Processing of measuring results when conducting interlaboratory comparisons on condition of presence of systimatic measurement error
DOI:
https://doi.org/10.15587/1729-4061.2013.18423Keywords:
comparison, interlaboratory comparisons results processing, systematic error, result correctionAbstract
The methods of processing the results of interlaboratory comparisons are described in the paper. The supplementary comparisons for national standards are carried out with the purpose of confirming measurement and calibration capabilities of the corresponding national metrology institutes. The Guideline on COOMET supplementary comparison evaluation does not take into account the presence of systematic error in the results of comparisons. The Guidelines on "Comparisons of groups of instruments for calibration of the same accuracy level" (MI 1832-88) take into account a systematic component of the measurement error, but the results of comparisons are not verified for consistency, which is an objective confirmation of stated uncertainties. Thus, we propose to combine these two methods for objective demonstration of measuring data reliability. To confirm the method selected for processing the comparisons results, an experiment was conducted, comparisons of voltmeters of one accuracy class with higher accuracy class were made. The results of comparisons and their processing by the proposed combined method are given in the paper. Thus, the proposed method allows evaluating the systematic component of uncertainty and its correction, hence, the laboratory comparisons data are recognized as such that confirm given uncertainties.
References
- Bureau International des Poids et Mesures (BIPM) 1999 Mutual recognition of national standards and of calibration and measurement certificates issued by national metrology institutes [Текст]. — BIPM Publication (Sevres:BIPM)
- МИ 1832-88. ГСИ. Сличения групп средств поверки одинакового уровня точности. Основные правила [Текст]. — Введ. 1989-01-07. — М. : Изд-во стандартов, 1989. — 15 с
- ДСТУ ISO/IEC 17025-2006. Національний стандарт України. Загальні вимоги до компетентності калібрувальних та випробувальних лабораторій [Текст]. — Введ. 2007-01-07. — М. : Изд-во стандартов, 2007. — 15 с.
- ГОСТ ИСО/МЭК 43-1-2006. Проверка лаборатории на качество проведения испытаний посредством межлабораторных сличений [Текст]. — Введ. 2007-01-07. — М. : Изд-во стандартов, 2006. — 5 с.
- COOMET R/GM/19:2008. Руководство по оцениванию данных дополнительных сличений КООМЕТ [Текст]. — Утв. КООМЕТ 2008.16.05. — М. : Комитет КООМЕТ, 2008. — 2-4 с.
- Захаров И.П. Теория неопределенности в измерениях. [Текст] :учеб. / Захаров И.П., Кукуш В.Д. – М.: Харьков, Консум, 2002 – 256 с.
- В.Д. Ціделко. Невизначеність вимірювання. Обробка даних і подання результату вимірювання. [Текст] / В.Д. Ціделко, Н.А. Яремчук – Київ: ІВЦ Видавництво «Політехніка», 2002 – 176 с.
- П.І. Неєжмаков. Калібрувальні та вимірювальні можливості національних метрологічних інститутів [Текст] // Український метрологічний журнал. – 2010. – №2. – 48-53 с.
- Н.Ю. Ефремова. Особенности анализа данных межлабораторных сличений, проводимых в аккредитованных калибровочных лабораториях [Текст] / Н.Ю. Ефремова, С.А. Качур. // Системи обробки інформації. – 2006. – Випуск 7(56) – 22-25 с.
- ISO 13528: 2005 Statistical methods for use in proficiency testing by interlaboratory comparisons [Текст]. — Введ. 01.09.2005. — ISO TC 69/SC.
- Шведова В.В. Оцінювання результатів між лабораторних звірень за умов наявності систематичної похибки вимірювання [Текст] Запоріжжя / Шведова В.В., Руденко Н.О. // тез. док. XXI Всеукраинской научно-практической конференции «Инновационный потенциал украинской науки – XXI век», 13-18 травня 2013.
- Bureau International des Poids et Mesures (BIPM) 1999 Mutual recognition of national standards and of calibration and measurement certificates issued by national metrology institutes BIPM Publication (Sevres:BIPM)
- Comparisons of groups calibration means the same level of accuracy. Essential (MI 1832-88).
- ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
- GUIDE 43-1. Proficiency testing by interlaboratorycomparisons.
- COOMET R/GM/19:2008. Guideline on COOMET supplementary comparison evaluation.
- Zakharov I.P., Kukush V.D. Theory of uncertainty in the measurements. Training. guide: - Kharkov, Consum, 2002 - 256 p.
- V.D. Tsidelko, N.A. Yaremchuk. Uncertainty of measurement. Data processing and presentation of measurement results. - Kyiv: PPI Publisher "Polytechnic" 2002 - 176 p.
- PI Neyezhmakov. Calibration and measurement capabilities of National Metrology Institutes // Ukrainian Journal of Metrology. – 2010. – №2. – Р. 48-53.
- N.Y. Yefremova, S.A. Kachur. Features of the data analysis of interlaboratory comparisons carried out by accredited calibration laboratories // Information processing systems. - 2006. - Issue 7 (56). - p. 22-25.
- ISO 13528: 2005 Statistical methods for use in proficiency testing by interlaboratory comparisons.
- Shvedova V.V., Rudenko, N.А. Evaluation of results between laboratory comparisons, under conditions of presence of systematic measurement error // Аbstracts of report to XXI Ukrainian scientific-practical conference "Innovation potential of Ukrainian science - XXI Century", 13-18 May 2013, Zaporozhye.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Вікторія Вікторівна Шведова, Надія Олександрівна Руденко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.