Software and information support of diagnosis during maintenance of radio electronic means

Authors

DOI:

https://doi.org/10.15587/1729-4061.2014.22400

Keywords:

life cycle, maintenance, technical condition, diagnosis, sensitivity function

Abstract

Despite the widespread use of automation means during design of radio electronic means (REM), little attention is still paid to automation means during maintenance of REM. The ways to automate the processes of monitoring and diagnosing the technical condition of REM during maintenance are proposed in the paper. In the process of diagnosing, it is necessary to solve the problem, opposite to the design problem, i.e. to determine the values of REM internal parameters by the values of output characteristics. It is possible to do at the presence of an effective and scalable computer-aided design (CAD) system, as well as a clear methodology for selecting informative test input actions and controlled output characteristics of RES. Thus, the success of the subsequent diagnosis and maintenance as a whole, is laid during the REM design, when it is necessary to have as much accurate mathematical models of the elements that make up the REM as possible, and ensure the REM diagnosability by determining what test actions to feed and what output characteristics to measure. The diagnosis problem is proposed to solve by the parametric optimization method based on the root-mean-square criterion using functions of REM output characteristics sensitivity to change in the values of its internal parameters. Building network systems, based on already used CAD systems, with an open distributed architecture would allow to solve the design and maintenance problems more efficiently in terms of both replenishing the element model libraries, and reducing the computation time.

Author Biographies

Константин Николаевич Касьян, Zaporizhzhya National Technical University Zhukovskiy str. 64, Zaporizhzhya, Ukraine, 69063

Ph.D., Associate Professor

Department of Computer Systems and Networks

Николай Николаевич Касьян, Zaporizhzhya National Technical University Zhukovskiy str. 64, Zaporizhzhya, Ukraine, 69063

Ph.D., Dean of the Faculty of Computer Science and Technology

Department of Computer Systems and Networks

References

  1. Норенков, И. П. Информационная поддержка наукоемких изделий. CALS-технологии [Текст] / И. П. Норенков, П. К. Кузьмик. – М.: Изд-во МГТУ им. Н.Э. Баумана, 2002. – 320 с.
  2. Fitzpatrick, D. Analog Design and Simulation using OrCAD Capture and PSpice [Text] / D. Fitzpatrick. – Newnes, 2012. – 344 р.
  3. Attia, J. O. SPICE and MATLAB for Electronics: An Integrated Approach, Second Edition [Text] / J. O. Attia. – CRC Press, 2010. – 356 р.
  4. Кеоун, Дж. OrCAD PSpice. Анализ электрических цепей [Текст]: пер. с англ. / Дж. Кеоун. – М.: ДМК Пресс; СПб.: Питер, 2008. – 640 с.
  5. Сабунин, А. Е. Altium Designer. Новые решения в проектировании электронных устройств [Текст] / А. Е. Сабунин. – М.: Солон-Пресс, 2009. – 432 c.
  6. Wang, L. Electronic Design Automation: Synthesis, Verification, and Test [Text] / L. Wang, Y. Chang, K. Cheng. – Morgan Kaufmann, 2009. – 971 р.
  7. Maheswari, L. K. Analog electronics [Text] / L. K. Maheswari, M. M. S. Anand. – PHI Learning Pvt. Ltd, 2009. – 704 р.
  8. Sedra, A. S. Microelectronic Circuits (Oxford Series in Electrical and Computer Engineering) (6th Edition) [Text] / A. S. Sedra, K. C. Smith. – Oxford University Press, 2010. – 1456 р.
  9. Wilson, P. Model-Based Engineering for Complex Electronic Systems [Текст] / P. Wilson. – Elsevier Science, 2013. – 536 р.
  10. Palade, V. Computational Intelligence in Fault Diagnosis [Text] / V. Palade, C. D. Bocaniala, L. Jain. – Springer, 2006. – 362 р.
  11. Blanke, M. Diagnosis and Fault-Tolerant Control [Text] / M. Blanke, M. Kinnaert, J. Lunze. – Springer, 2006. – 691 р.
  12. Witczak, M. Modelling and Estimation Strategies for Fault Diagnosis of Non-Linear Systems [Text] / M. Witczak // From Analytical to Soft Computing Approaches. – Springer, 2007. – 223 р.
  13. Ding, S. X. Model-based Fault Diagnosis Techniques [Text] / S. X. Ding. – Springer, 2008. – 493 р.
  14. Halderman, J. D. Diagnosis and Troubleshooting of Automotive Electrical, Electronic, and Computer Systems (6th Edition) [Text] / J. D. Halderman. – Pearson Education, Inc, 2012. – 528 р.
  15. Mazur, G. A. Troubleshooting Electrical [Текст] / G. A. Mazur, T. E. Proctor // Electronic Systems. – ATP, 2010. – 592 р.
  16. Kasyan, K. Diagnosing of the radio-electronic equipment with the help of traditional systems of the automated designing [Text] / K. Kasyan, N. Kasyan. – International conference TCSET’, 2006. – Р. 33–35.
  17. Касьян, К. Н. Разработка метода диагностирования электрорадиоэлементов аналоговых функциональных узлов на этапе производства [Текст]: автореф. дис. … канд. тех. наук: 05.12.17 / К.Н. Касьян // Московский государственный ин-т электроники и математики (технический ун-т). – М., 1998. – 21 с.
  18. Банди, Б. Методы оптимизации: Вводный курс [Текст]: пер. с англ. [Текст] / Б. Банди. – М.: Радио и связь, 1988. – 128 с.
  19. Назаров, А. В. Нейросетевые алгоритмы прогнозирования и оптимизации систем [Текст] / А. В. Назаров, А. И. Лоскутов. – М.: Наука и техника, 2003. – 384 с.
  20. Петров, Д. В. Мережева система теплового проектування МЕП, багатоваріантних стосовно конструктивно-технологічного виконання [Текст]: автореф. дис. … канд. тех. наук: 05.13.12 / Д.В. Петров // Національний ун-т ”Львівська політехніка”. – Львів, 2002. – 20 с.
  21. Анисимов, Д. А. Исследование и разработка методов построения распределенных систем автоматизированного проектирования на основе технологий веб-сервисов [Текст]: автореф. дис. … канд. тех. наук: 05.13.12 / Д. А. Анисимов // Санкт-Петербургский государственный электротехнический ун-т „ЛЭТИ”. – Санкт-Петербург, 2013. – 18 с.
  22. Norenkov, I. P., Kuzmik, P. K. (2002). Information support of high technology products. CALS-technologies. Moscow: Publisher MSTU N.E. Bauman, 320.
  23. Fitzpatrick, D. (2012). Analog Design and Simulation using OrCAD Capture and PSpice. Newnes, 344.
  24. Attia, J. O. (2010). SPICE and MATLAB for Electronics: An Integrated Approach, Second. CRC Press, 356.
  25. Keoun, J. (2008). OrCAD PSpice. Analysis of electric circuits. Moscow: DMK Press; St. Petersburg: Piter, 640.
  26. Sabunin, A. E. (2009). Altium Designer. New solutions in the design of electronic devices. Moscow:Solon-Press, 432.
  27. Wang, L., Chang, Y., Cheng, K. (2009). Electronic Design Automation: Synthesis, Verification, and Test. Morgan Kaufmann, 971.
  28. Maheswari, L. K., Anand, M. M. S. (2009). Analog electronics. PHI Learning Pvt. Ltd., 704.
  29. Sedra, A. S., Smith, K. C. (2010). Microelectronic Circuits (Oxford Series in Electrical and Computer Engineering) (6th Edition). Oxford University Press, 1456.
  30. Wilson, P. (2013). Model-Based Engineering for Complex Electronic Systems. Elsevier Science, 536.
  31. Palade, V., Bocaniala, C. D., Jain, L. (2006). Computational Intelligence in Fault Diagnosis. Springer, 362.
  32. Blanke, M., Kinnaert, M., Lunze, M. J. (2006). Diagnosis and Fault-Tolerant Control. Springer, 691.
  33. Witczak, M. (2007). Modelling and Estimation Strategies for Fault Diagnosis of Non-Linear Systems. From Analytical to Soft Computing Approaches. Springer, 223.
  34. Ding, S. X. (2008). Model-based Fault Diagnosis. Springer, 493.
  35. Halderman, J. D. (2012). Diagnosis and Troubleshooting of Automotive Electrical, Electronic, and Computer Systems (6th Edition). Pearson Education, Inc, 528.
  36. Mazur, G. A., Proctor, T. E. (2010). Troubleshooting Electrical. Electronic Systems. ATP, 592.
  37. Kasyan, K., Kasyan, N. (2006). Diagnosing of the radio-electronic equipment with the help of traditional systems of the automated designing. International conference TCSET’2006, 33–35.
  38. Kasian, K. N. (1998). Development of a method of diagnosing electroradioelements analog functional units at the production stage. Publisher Moscow State Institute of Electronics and Mathematics (Technical University), 21.
  39. Bunday, B. D. (1988). Basic Optimization Methods. Moscow: Radio and Communication, 128.
  40. Nazarov, A. V., Loskutov, A. I. (2003). Neuronetwork algorithms of forecasting and optimization. Moscow: Science and technology, 384.
  41. Petrov, D. V. (2002). Network system thermal design of microelectronic devices, multivariate relative constructively technological performance. Lviv: Publisher National Univ. “Lviv Polytechnic”, 20.
  42. Anisimov, D. A. (2013). Research and development of methods for constructing distributed CAD systems based on web services technology. St. Petersburg: Publisher St. Petersburg State Electrotechnical University “LETI”, 18.

Downloads

Published

2014-04-14

How to Cite

Касьян, К. Н., & Касьян, Н. Н. (2014). Software and information support of diagnosis during maintenance of radio electronic means. Eastern-European Journal of Enterprise Technologies, 2(2(68), 29–33. https://doi.org/10.15587/1729-4061.2014.22400

Issue

Vol. 2 No. 2(68) (2014): Information technology. Industry control systems

Section

Information technology

License

Copyright (c) 2014 Константин Николаевич Касьян, Николай Николаевич Касьян

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.