System for activation of metals by cyclic stresses at thermographic inspection
DOI:
https://doi.org/10.15587/1729-4061.2013.18110Keywords:
infrared radiometry, inspection of solids, cyclic stressesAbstract
The active thermographic method of construction materials inspection - thermodynamic thermal imaging inspection, which uses the energy of cyclic stresses for activation of thermal processes on irregularities and defects of solid bodies and their thermal development in the field of infrared radiation, is proposed. The method is based on the features of transformation of elastic waves energy into the heat on defect structures of solids, which are developed in the form of temperature anomalies on the surface and are sufficient to identify them with modern thermal imaging systems. For practical implementation of the method of thermodynamic thermal imaging inspection of materials, a scheme of the system was proposed, which provides the activation of thermal fields in the environment of controlled facility by applying cyclic stresses to it. Thermographic information on the state of facility is registered by technical means of thermal imaging control. The possibility of identifying microstructural irregularities and defects (cracks, flaws, inclusions) in metals under cyclic stresses of samples, with the help of modern thermal imaging means of thermal development control, was experimentally confirmed. Herewith, defects of material microstructure during absorbing the energy of elastic waves created thermal anomalies, the amplitude of which exceeded the background temperature value by 0, 4°C or more.References
- Базалєєв, М. І. Вплив випромінювальної здатності на інформативність поля інфрачервоного випромінювання. [Текст] / М.І.Базалєєв, Б.Б.Бандурян, В.В.Брюховецький, В.Ф.Клепіков, В.В.Литвиненко, Є.М.Прохоренко. // Восточно-европейский журнал передовых технологий. – 2008. - №5/4(35). – С. 32-36.
- Вавилов, В. П. Тепловые методы неразрушающего контроля: Справочник. [Текст] / В.П. Вавилов. – М.: Машиностроение, 1991. – 240с.
- Фокин, В. М. Научно-методологические основы определения теплофизических свойств материалов методом неразрушающего контроля. [Текст] / В.М. Фокин. – М.: Издательство "Машиностроение-1", 2003. – 140с.
- Базалеев, Н. И. Тепловизионная дефектоскопия и диагностика компрессорного оборудования. [Текст] / Н.И.Базалеев, Б.Б.Бандурян, В.Ф.Клепиков, В.В.Литвиненко, Г.В.Кирик, А.Д.Стадник. // Компрессорное и энергетическое машиностроение. – №2(20), июнь 2010. – С.37-43.
- Thomas, R. L. Thermal NDE Techniques – from Photoacoustics to Thermosonics / R. L. Thomas // Review of Progress in Quantitative Nondestructive Evaluation 21, edited by D. O. Thompson and D. E. Chimenti, AIP Conference Proceedings. – 2002. - V. 615, American Institute of Physics, Melville, NY, P. 3-13.
- Wu, D. T. Lock-in thermography for nondestructive evaluation of materials / D. T. Wu and G. Busse. // Revue Generale de Thermique.- 1998.- V.37(8).- P. 693-703.
- Buss, G. Thermal wave imaging with phase sensitive modulated thermpgraphy / G. Buss, D. Wu and W. Karpen // J. Appl. Phys. – 1992. - V. 71(8). - P. 3962-3965
- Morbidini, M. Prediction of the thermosonics signal from fatigue cracks in metals using vibration damping measurements / M. Morbidini, P. Cawley, T. Barden, D. . // J. Appl. Phys. – 1997. - V.83 (4). - P. 2385-2388.
- Maldague, X. Pulsed phase infrared thermography [Текст] / Maldague X., Marinetty S. // J. Appl. Phys. – 1996. - V.79 (5). - P. 2694-2697.
- Han, X. Thermosonics: Detecting cracks and adhesion defects using ultrasonic excitation and infrared imaging [Текст] / X. Han, L.D. Favro, Z. Ouyang, R.L. Thomas // The Journal of Adhesion. – 2001. - V.76(2). – P. 151-162.
- Henneke, E.G. Thermography. An NDI method for damage detection [Текст] / E.G. Henneke, K.L. Reifsnider, W.W. Stinchcomb // Journal of Metals. – 1979. – V.31. - P. 11-15.
- Bazaleev, М. I., Banduryаn, B. B., Bryukhovetskiy, V. V., Klepikov, V. F., Lytvynenko, V. V., Prokhorenkо, E. M. (2008). Influence of a radiate ability is on informing of the field of infrared. Eastern-Europeаn journal of Enterprise Technologies.№5/4(35), 32-36.
- Vavilov, V.P. (1991) Thermal methods of non-destructive testing: A Handbook. - Moscow: Mechanical Engineering, 240.
- Fokin, V. M. (2003). Scientific and methodological basis for determining the thermal properties of materials by non-destructive testing. Moscow: Publishing House "Machine-1", ,-140.
- Bazaleev, М. I., Banduryаn, B. B., Bryukhovetskiy, V. V., Klepikov, V. F., Lytvynenko, V. V. (June 2010). Termovigion fault detection and diagnostics of compressor equipment. Compressor and power engineer. №2(20), 37-43.
- Thomas, R. L. Chimenti D. E. (2002) Thermal NDE Techniques – from Photoacoustics to Thermosonics.Review of Progress in Quantitative Nondestructive Evaluation 21, edited by D. O. Thompson and D. E. Chimenti, AIP Conference Proceedings. – 2002. - V. 615, American Institute of Physics, Melville, NY. 3-13.
- Wu, D., Busse, G. (1998). Lock-in thermography for nondestructive evaluation of materials. Revue Generale de Thermique. V37(8), 693-703.
- Buss, G., Wu, D., Karpen, W. (1992)Thermal wave imaging with phase sensitive modulated thermpgraphy. J. Appl. Phys. V. 71(8). - P. 3962-3965
- Morbidini, M., Cawley, P., Barden, T. (1997). Prediction of the thermosonics signal from fatigue cracks in metals using vibration damping. J. Appl. Phys. V.83 (4), 2385-2388.
- Maldague, X., Marinetty, S. (1996). Pulsed phase infrared thermography. J. Appl. Phys.V.79 (5), 2694-2697.
- Han, X., Favro, L., Ouyang, Z. (2001). Thermosonics: Detecting cracks and adhesion defects using ultrasonic excitation and infrared imaging.The Journal of Adhesion. V.76(2). 151-162.
- Henneke, E.G., Reifsnider, K.L., Stinchcomb, W.W. (1979). Thermography. An NDI method for damage detection. Journal of Metals. V.31. 11-15.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Микола Іванович Базалєєв, Борис Багдасарович Бандурян, Василь Володимирович Брюховецький, В'ячеслав Федорович Клепіков, Володимир Вікторович Литвиненко, Євген Михайлович Прохоренко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.