Establishing the influence of technical and technological parameters of milking equipment on the efficiency of machine milking
DOI:
https://doi.org/10.15587/1729-4061.2022.251172Keywords:
milking equipment, milking machine, teat rubber, vacuum system, milk yield rateAbstract
One of the tasks that imply increasing the milk productivity of cows is to create optimal maintenance conditions that ensure the increased use of the genetic potential of cattle based on the implementation of engineering and technological solutions.
A mathematical model has been built that links the technical and technological parameters of the vacuum system of milking equipment, namely, the value of the working vacuum P, the pulsation frequency n, the ratio of pulsation cycles, and the tension strength of milking rubber FH to cows’ milk yield rate V. The range of milking plant operating parameters for milking in the milk line has been determined, at which the milk yield rate is maximum: P=52 kPa, n=57.6–58.8 min–1, δ=0.59–0.64, FH=59.3–60.4 H. Under these parameters, the milk yield rate is V=1.48–1.53 l/min.
The results of the multifactor experiment have helped construct an adequate mathematical model of the second order, which confirms the theoretical dependence of the influence of the technical and technological parameters of the vacuum system of milking equipment on milk yield rate and the air flow of the milking machine. Analysis of the mathematical model has made it possible to establish the rational structural and technological parameters for the vacuum system of a milking machine: the value of the working vacuum, P=50.6 kPa; pulsation frequency, n=55.9 min–1, the ratio of pulsation cycles and the tension force of milking rubber FH=64.8 H. Under these parameters, the milk yield rate is maximum: V=1.47–1.52 l/min; the air flow consumption of the milking machine is Q=2.19 m3/h.
The mathematical model built fully reveals the influence of technical and technological parameters of milking equipment on the efficiency of machine milking. Owing to this, the issue related to the rational choice of equipment is resolved.
References
- Kurak, A. S. (2011). Tandem “tekhnyka-korova” – vazhnoe zveno v tekhnolohiy mashynnoho doenyia. Nashe selskoe khoziaistvo, 8, 59–61.
- Ferneborg, S., Stadtmüller, L., Pickova, J., Wiking, L., Svennersten-Sjaunja, K. (2016). Effects of automatic cluster removal and feeding during milking on milking efficiency, milk yield and milk fat quality. Journal of Dairy Research, 83 (2), 180–187. doi: https://doi.org/10.1017/s0022029916000170
- Pezzuolo, A., Cillis, D., Marinello, F., Sartori, L. (2017). Estimating efficiency in automatic milking systems. Contents of Proceedings of 16th International Scientific Conference Engineering for Rural Development, 736–741. doi: https://doi.org/10.22616/erdev2017.16.n148
- Odorčić, M., Rasmussen, M. D., Paulrud, C. O., Bruckmaier, R. M. (2019). Review: Milking machine settings, teat condition and milking efficiency in dairy cows. Animal, 13, s94–s99. doi: https://doi.org/10.1017/s1751731119000417
- Palii, А. P., Handola, Yu. M., Shevchenko, I. O., Stotskyi, A. O., Stotskyi, O. G., Sereda, A. I. et. al. (2020). Assessment of cow lactation and milk parameters when applying various milking equipment. Ukrainian Journal of Ecology, 10 (4), 195–201. Available at: https://www.ujecology.com/articles/assessment-of-cow-lactation-and-milk-parameters-when-applying-various-milking-equipment.pdf
- Dmytriv, V., Dmytriv, I., Lavryk, Y., Horodeckyy, I. (2018). Models of adaptation of the milking machines systems. BIO Web of Conferences, 10, 02004. doi: https://doi.org/10.1051/bioconf/20181002004
- Tremblay, M., Hess, J. P., Christenson, B. M., McIntyre, K. K., Smink, B., van der Kamp, A. J. et. al. (2016). Factors associated with increased milk production for automatic milking systems. Journal of Dairy Science, 99 (5), 3824–3837. doi: https://doi.org/10.3168/jds.2015-10152
- Paliy, A. P., Ishchenko, K. V., Palii, A. P. (2021). Effect of various milking equipment on milk ejection in high-yielding cows. Ukrainian Journal of Ecology, 11 (1), 18–24. doi: https://doi.org/10.15421/2020_303
- Gaworski, M., Kamińska, N., Kic, P. (2017). Evaluation and optimization of milking in some Polish dairy farms differed in milking parlours. Agronomy Research, 15 (1), 112–122. Available at: https://www.researchgate.net/publication/317746017_Evaluation_and_optimization_of_milking_in_some_polish_dairy_farms_differed_in_milking_parlours
- Fahim, A., Kamboj, M., Sirohi, A., Bhakat, M., Prasad, S., Gupta, R. (2018). Milking machine induced teat reactions in crossbred cows milked in automated herringbone milking parlour. Indian Journal of Animal Science, 88 (12), 1412–1415.
- Grinchenko, V. A., Laguta, I. I. (2014). Problemy mashinnogo doeniya i puti ikh resheniya. Novye zadachi tekhnicheskikh nauk i puti ikh resheniya. Ufa: Aeterna, 17–18.
- Lutsenko, M., Zvoleiko, D. (2012). Doslidzhennia protsesu doinnia koriv u spetsializovanykh doilnykh zalakh. Tekhnika i tekhnolohiyi APK, 9 (36), 31–34.
- Dmytriv, V. T. (2006). Alhorytmizatsiya protsesu mashynnoho doinnia koriv. Pratsi Tavriyskoi derzhavnoi ahrotekhnichnoi akademiyi, 40, 36–41.
- Grigor'ev, D. A., Sosin, I. P. (2013). Osobennosti sovremennykh doil'nykh mashin. Sovremennye tekhnologii sel'skokhozyaystvennogo proizvodstva. Veterinariya. Zootekhniya: sbornik nauchnykh statey po materialam XVII mezhdunarodnoy nauchno-prakticheskoy konferentsii. Grodno, 341–343.
- Golisz, E., Kupczyk, A., Majkowska, M., & Trajer, J. (2021). Simulation Tests of a Cow Milking Machine – Analysis of Design Parameters. Processes, 9 (8), 1358. doi: https://doi.org/10.3390/pr9081358
- Radu, R., Ioan, T., Petru, C. (2017). Assessment of the milking machine parameters using a computer driven test system. Journal of Agricultural Informatics, 8 (1), 32–44. doi: https://doi.org/10.17700/jai.2017.8.1.321
- Paliy, A., Nanka, A., Marchenko, M., Bredykhin, V., Paliy, A., Negreba, J. et. al. (2020). Establishing changes in the technical parameters of nipple rubber for milking machines and their impact on operational characteristics. Eastern-European Journal of Enterprise Technologies, 2 (1 (104)), 78–87. doi: https://doi.org/10.15587/1729-4061.2020.200635
- Achkevych, V. I., Khmelevsky, V. S., Achkevych, O. M. (2020). The influence of the design parameters of the milking machine collector on the oscillation of the vacuum pressure in the suction phase. Mechanization and electrification of agriculture, 11 (110), 117–123. doi: https://doi.org/10.37204/0131-2189-2020-11-13
- Dmytriv, V. T. (2006). Model vytraty povitria elementamy doilnoho aparata. Visnyk Lvivskoho derzhavnoho ahrarnoho universytetu: Ahroinzhenerni doslidzhennia, 10, 483–488.
- Enokidani, M., Kawai, K., Shinozuka, Y., Watanabe, A. (2016). Milking performance evaluation and factors affecting milking claw vacuum levels with flow simulator. Animal Science Journal, 88 (8), 1134–1140. doi: https://doi.org/10.1111/asj.12741
- Adamchuk, V. V., Dmytriv, I. V. (2018). Funktsionalna realizatsiya adaptyvnoho doilnoho aparata. Materialy VI-yi Naukovo-tekhnichnoi konferentsiyi «Tekhnichnyi prohres u tvarynnytstvi ta kormovyrobnytstvi». Hlevakha, 6–8.
- Zabolotko, O. O., Darchyk, P. D. (2013). Analiz parametriv vyvedennia moloka doilnymy aparatamy. Pratsi Tavriyskoho derzhavnoho ahrotekhnolohichnoho universytetu, 13 (1), 45–49.
- Palii, A. P. (2019). Annotation research of work pulsator milking apparatus and influence of their working parameters on the indicators of milk removal in cows. Zbirnyk naukovykh prats: Ahrarna nauka ta kharchovi tekhnolohiyi, 3 (106), 83–90. Available at: http://nbuv.gov.ua/UJRN/anxt_2019_3_10
- Paliy, A., Aliiev, E., Nanka, A., Bogomolov, O., Bredixin, V., Paliy, A. et. al. (2021). Identifying changes in the technical parameters of milking rubber under industrial conditions to elucidate their effect on the milking process. Eastern-European Journal of Enterprise Technologies, 3 (1 (111)), 21–29. doi: https://doi.org/10.15587/1729-4061.2021.231917
- Demba, S., Ammon, C., Rose-Meierhöfer, S. (2018). The influence of different milking settings on the measured teat load caused by a collapsing liner. Computers and Electronics in Agriculture, 153, 54–61. doi: https://doi.org/10.1016/j.compag.2018.08.011
- Paliy, A., Naumenko, A., Paliy, A., Zolotaryova, S., Zolotarev, A., Tarasenko, L. et. al. (2020). Identifying changes in the milking rubber of milking machines during testing and under industrial conditions. Eastern-European Journal of Enterprise Technologies, 5 (1 (107)), 127–137. doi: https://doi.org/10.15587/1729-4061.2020.212772
- Borodin, S. A., Andrianov, E. A., Andrianov, A. A., Tertychnaya, T. N. (2020). Sub stantiating Design Parameters of a multi functional milking machine. Journal of mechanics of continua and mathematical sciences, 8, 176–190. doi: https://doi.org/10.26782/jmcms.spl.8/2020.04.00014
- Palii, А. P., Mihalchenko, S. A., Chechui, H. F., Reshetnichenko, A. P., Rozum, Y. E., Bredykhin, V. V. et. al. (2020). Milking and udder health assessment in industrial farming. Ukrainian Journal of Ecology, 10 (2), 375–381. Available at: https://www.ujecology.com/articles/milking-and-udder-health-assessment-in-industrial-farming.pdf
- Bykovskaya, N. V. (2015). Innovatsii v molochnom skotovodstve. Innovatsii, 4, 215–217.
- Paliy, A., Aliiev, E., Paliy, A., Ishchenko, K., Shkromada, O., Musiienko, Y. et. al. (2021). Development of a device for cleansing cow udder teats and testing it under industrial conditions. Eastern-European Journal of Enterprise Technologies, 1 (1 (109)), 43–53. doi: https://doi.org/10.15587/1729-4061.2021.224927
- Krasovskiy, G. I., Filaretov, G. F. (1982). Planirovanie eksperimenta. Minsk: Izd-vo BGU, 302.
- Hnasevych, N. V., Honcharuk, T. V., Huryk, M. I. et. al.; Honcharuk, T. V. (Ed.) (2014). Osnovy naukovykh doslidzhen. Ternopil, 272.
- Kopylova, I. B. (2017). Metody obrabotki eksperimental'nykh dannyakh. Blagoveschensk: Izd-vo AmGU, 48.
- Uzhik, V. F., Shakhov, V. A., Teteryadchenko, A. I., Nekipelov, S. I., Kitaeva, O. V., Kabashko, A. A. (2017). K obosnovaniyu konstruktivno-rezhimnykh parametrov pnevmoregulyatora vakuummetricheskogo davleniya adaptivnogo doil'nogo apparata. Izvestiya Orenburgskogo agrarnogo universiteta, 3 (65), 101–105.
- Uzhik, V. F., Klesov, D. N., Kitaeva, O. V. (2018). K izmeneniyu konstruktivno-rezhimnykh parametrov pul'satora doil'nogo apparata. Nauchnaya zhizn', 12, 37–44.
- Dmytriv, I., Krasnytsia, B. (2017). Analysis of methods and means for evaluating the parameters of modern milking systems. Visnyk LNAU: Ahrarni doslidzhennia, 21, 134–140.
- Aliev, E. B. (2012). Doslidzhennia metrolohichnykh kharakterystyk komplektu ustatkuvannia kontroliu vakuummetrychnykh parametriv molochno-doilnoho obladnannia. Materialy mizhnar. nauk.-prakt. konf.: Ahrarna nauka ta praktyka na suchasnomu etapi rozvytku: dosvid, problemy ta shliakhy yikh vyrishennia. Lviv, 13–15.
- Nørstebø, H., Dalen, G., Rachah, A., Heringstad, B., Whist, A. C., Nødtvedt, A., Reksen, O. (2019). Factors associated with milking-to-milking variability in somatic cell counts from healthy cows in an automatic milking system. Preventive Veterinary Medicine, 172, 104786. doi: https://doi.org/10.1016/j.prevetmed.2019.104786
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Elchyn Aliiev, Andriy Paliy, Viktor Kis, Anatoliy Paliy, Roman Petrov, Larysa Plyuta, Oleksandr Chekan, Oleksii Musiienko, Vitalii Ukhovskyi, Leonid Korniienko
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.