, which includes studying the composition, structure and properties of plasma coating and counterbodies using modern physical and chemical methods of analysis, and also determining their tribological properties in conditions of unlubricated sliding friction in the air. The given technology of improving plasma coating quality leads to wear reduction of coating and counterbody, allowing overall control of friction pair properties. The reason for increased wear resistance of plasma coating after high-temperature diffusion annealing is decreased fragility and increased ductility of structural components, as well as increased ability to form tribological structures. The research results can be applied by design engineers when designing various machine parts and mechanisms made of titanium alloys.

Author Biographies

Алексей Леонидович Шевченко, Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680

Engineer

Engineering Department

Мирослав Васильевич Киндрачук, Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680

Professor, Head of Engineering Department,

Engineering Departmen

Александр Васильевич Башта, Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680

PhD of Engineering, Associated professor

Engineering Department

Наталия Владимировна Ищук, Aerospace Institute National Aviation University 1 Kosmonavta Komarova ave., Kyiv, Ukraine, 03680

Postgraduate

Engineering Department

References

  1. Henriques, V. Titanium production for aerospace applications [Текст] / Vinicius A. R. Henriques // Journal of Aerospace Technology and Management. – 2009. – V. 1. – N. 1, P. 7–18.
  2. Boyer, R. The use of β titanium alloys in the aerospace industry [Текст] / R. R. Boyer, R. D. Briggs // Journal of Materials Engineering and Performance. – 2005. – V. 14, I. 6. – P. 681-685.
  3. Application of Titanium and Its Alloys for Automobile Parts [Электронный ресурс] / Nippon Steel. – Режим доступа : www/ URL: http://www.nssmc.com/en/tech/report/nsc/pdf/n8815.pdf – 07.2003 г. – Загл. с экрана.
  4. Froes, F. Titanium in the family automobile: The cost challenge [Текст] / F. H. Froes, H. Friedrich, J. Kiese, D. Bergoint // JOM. – 2004. – V. 56, I. 2. – P. 40-44.
  5. Tucker, R. Thermal Spray Coatings [Текст] / Robert C. Tucker, Jr // ASM Handbook. – V. 5. – P. 497-509.
  6. Swapan, K. Functional Coatings. [Текст] / K. Swapan // Wiley-VCH Verlag GmbH & Co. KGaA, 2006. – 364 c.
  7. The successful use of Plasma Spray Cylinder Coatings in a NASCAR application to achieve friction reduction and cost benefits [Текст] : материалы Engine Expo 2010, 23 июня 2010 г. Штутгарт : Sulzer Metco, 2010. – 29 с.
  8. Киндрачук, М.В. Механизм износа гетерогенных газотермических покрытий на титановом сплаве ВТ-22 [Текст] / М. В. Киндрачук, Э. А. Кульгавый, А. Л. Шевченко // Междунар. науч. журнал «Проблемы трибологии». – 2011. – №1 (59). – С. 80-87.
  9. Войтович, Р. Ф. Высокотемпературное окисление титана и его сплавов [Текст] / Р. Ф. Войтович, Д. И. Головко ; Ин-т проблем материаловедения АН УССР. – К. : Наук. думка, 1984. – 255 с.
  10. Войтович, Р. Ф. Высокотемпературное окисление боридов металлов IV группы: Окисление диборида титана [Текст] / Р. Ф. Войтович, Э. А. Пугач // Порошковая металлургия. – 1975. – № 2. – С. 57-62.
  11. Henriques, V. (2009). Titanium production for aerospace applications. Journal of Aerospace Technology and Management, 1, 7-18.
  12. Boyer, R., Briggs, R. (2005). The use of β titanium alloys in the aerospace industry. Journal of Materials Engineering and Performance, 14, 681-685.
  13. Fujii, H., Takahashi, K., & Yamashita, Y. (2003). Application of Titanium and Its Alloys for Automobile Parts. Nippon Steel Technical Report, 88, 70-75.
  14. Froes, F., Friedrich, H., Kiese, J., & Bergoint, D. (2004). Titanium in the family automobile: The cost challenge. JOM, 56, 40-44.
  15. Tucker, R. (1994). Thermal Spray Coatings. ASM Handbook, 5, 497-509.
  16. Swapan, K. (2006). Functional Coatings. Wiley-VCH Verlag GmbH & Co. KGaA, 364.
  17. Ernst, P., Jenckes, Ch. (2010). The successful use of Plasma Spray Cylinder Coatings in a NASCAR application to achieve friction reduction and cost benefits. Engine Expo 2010, Stuttgart, 29.
  18. Kindrachuk, M., Kulgavii, E., & Shevchenko, A. (2011). Wear mechanism of heterogeneous gas-thermal coatings on titanium alloy VT-22. Problems of Tribology, 1, 80-87.
  19. Voitovich, R., Golovko, D. (1984). High-temperature oxidation of titanium and its alloys. Naukova dumka, 255.
  20. Voitovich, R., Puhach, E. (1975). High-temperature oxidation of metal borides of Group IV: Oxidation of titanium diboride. Powder Metallurgy, 2, 57-62.

Downloads

Published

2013-10-24

How to Cite

Шевченко, А. Л., Киндрачук, М. В., Башта, А. В., & Ищук, Н. В. (2013). Influence of high-temperature diffusion annealing on wear resistance of plasma coating ТiC-Ni-Cr. Eastern-European Journal of Enterprise Technologies, 5(5(65), 15–19. https://doi.org/10.15587/1729-4061.2013.18105

Issue

Vol. 5 No. 5(65) (2013): Applied physics

Section

Applied physics

License

Copyright (c) 2014 Алексей Леонидович Шевченко, Мирослав Васильевич Киндрачук, Александр Васильевич Башта, Наталия Владимировна Ищук

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.