Studying the steady­state vibrations of a two­mass vibratory machine excited by a passive auto­balancer

Authors

DOI:

https://doi.org/10.15587/1729-4061.2020.204882

Keywords:

inertial vibration exciter, two-frequency vibrations, resonance vibratory machine, auto-balancer, two-mass vibratory machine, Sommerfeld effect

Abstract

Analytical-numerical methods have been applied to investigate the steady-state vibrations of a two-mass vibratory machine with rectilinear translational motion of platforms and a vibration exciter in the form of a ball, a roller, or a pendulum auto-balancer. A procedure for studying the modes of load jamming has been devised for the systems similar to the one under consideration. The procedure is based on the idea of parametric solution to the problem of finding the frequencies of load jamming and a bifurcation theory of motion.

It has been established that a two-mass vibratory machine has two resonance frequencies of rotor rotation and two corresponding shapes of platform oscillations. The use of the procedure has shown that for the case of small resistance forces, a vibratory machine:

‒ has five possible modes of load jamming, with the first shape of resonance vibrations of platforms being excited under modes 1 and 2, the second shape ‒ 3 and 4, and, under the mode 5, the frequency of load jamming is close to the frequency of rotor rotation;

‒ demonstrates stable jamming modes under the odd (1, 3, 5) load jamming modes;

‒ shows that the jamming modes 1 and 2 are suitable to excite the resonance oscillations of platforms and for industrial application;

‒ exhibits that increasing the rotor speed monotonously increases the amplitudes of platform oscillations corresponding to a certain jamming mode;

‒ proves that the amplitude of resonance platform oscillations can be controlled by changing the rotor rotation velocity.

The viscous resistance forces acting on a first platform reduce (up to the complete elimination) the first range of rotor speeds, at which the first resonance shape of platform oscillations is excited.

The internal forces of viscous resistance, acting between the platforms, reduce (up to the complete elimination) the second range of rotor speeds, at which the second shape of resonance platform oscillations is excited.

The viscous resistance forces acting on the loads at motion relative to an auto-balancer reduce both ranges

Author Biography

Volodymyr Yatsun, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006

PhD, Associate Professor

Department of Road Cars and Building

References

  1. Gorlach, E. A., Stepanova, N. Yu. (2016). Ispol'zovanie netraditsionnogo rastitel'nogo syr'ya v proizvodstve varenyh kolbas. Izvestiya Sankt-Peterburgskogo gosudarstvennogo agrarnogo universiteta, 36 (77) – 37 (78). Available at: http://ir.nmu.org.ua/handle/123456789/3086
  2. Gursky, V., Kuzio, I., Korendiy, V. (2018). Optimal Synthesis and Implementation of Resonant Vibratory Systems. Universal Journal of Mechanical Engineering, 6 (2), 38–46. doi: https://doi.org/10.13189/ujme.2018.060202
  3. Gursky, V. M., Kuzio, I. V., Lanets, O. S., Kisała, P., Tolegenova, A., Syzdykpayeva, A. (2019). Implementation of dual-frequency resonant vibratory machines with pulsed electromagnetic drive. Przeglad Elektrotechniczny, 4, 43–48. doi: https://doi.org/10.15199/48.2019.04.08
  4. Fedorenko, I. Y., Gnezdilov, A. A. (2016). The dynamic properties of a two-mass vibration technological machine. Vestnik Altayskogo gosudarstvennogo agrarnogo universiteta, 3 (137), 179–183.
  5. Lanets, O. S., Hurskyi, V. M., Lanets, O. V., Shpak, Ya. V. (2014). Obgruntuvannia konstruktsiyi ta modeliuvannia roboty rezonansnoho dvomasovoho vibrostola z inertsiynym pryvodom. Visnyk Natsionalnoho universytetu "Lvivska politekhnika", 788, 28–36. Available at: http://ena.lp.edu.ua:8080/bitstream/ntb/24646/1/6-28-36.pdf
  6. Makarenkov, O. Y. (2013). The asymptotic stability of the oscillations of a two-mass resonance sifter. Journal of Applied Mathematics and Mechanics, 77 (3), 287–295. doi: https://doi.org/10.1016/j.jappmathmech.2013.09.004
  7. Antipov, V. I., Palashova, I. V. (2010). Dynamics of a two-mass parametrically excited vibration machine. Journal of Machinery Manufacture and Reliability, 39 (3), 238–243. doi: https://doi.org/10.3103/s1052618810030052
  8. Zhao, J., Liu, L., Song, M., Zhang, X. (2015). Influencing Factors of Anti-Resonant Inertial Resonant Machine Vibration Isolation System. 2015 3rd International Conference on Computer and Computing Science (COMCOMS). doi: https://doi.org/10.1109/comcoms.2015.22
  9. Xiaohao, L., Tao, S. (2016). Dynamic performance analysis of nonlinear anti-resonance vibrating machine with the fluctuation of material mass. Journal of Vibroengineering, 18 (2), 978–988. Available at: https://www.jvejournals.com/article/16559/pdf
  10. Filimonikhin, G., Yatsun, V. (2015). Method of excitation of dual frequency vibrations by passive autobalancers. Eastern-European Journal of Enterprise Technologies, 4 (7 (76)), 9–14. doi: https://doi.org/10.15587/1729-4061.2015.47116
  11. Sommerfeld, A. (1904). Beitrage zum dinamischen Ausbay der Festigkeislehre. Zeitschriff des Vereins Deutsher Jngeniere, 48 (18), 631–636
  12. Lu, C.-J., Tien, M.-H. (2012). Pure-rotary periodic motions of a planar two-ball auto-balancer system. Mechanical Systems and Signal Processing, 32, 251–268. doi: https://doi.org/10.1016/j.ymssp.2012.06.001
  13. Artyunin, A. I., Eliseyev, S. V. (2013). Effect of “Crawling” and Peculiarities of Motion of a Rotor with Pendular Self-Balancers. Applied Mechanics and Materials, 373-375, 38–42. doi: https://doi.org/10.4028/www.scientific.net/amm.373-375.38
  14. Yaroshevich, N. P., Silivoniuk, A. V. (2013). About some features of run-updynamicof vibration machines with self-synchronizing inertion vibroexciters. Naukovyi visnyk Natsionalnoho hirnychoho universytetu, 4, 70–75. Available at: http://nbuv.gov.ua/UJRN/Nvngu_2013_4_14
  15. Kuzo, I. V., Lanets, O. V., Gurskyi, V. M. (2013). Synthesis of low-frequency resonance vibratory machines with an aeroinertia drive. Naukovyi visnyk Natsionalnoho hirnychoho universytetu, 2, 60–67. Available at: http://nbuv.gov.ua/UJRN/Nvngu_2013_2_11
  16. Artyunin, A. I., Barsukov, S. V., Sumenkov, O. Y. (2019). Peculiarities of Motion of Pendulum on Mechanical System Engine Rotating Shaft. Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019), 649–657. doi: https://doi.org/10.1007/978-3-030-22041-9_70
  17. Yatsun, V., Filimonikhin, G., Dumenko, K., Nevdakha, A. (2017). Equations of motion of vibration machines with a translational motion of platforms and a vibration exciter in the form of a passive auto-balancer. Eastern-European Journal of Enterprise Technologies, 5 (1 (89)), 19–25. doi: https://doi.org/10.15587/1729-4061.2017.111216
  18. Yatsun, V., Filimonikhin, G., Dumenko, K., Nevdakha, A. (2018). Search for the dual­frequency motion modes of a dual­mass vibratory machine with a vibration exciter in the form of passive auto­balancer. Eastern-European Journal of Enterprise Technologies, 1 (7 (91)), 47–54. doi: https://doi.org/10.15587/1729-4061.2018.121737
  19. Yatsun, V., Filimonikhin, G., Podoprygora, N., Pirogov, V. (2019). Studying the excitation of resonance oscillations in a rotor on isotropic supports by a pendulum, a ball, a roller. Eastern-European Journal of Enterprise Technologies, 6 (7 (102)), 32–43. doi: https://doi.org/10.15587/1729-4061.2019.182995
  20. Filimonikhin, G., Yatsun, V., Filimonikhina, I. (2020). Investigation of oscillations of platform on isotropic supports excited by a pendulum. E3S Web of Conferences, 168, 00025. doi: https://doi.org/10.1051/e3sconf/202016800025

Downloads

Published

2020-06-30

How to Cite

Yatsun, V. (2020). Studying the steady­state vibrations of a two­mass vibratory machine excited by a passive auto­balancer. Eastern-European Journal of Enterprise Technologies, 3(7 (105), 79–87. https://doi.org/10.15587/1729-4061.2020.204882

Issue

Vol. 3 No. 7 (105) (2020): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2020 Volodymyr Yatsun

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.