Determination of the effect of exposure conducted in KOH solutions at different temperatures on the properties of electrochromic Ni(OH)2-PVA films
DOI:
https://doi.org/10.15587/1729-4061.2021.239151Keywords:
electrochromism, electrodeposition, nickel hydroxide, temperature, potassium hydroxide, recrystallization, aging, degradationAbstract
To determine the effect of exposure of film composite electrodes based on Ni(OH)2-polyvinyl alcohol to an alkaline solution at high temperatures on the electrochromic and electrochemical characteristics, a series of films was obtained. The films were obtained on a glass substrate coated with fluorine-doped tin oxide. The coating of the substrates was carried out by the cathodic template method under the same conditions. The resulting precipitates were treated by keeping them in an alkali solution at different temperatures: 30, 40, 50, 60, and 70 °C for 8 hours, thereby simulating the operating conditions of an electrochromic device in a hot climate.
It was found that the exposure temperature directly affected the electrochemical and electrochromic properties of the treated films. In this case, the cyclic volt-ampere curves showed a decrease in the peak values of the current densities and a lower rate of establishment of characteristics with an increase in the treatment temperature. At a maximum treatment temperature of 70 °C, the properties of the film significantly changed towards deterioration.
According to the results of the experiments, three temperature ranges of treatment were identified. The first one was in the range up to 40 °C, in which the films showed significant electrochromic and electrochemical activity after treatment. The second interval was between 40 and 60 °C, in which the coatings showed a reversible deterioration in electrochromic and electrochemical activity. After treatment in the second interval, the films gradually restored their performance during electrochemical cycling. The third interval was from 70 °C and above. The films treated in this temperature range irreversibly lost their electrochemical and electrochromic activity.
The study also proposed mechanisms to explain changes in the characteristics of electrodes during treatment, as well as possible ways to combat temperature degradation.
References
- McGlade, C., Ekins, P. (2015). The geographical distribution of fossil fuels unused when limiting global warming to 2 °C. Nature, 517 (7533), 187–190. doi: https://doi.org/10.1038/nature14016
- Cannavale, A., Ayr, U., Fiorito, F., Martellotta, F. (2020). Smart Electrochromic Windows to Enhance Building Energy Efficiency and Visual Comfort. Energies, 13 (6), 1449. doi: https://doi.org/10.3390/en13061449
- Smart Windows: Energy Efficiency with a View. Available at: https://www.nrel.gov/news/features/2010/1555.html
- Liu, S., Zhang, D., Peng, H., Jiang, Y., Gao, X., Zhou, G. et. al. (2021). High-efficient smart windows enabled by self-forming fractal networks and electrophoresis of core-shell TiO2@SiO2 particles. Energy and Buildings, 232, 110657. doi: https://doi.org/10.1016/j.enbuild.2020.110657
- Shin, Y., Wang, Q., Qin, G., Yang, D.-K. (2020). P‐82: Color Flexible Waveguide Display using Polymer Stabilized Liquid Crystal. SID Symposium Digest of Technical Papers, 51 (1), 1664–1667. doi: https://doi.org/10.1002/sdtp.14215
- Purushothaman, K. K., Muralidharan, G., Vijayakumar, S. (2021). Sol-Gel coated WO3 thin films based complementary electrochromic smart windows. Materials Letters, 296, 129881. doi: https://doi.org/10.1016/j.matlet.2021.129881
- Park, S.-I., Quan, Y.-J., Kim, S.-H., Kim, H., Kim, S., Chun, D.-M. et. al. (2016). A review on fabrication processes for electrochromic devices. International Journal of Precision Engineering and Manufacturing-Green Technology, 3 (4), 397–421. doi: https://doi.org/10.1007/s40684-016-0049-8
- Kotok, V. A., Kovalenko, V. L., Kovalenko, P. V., Solovov, V. A., Deabate, S., Mehdi, A. et. al. (2017). Advanced electrochromic Ni(OH)2/PVA films formed by electrochemical template synthesis. ARPN Journal of Engineering and Applied Sciences, 12 (13), 3962–3977. Available at: http://www.arpnjournals.org/jeas/research_papers/rp_2017/jeas_0717_6156.pdf
- Kotok, V. A., Malyshev, V. V., Solovov, V. A., Kovalenko, V. L. (2017). Soft Electrochemical Etching of FTO-Coated Glass for Use in Ni(OH)2-Based Electrochromic Devices. ECS Journal of Solid State Science and Technology, 6 (12), P772–P777. doi: https://doi.org/10.1149/2.0071712jss
- Kotok, V., Kovalenko, V. (2021). A study of the possibility of conducting selective laser processing of thin composite electrochromic Ni(OH)2-PVA films. Eastern-European Journal of Enterprise Technologies, 1 (12 (109)), 6–15. doi: https://doi.org/10.15587/1729-4061.2021.225355
- Lampert, C. M., Agrawal, A., Baertlien, C., Nagai, J. (1999). Durability evaluation of electrochromic devices – an industry perspective. Solar Energy Materials and Solar Cells, 56 (3-4), 449–463. doi: https://doi.org/10.1016/s0927-0248(98)00185-8
- Matthews, J. P., Bell, J. M., Skryabin, I. L. (1999). Effect of temperature on electrochromic device switching voltages. Electrochimica Acta, 44 (18), 3245–3250. doi: https://doi.org/10.1016/s0013-4686(99)00043-2
- Kotok, V., Kovalenko, V., Anataichuk, I., Mochalov, A., Makarchenko, N., Nafeev, R., Verbitskiy, V. (2020). Effect of variable temperature loads on characteristics of electrochrome composite Ni (OH)2-PVA films. Eastern-European Journal of Enterprise Technologies, 6 (5 (108)), 6–14. doi: https://doi.org/10.15587/1729-4061.2020.220302
- Kotok, V., Kovalenko, V. (2020). A study of the increased temperature influence on the electrochromic and electrochemical characteristics of Ni(OH)2-PVA composite films. Eastern-European Journal of Enterprise Technologies, 3 (6 (105)), 6–12. doi: https://doi.org/10.15587/1729-4061.2020.205352
- Purushothaman, K. K., Muralidharan, G. (2009). The effect of annealing temperature on the electrochromic properties of nanostructured NiO films. Solar Energy Materials and Solar Cells, 93 (8), 1195–1201. doi: https://doi.org/10.1016/j.solmat.2008.12.029
- Da Rocha, M., He, Y., Diao, X., Rougier, A. (2018). Influence of cycling temperature on the electrochromic properties of WO3//NiO devices built with various thicknesses. Solar Energy Materials and Solar Cells, 177, 57–65. doi: https://doi.org/10.1016/j.solmat.2017.05.070
- Kovalenko, V. L., Kotok, V. A., Sykchin, A. A., Mudryi, I. A., Ananchenko, B. A., Burkov, A. A. et. al. (2016). Nickel hydroxide obtained by high-temperature two-step synthesis as an effective material for supercapacitor applications. Journal of Solid State Electrochemistry, 21 (3), 683–691. doi: https://doi.org/10.1007/s10008-016-3405-2
- He, X., Ren, J., Li, W., Jiang, C., Wan, C. (2006). Ca3(PO4)2 coating of spherical Ni(OH)2 cathode materials for Ni–MH batteries at elevated temperature. Electrochimica Acta, 51 (21), 4533–4536. doi: https://doi.org/10.1016/j.electacta.2006.01.009
- Kotok, V., Kovalenko, V. (2018). Definition of the aging process parameters for nickel hydroxide in the alkaline medium. Eastern-European Journal of Enterprise Technologies, 2 (12 (92)), 54–60. doi: https://doi.org/10.15587/1729-4061.2018.127764
- Bernard, M. C., Cortes, R., Keddam, M., Takenouti, H., Bernard, P., Senyarich, S. (1996). Structural defects and electrochemical reactivity of β-Ni(OH)2. Journal of Power Sources, 63 (2), 247–254. doi: https://doi.org/10.1016/s0378-7753(96)02482-2
- Tessier, C., Haumesser, P., Bernard, P., Delmas, C. (1999). The Structure of Ni(OH)2: From the Ideal Material to the Electrochemically Active One. Journal of The Electrochemical Society, 146 (6), 2059–2067.
- Ash, B., Nalajala, V. S., Popuri, A. K., Subbaiah, T., Minakshi, M. (2020). Perspectives on Nickel Hydroxide Electrodes Suitable for Rechargeable Batteries: Electrolytic vs. Chemical Synthesis Routes. Nanomaterials, 10 (9), 1878. doi: https://doi.org/10.3390/nano10091878
- Hall, D. S., Lockwood, D. J., Bock, C., MacDougall, B. R. (2015). Nickel hydroxides and related materials: a review of their structures, synthesis and properties. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 471 (2174), 20140792. doi: https://doi.org/10.1098/rspa.2014.0792
- Jayashree, R. S., Kamath, P. V. (1999). Factors governing the electrochemical synthesis of α-nickel (II) hydroxide. Journal of Applied Electrochemistry, 29, 449–454. doi: https://doi.org/10.1023/A:1003493711239
- Kovalenko, V. L., Kotok, V. A., Sykchin, A., Ananchenko, B. A., Chernyad’ev, A. V., Burkov, A. A. et. al. (2020). Al3+ Additive in the Nickel Hydroxide Obtained by High-Temperature Two-Step Synthesis: Activator or Poisoner for Chemical Power Source Application? Journal of The Electrochemical Society, 167 (10), 100530. doi: https://doi.org/10.1149/1945-7111/ab9a2a
- Tan, Y., Srinivasan, S., Choi, K.-S. (2005). Electrochemical Deposition of Mesoporous Nickel Hydroxide Films from Dilute Surfactant Solutions. Journal of the American Chemical Society, 127 (10), 3596–3604. doi: https://doi.org/10.1021/ja0434329
- Lorenzen, A. L., Rossi, T. S., Vidotti, M. (2016). Synthesis of Ni(OH)2 in micellar environment: structural, spectroscopic, and electrochemical studies. Journal of Solid State Electrochemistry, 20 (9), 2525–2531. doi: https://doi.org/10.1007/s10008-015-3115-1
- Cheng, X., Zhang, D., Liu, X., Cao, D., Wang, G. (2014). Influence of CTAB on morphology, structure, and supercapacitance of β-Ni(OH)2. Ionics, 21 (2), 533–540. doi: https://doi.org/10.1007/s11581-014-1205-1
- Kolesnikov, A. V., Kuznetsov, V. V., Kolesnikov, V. A., Kapustin, Y. I. (2015). The role of surfactants in the electroflotation extraction of copper, nickel, and zinc hydroxides and phosphates. Theoretical Foundations of Chemical Engineering, 49 (1), 1–9. doi: https://doi.org/10.1134/s0040579515010042
- Lominoga, E. A., Burmistrov, K. S., Gevod, V. S. (2014). Synthesis and properties of synthanol ALM-10 acylated by phthalic anhydride. Voprosy himii i himicheskoy tekhnologii, 3, 52–55.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Valerii Kotok, Vadym Kovalenko, Rovil Nafeev, Volodymyr Verbitskiy, Elena Lominoga, Olena Melnyk, Sergey Vlasov, Iryna Plaksiienko, Larisa Kolesnikova, Volodymyr Kalinichenko
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.