Balance of theoretical electrotechnics

Authors

  • Павел Федорович Лебедев Кафедра автоматизации производственных процессов Харьковский государственный технический университет строительства и архитектуры, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2010.2593

Keywords:

balance, perfect bridge, «star», «polygon», determinant

Abstract

New information is resulted about the balance structures. Determination is given concepts «Balance», simple and perfect bridge. Pictures are entered of bridges on voltage, on current, on voltage and current.

Author Biography

Павел Федорович Лебедев, Кафедра автоматизации производственных процессов Харьковский государственный технический университет строительства и архитектуры

Кандидат технических наук, доцент

References

  1. Передельский Г. И. Мостовые цепи с импульсным питанием. – М.: Энергоатомиздат, 1988. 192 с.: ил.
  2. Электротехнический справочник: В 3 т. Т. 1. Общие вопросы. Электротехнические материалы// Под общ. Ред. профессоров МЭИ В.Г.Герасимова и др. – 7 – е изд., испр. и доп. – М.: Энергоатомиздат, 1985. – 488 с.: ил.
  3. Фазовый контур первого порядка /Лебедев П.Ф., Пономаренко С.Н. //Радиотехника: Всеукр. Межвед. Науч.-техн. Сб. 2007. Вып. 150 с. 88–93.
  4. Лебедєв П. Ф., Донець О. В., Пономаренко С. М. Патент України на фазообертач мостовий № 83519, зареєстровано 25.07.2008 р., бюл. №14. Заявка № а 2006 06841 від 19.06.2006 р.
  5. Лебедев П.Ф. Эквивалентные структуры линейных электрических цепей //Радиотехника: Всеукр. Межвед. Науч.-техн. Сб. 2003. Вып. 135 с. 158–165.
  6. Лебедев П.Ф. Эквивалентные структуры в гармоническом анализе. //Радиотехника: Всеукр. Межвед. Науч.-техн. Сб. 2004. Вып. 139 с. 107–112.
  7. Самодуальные линейные структуры радиотехники и связи /П.Ф.Лебедев //Радиотехника: Всеукр. Межвед. Науч.-техн. Сб. 2009. Вып. 140 с. 121–126.

Downloads

Published

2010-01-29

How to Cite

Лебедев, П. Ф. (2010). Balance of theoretical electrotechnics. Eastern-European Journal of Enterprise Technologies, 1(6(43), 38–43. https://doi.org/10.15587/1729-4061.2010.2593

Issue

Vol. 1 No. 6(43) (2010): The applied physics and materials technology

Section

Energy-saving technologies and equipment

License

Copyright (c) 2014 Павел Федорович Лебедев

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.