Regularities in the washing out of water-soluble phosphorus-ammonium salts from the fire-protective coatings of timber through a polyurethane shell
DOI:
https://doi.org/10.15587/1729-4061.2021.229458Keywords:
protective equipment, weight loss, treatment of timber surface, washing out a fire retardant, polymer shellAbstract
The analysis of fire-protective materials for wooden building structures was carried out and the need to develop reliable methods for studying the process of washing out fire retardants from the surface of the building structure, which is necessary for the creation of new types of fire-protective materials, was established. That is why there arises a need to determine the conditions for the formation of a barrier for washing out and to establish a mechanism for inhibition of moisture transmission to the material. In this regard, a mathematical model was built of washing out fire retardants using a polymeric shell made of organic material as a coating, which makes it possible to estimate the effectiveness of a polymer shell by the amount of the washed-out fire retardant. According to the experimental data and theoretical dependences, the dynamics of the release of fire retardants from the fire-protective layer of the coating was calculated; it did not exceed 1.0 %, and therefore, ensures fire protection of timber. The results of determining the weight loss of the sample under the influence of water indicate the ambiguous impact of the nature of protection on the washout. In particular, this implies the availability of data sufficient for performing a high-quality process of moisture diffusion inhibition and, based on it, detection of the moment, from which a decrease in efficiency of a coating begins. The experimental studies proved that a sample of fire-protected timber after exposure to water for 30 days withstood the influence of a heat flow. In particular, the loss of timber weight after the temperature exposure was less than 6 %, and the temperature of flue gases did not exceed 185 °C. Thus, there is a reason to assert the possibility of directed control of the processes of fire protection of timber through the use of polymer coatings capable of forming a protective layer on the surface of fire-protected material, which inhibits the rate of washing out the fire retardants
References
- Krüger, S., Gluth, G. J. G., Watolla, M.-B., Morys, M., Häßler, D., Schartel, B. (2016). Neue Wege: Reaktive Brandschutzbeschichtungen für Extrembedingungen. Bautechnik, 93 (8), 531–542. doi: https://doi.org/10.1002/bate.201600032
- Zhou, Z., Du, C., Yu, H., Yao, X., Huang, Q. (2020). Promotion effect of nano-SiO2 on hygroscopicity, leaching resistance and thermal stability of bamboo strips treated by nitrogen-phosphorus-boron fire retardants. Wood Research, 65 (5), 693–704. doi: https://doi.org/10.37763/wr.1336-4561/65.5.693704
- Lin, C.-F., Karlsson, O., Mantanis, G. I., Sandberg, D. (2019). Fire performance and leach resistance of pine wood impregnated with guanyl-urea phosphate/boric acid and a melamine-formaldehyde resin. European Journal of Wood and Wood Products, 78 (1), 107–111. doi: https://doi.org/10.1007/s00107-019-01483-y
- Nakamura, M., Kanematsu, M., Nishio, Y., Yoshioka, H., Hagihara, S., Sugita, T. et. al. (2019). Evaluation of durability of reaction-to-fire performance of fire-retardant treated wooden facades by accelerated weathering test. AIJ Journal of Technology and Design, 25 (60), 709–714. doi: https://doi.org/10.3130/aijt.25.709
- Chu, D., Mu, J., Zhang, L., Li, Y. (2017). Promotion effect of NP fire retardant pre-treatment on heat-treated poplar wood. Part 2: hygroscopicity, leaching resistance, and thermal stability. Holzforschung, 71 (3), 217–223. doi: https://doi.org/10.1515/hf-2016-0213
- Donmez Cavdar, A., Mengeloğlu, F., Karakus, K. (2015). Effect of boric acid and borax on mechanical, fire and thermal properties of wood flour filled high density polyethylene composites. Measurement, 60, 6–12. doi: https://doi.org/10.1016/j.measurement.2014.09.078
- Son, D. W., Kang, M. R., Hwang, W. J., Lee, H. M., Park, S. B. (2014). Hygroscopic Property, Leaching Resistance and Metal Corrosive Efficacy of Wood Treated with Fire Retardants. Journal of the Korean Wood Science and Technology, 42 (2), 157–162. doi: https://doi.org/10.5658/wood.2014.42.2.157
- Zhao, P., Guo, C., Li, L. (2018). Flame retardancy and thermal degradation properties of polypropylene/wood flour composite modified with aluminum hypophosphite/melamine cyanurate. Journal of Thermal Analysis and Calorimetry, 135 (6), 3085–3093. doi: https://doi.org/10.1007/s10973-018-7544-9
- Md Nasir, K., Ramli Sulong, N. H., Johan, M. R., Afifi, A. M. (2018). An investigation into waterborne intumescent coating with different fillers for steel application. Pigment & Resin Technology, 47 (2), 142–153. doi: https://doi.org/10.1108/prt-09-2016-0089
- Kovalnogov, V. N., Karpukhina, T. V., Korotkov, E. A. (2016). Mathematic modeling of the kinetics of heat-and-humidity state of capillary-porous bodies under convection drying. AIP Conference Proceedings, 1738. doi: https://doi.org/10.1063/1.4952241
- Tsapko, Y., Tsapko, А. (2017). Establishment of the mechanism and fireproof efficiency of wood treated with an impregnating solution and coatings. Eastern-European Journal of Enterprise Technologies, 3 (10 (87)), 50–55. doi: https://doi.org/10.15587/1729-4061.2017.102393
- Tsapko, Y., Tsapko, A., Bondarenko, O. P. (2020). Research of Conditions of Removal of Fire Protection from Building Construction. Key Engineering Materials, 864, 141–148. doi: https://doi.org/10.4028/www.scientific.net/kem.864.141
- Tsapko, Y., Lomaha, V., Bondarenko, O. P., Sukhanevych, M. (2020). Research of Mechanism of Fire Protection with Wood Lacquer. Materials Science Forum, 1006, 32–40. doi: https://doi.org/10.4028/www.scientific.net/msf.1006.32
- Patnaik, P. (2004). Dean's Analytical Chemistry Handbook. McGraw-Hill Professional, 1280.
- Potter, M. C. (2019). Engineering analysis. Springer. doi: https://doi.org/10.1007/978-3-319-91683-5
- Frank-Kamenetskiy, D. A. (1987). Diffuziya i teploperedacha v himicheskoy kinetike. Moscow: Nauka, 502.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Юрій Володимирович Цапко, Роман Дмитрович Василишин, Олександр Миколайович Мельник, Василь Васильович Ломага, Олексій Юрійович Цапко, Ольга Петрівна Бондаренко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
