Analysis of dynamic characteristics of the inverter operating on a complex load
DOI:
https://doi.org/10.15587/1729-4061.2020.215145Keywords:
switching power supply, model, frequency characteristics, zero voltage switchingAbstract
A simulation model of a converter with soft switching of transistors has been created. New calculation methods and means of measuring the equivalent frequency characteristics of converting devices with negative feedback to the problems of stability analysis have been applied. A comparative analysis of the calculated frequency characteristics of the converter in the normal operation mode with the characteristics of its linear model is presented. The features of calculating the equivalent frequency characteristics of the loop amplification of key devices are considered. It is noted that it is the equivalent frequency characteristics of the loop amplification that describe the relationship of frequency properties with the dynamics of voltage converters with pulse-width modulation and make it possible to reliably determine the real stability margins, predict the generation modes and open up the possibility of obtaining maximum negative feedback in a given frequency band of key devices. The non-minimal phase properties of the converter significantly complicate the achievement of high-quality stabilization of the output current (stabilization coefficient) of pulse stabilizers using only the deflection control principle. A successful solution to the problem is provided by the use of the principle of combined control. Compensation of the disturbance effect (changes in the supply voltage) gives a much better result than countering it through the feedback loop. It is quite realistic to exclude the influence of the input voltage u(t) on the output current i2 in a static mode (u=const) and in the absence of a negative feedback loop, which provides for u=const in a steady state, and to provide better dynamic properties of the converter. The influence of the nonlinear properties of pulse width modulation on stability is manifested in the considered characteristics in the form of an additional phase shift and resonant bursts in the vicinity of the clock frequency subharmonics. Additional feedbacks introduced into the control loop make it possible to solve synthesis problems using the most simple technical meansReferences
- Milyutin, V. S., Kataev, R. F. (2016). Istochniki pitaniya i oborudovanie dlya elektricheskoy svarki plavleniem. Moscow: Akademiya, 356.
- Vereshchago, E. N. Fel'dsher, I. F., Kostyuchenko, V. I. (2007). Kvazirezonansnye invertory v ustroystvah elektropitaniya dlya vozdushno-plazmennoy rezki. Tekhnichna elektrodynamika, 4, 8–11.
- Vereshchago, E. N., Kvasnitskiy, V. F., Miroshnichenko, L. N., Pentegov, I. V. (2000). Shemotehnika invertornyh istochnikov pitaniya dlya dugovoy nagruzki. Nikolaev: UGMTU, 283.
- Gladkov, E. A., Brodyagin, V. N., Perkovskiy, R. A. (2014). Avtomatizatsiya svarochnyh protsessov. Moscow: Izdatel'stvo MGTU im. N. E. Baumana, 421.
- Wang, R.， Xue, J. (2012). Theoretical analysis for output characteristics of soft-switching arc welding inverter. Transactions of the China Welding Institution, 12 (4), 29–35.
- Dmitrikov, V. F., Shushpanov, D. V. (2018). Ustoychivost' i elektromagnitnaya sovmestimost' ustroystv i sistem elektropitaniya. Moscow: Nauchno-tehnicheskoe izdatel'stvo "Goryachaya liniya-Telekom", 540.
- Nagarajan, C., Madheswaran, M. (2011). Performance analysis of LCL-T resonant converter with fuzzy/PID controller using state space analysis. Electrical Engineering, 93 (3), 167–178. doi: https://doi.org/10.1007/s00202-011-0203-9
- De Simone, S. (2014). LLC Resonant Half-Bridge Converter Design Guideline. Application Note AN2450.
- Ridley, R. B. (2012). Power Supply Design, Volume 1: Control. Ridley Engineering, Inc., 168.
- Verna, S., Singh, S. K., Rao, A. G. (2013). Overview of control techniques for DC-DC converters. Research Journal of Engineering Sciences, 2 (8), 18–21.
- Smirnov, V. S. (2007). Ekvivalentnye chastotnye harakteristiki tranzistornyh klyuchevyh ustroystv s otritsatel'noy obratnoy svyaz'yu (matematicheskoe modelirovanie, metodika izmereniy i optimizatsii). Sankt-Peterburg: SPbGUT, 17.
- Belov, G. A. (2016). Comparison of the Discrete Dynamic Models of Impulse Converters. Elektrichestvo, 11, 35–43.
- Aleksandrov, A. G. (2010). Chastotnaya teoriya avtomaticheskogo upravleniya (chastotnoe upravlenie). Kn. 1. Moscow: EPI MISiS, 320.
- Shushpanov, D. V. (2005). Vysokoeffektivnye impul'snye preobrazovateli napryazheniya s ShIM i raspredelennye sistemy elektropitaniya na ih osnove. Sankt-Peterburg: SPbGUT, 17.
- Sidorets, V. N., Pentegov, I. V. (2013). Determinirovanniy haos v nelineynyh tsepyah s elektricheskoy dugoy. Kyiv: Mezhdunarodnaya assotsiatsiya «Svarka», 272.
- Vereshchago, E. N., Kostyuchenko, V. I. (2014). A simulation model of electric arc. Russian Electrical Engineering, 85 (6), 376–381. doi: https://doi.org/10.3103/s106837121406011x
- Korshunov, A. I. (2013). Povyshenie kachestva stabilizatsii vyhodnogo napryazheniya impul'snogo preobrazovatelya postoyannogo toka. Izvestiya vysshih uchebnyh zavedeniy. Priborostroenie, 56 (3), 48–57.
- Samylin, I. N., Smirnov, V. S., Filin, V. A. (2004). Otsenka predel'noy glubiny otritsatel'noy obratnoy svyazi v ShIM-preobrazovatelyah ponizhayushchego tipa. Prakticheskaya silovaya elektronika, 14, 12–18.
- Bakalov, V. P., Dmitrikov, V. F., Kruk, B. I. (2013). Osnovy teorii tsepey. Moscow: Goryachaya liniya - Telekom, 597.
- Vereschago, E. N., Kostyuchenko, V. I. (2019). Research of static and dynamic characteristics of a voltage converter with soft switching running on arc load. Electrical Engineering and Power Engineering, 2, 8–22. doi: https://doi.org/10.15588/1607-6761-2019-2-1
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2020 Eugen Vereschago, Vitalii Kostiuchenko, Sergii Novogretskyi
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
