Dual fuzzy logic PID controller based regulating of dc motor speed control with optimization using Harmony Search algorithm
DOI:
https://doi.org/10.15587/1729-4061.2023.282830Keywords:
PID controller, dc motor, dual fuzzy logic controller, sliding mode control, optimizationAbstract
This paper discusses the implementation of a Proportional-Integral-Derivative (PID) controller for regulating the speed of a closed loop four quadrant chopper fed DC motor. The PID controller is combined with a Dual Fuzzy Logic Controller to form a DFPID controller for enhancing the performance of speed control of the DC motor. The DFLC is optimized using a metaheuristic algorithm known as Harmony Search Algorithm (HSA). The major aim of this research is to gain an effective control over the speed of the motor in the closed loop environment. For achieving this, the parameters for the DFPID are selected through time domain analysis which aims to satisfy the requisites such as settling time and peak overshoot. Initially, the fuzzy logic controller in the DFPID controls the coefficients of the PID achievement gain an effective control over the system error and rate of error change. Further, the DFPID is improved by the HAS for obtaining a precise correction. The solutions obtained by tuning the DFPID controller are evaluated from simulation analysis conducted on a MATLAB/SIMULINK platform. The closed loop performance is analyzed in both time and frequency domain analysis and the performance of DFPID is optimized using the HSA algorithm to obtain precise value of the control process. As observed from the Simulation analysis, the DFPID-HSA generates optimized control signals to the DC motor for controlling the speed. The performance of the intended speed control approach is analyzed in terms of different evaluation metrics such as motor speed, torque and armature current. Experimental outcomes show that the proposed approach achieves better control performance and faster speed of DC motor compared to conventional PID controllers and SMC controllers
References
- Barinov, I. A., Melnichenko, O. V. (2019). Power IGBTs Application in AC-Wire DC-Motor Locomotive Thyristor-Based Power Circuit for Regenerative Brake Energy Efficiency Increase. 2019 International Conference on Industrial Engineering, Applications and Manufacturing (ICIEAM). doi: https://doi.org/10.1109/icieam.2019.8742933
- Malafeev, S. I., Zakharov, A. V., Safronenkov, Yu. A. (2019). A New Series of Asynchronous Frequency-Controlled Motors for Mining Excavators. Russian Electrical Engineering, 90 (4), 299–303. doi: https://doi.org/10.3103/s1068371219040060
- Das, D., Kumaresan, N., Nayanar, V., Navin Sam, K., Ammasai Gounden, N. (2016). Development of BLDC Motor-Based Elevator System Suitable for DC Microgrid. IEEE/ASME Transactions on Mechatronics, 21 (3), 1552–1560. doi: https://doi.org/10.1109/tmech.2015.2506818
- Tamir, T. S., Xiong, G., Shen, Z., Gong, X., Liu, S., Lodhi, E. et al. (2020). Comparative Study of Four Speed Controllers of Brushless DC Motors for Industrial Applications. IFAC-PapersOnLine, 53 (5), 59–64. doi: https://doi.org/10.1016/j.ifacol.2021.04.124
- Lee, S., Baek, S.-W. (2019). A study on the improvement of the cam phase control performance of an electric continuous variable valve timing system using a cycloid reducer and BLDC motor. Microsystem Technologies, 26 (1), 59–70. doi: https://doi.org/10.1007/s00542-019-04411-5
- Guerra, R. H., Quiza, R., Villalonga, A., Arenas, J., Castano, F. (2019). Digital Twin-Based Optimization for Ultraprecision Motion Systems With Backlash and Friction. IEEE Access, 7, 93462–93472. doi: https://doi.org/10.1109/access.2019.2928141
- Barkas, D. A., Ioannidis, G. C., Psomopoulos, C. S., Kaminaris, S. D., Vokas, G. A. (2020). Brushed DC Motor Drives for Industrial and Automobile Applications with Emphasis on Control Techniques: A Comprehensive Review. Electronics, 9 (6), 887. doi: https://doi.org/10.3390/electronics9060887
- Khanam, I., Parmar, G. (2017). Application of SFS algorithm in control of DC motor and comparative analysis. 2017 4th IEEE Uttar Pradesh Section International Conference on Electrical, Computer and Electronics (UPCON). doi: https://doi.org/10.1109/upcon.2017.8251057
- Joseph Godfrey, A., Sankaranarayanan, V. (2018). A new electric braking system with energy regeneration for a BLDC motor driven electric vehicle. Engineering Science and Technology, an International Journal, 21 (4), 704–713. doi: https://doi.org/10.1016/j.jestch.2018.05.003
- Feng, J., Liu, K., Wang, Q. (2018). Scheme based on buck‐converter with three‐phase H‐bridge combinations for high‐speed BLDC motors in aerospace applications. IET Electric Power Applications, 12 (3), 405–414. doi: https://doi.org/10.1049/iet-epa.2017.0615
- Rakhonde, S., Kulkarni, V. (2018). Sliding Mode Controller (SMC) Governed Speed Control of DC Motor. 2018 3rd IEEE International Conference on Recent Trends in Electronics, Information & Communication Technology (RTEICT). doi: https://doi.org/10.1109/rteict42901.2018.9012572
- Singh, S., Kosti, A. (2015). Comparative study of integer order PI-PD controller and fractional order PI-PD controller of a DC motor for speed and position control. International Journal of Electrical and Electronic Engineering & Telecommunications, 4 (2), 22–26. Available at: http://www.ijeetc.com/uploadfile/2017/0731/20170731062931686.pdf
- Yadav, V., Tayal, V. K. (2018). Optimal Controller Design for a DC Motor using PID Tuner. 2018 International Conference on Power Energy, Environment and Intelligent Control (PEEIC). doi: https://doi.org/10.1109/peeic.2018.8665658
- Tang, W.-J., Liu, Z.-T., Wang, Q. (2017). DC motor speed control based on system identification and PID auto tuning. 2017 36th Chinese Control Conference (CCC). doi: https://doi.org/10.23919/chicc.2017.8028376
- Nishat, M. M., Faisal, F., Rahman, M., Hoque, M. A. (2019). Modeling and Design of a Fuzzy Logic Based PID Controller for DC Motor Speed Control in Different Loading Condition for Enhanced Performance. 2019 1st International Conference on Advances in Science, Engineering and Robotics Technology (ICASERT). doi: https://doi.org/10.1109/icasert.2019.8934559
- Mohamadwasel, N. B., Bayat, O. (2019). Improve DC motor system using fuzzy logic control by particle swarm optimization in use scale factors. Int. J. Comput. Sci. Mob. Comput, 8 (3), 152–160. Available at: https://ijcsmc.com/docs/papers/March2019/V8I3201926.pdf
- Islam, M. T., Karim, S. R., Sutradhar, A., Miah, S. (2020). Fuzzy Logic and PID Controllers for DC Motor Using Genetic Algorithm. International Journal of Control, 10 (2), 37–41. Available at: http://article.sapub.org/10.5923.j.control.20201002.03.html
- Singh, R., Kumar, A., Sharma, R. (2016). Fractional Order PID Control using Ant Colony Optimization. 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES). doi: https://doi.org/10.1109/icpeices.2016.7853387
- A Mohammed Eltoum, M., Hussein, A., Abido, M. A. (2021). Hybrid Fuzzy Fractional-Order PID-Based Speed Control for Brushless DC Motor. Arabian Journal for Science and Engineering, 46 (10), 9423–9435. doi: https://doi.org/10.1007/s13369-020-05262-3
- Gobinath, S., Madheswaran, M. (2019). Deep perceptron neural network with fuzzy PID controller for speed control and stability analysis of BLDC motor. Soft Computing, 24 (13), 10161–10180. doi: https://doi.org/10.1007/s00500-019-04532-z
- Mu, S., Shibata, S., Yamamoto, T., Nakashima, S., Tanaka, K. (2019). Speed Control of Ultrasonic Motor using a Variable Gain Type PID Control Based on Neural Networks. Proceedings of The 7th International Conference on Intelligent Systems and Image Processing 2019. doi: https://doi.org/10.12792/icisip2019.020
- Dat, N. T., Kien, C. V., Anh, H. P. H. (2021). Optimal FOC-PID Parameters of BLDC Motor System Control Using Parallel PM-PSO Optimization Technique. International Journal of Computational Intelligence Systems, 14 (1), 1142. doi: https://doi.org/10.2991/ijcis.d.210319.001
- Xie, W., Wang, J.-S., Wang, H.-B. (2019). PI Controller of Speed Regulation of Brushless DC Motor Based on Particle Swarm Optimization Algorithm with Improved Inertia Weights. Mathematical Problems in Engineering, 2019, 1–12. doi: https://doi.org/10.1155/2019/2671792
- Kumarasamy, V., Ramasamy, V. K., Chinnaraj, G. (2021). Systematic design of multi-objective enhanced genetic algorithm optimized fractional order PID controller for sensorless brushless DC motor drive. Circuit World, 48 (4), 479–492. doi: https://doi.org/10.1108/cw-07-2020-0137
- Shill, P. C., Akhand, M. A. H., Asaduzzaman, MD., Murase, K. (2015). Optimization of Fuzzy Logic Controllers with Rule Base Size Reduction using Genetic Algorithms. International Journal of Information Technology & Decision Making, 14 (05), 1063–1092. doi: https://doi.org/10.1142/s0219622015500273
- He, M., Zhang, T., Huang, J., Luo, C. (2020). Speed Control Study of Brushless DC motor Based on Fuzzy Optimization PID. IOP Conference Series: Materials Science and Engineering, 768 (4), 042013. doi: https://doi.org/10.1088/1757-899x/768/4/042013
- Yin, H., Yi, W., Wang, K., Guan, J., Wu, J. (2020). Research on brushless DC motor control system based on fuzzy parameter adaptive PI algorithm. AIP Advances, 10 (10). doi: https://doi.org/10.1063/5.0025000
- Premkumar, K., Manikandan, B. V. (2015). Fuzzy PID supervised online ANFIS based speed controller for brushless dc motor. Neurocomputing, 157, 76–90. doi: https://doi.org/10.1016/j.neucom.2015.01.032
- Lotfy, A., Kaveh, M., Mosavi, M. R., Rahmati, A. R. (2020). An enhanced fuzzy controller based on improved genetic algorithm for speed control of DC motors. Analog Integrated Circuits and Signal Processing, 105 (2), 141–155. doi: https://doi.org/10.1007/s10470-020-01599-9
- Qi, Z., Shi, Q., Zhang, H. (2020). Tuning of Digital PID Controllers Using Particle Swarm Optimization Algorithm for a CAN-Based DC Motor Subject to Stochastic Delays. IEEE Transactions on Industrial Electronics, 67 (7), 5637–5646. doi: https://doi.org/10.1109/tie.2019.2934030
- Premkumar, K., Manikandan, B. V. (2016). Bat algorithm optimized fuzzy PD based speed controller for brushless direct current motor. Engineering Science and Technology, an International Journal, 19 (2), 818–840. doi: https://doi.org/10.1016/j.jestch.2015.11.004
- Hu, H., Wang, T., Zhao, S., Wang, C. (2019). Speed control of brushless direct current motor using a genetic algorithm–optimized fuzzy proportional integral differential controller. Advances in Mechanical Engineering, 11 (11), 168781401989019. doi: https://doi.org/10.1177/1687814019890199
- Li, H.-C., Zhou, K.-Q., Mo, L.-P., Zain, A. M., Qin, F. (2020). Weighted Fuzzy Production Rule Extraction Using Modified Harmony Search Algorithm and BP Neural Network Framework. IEEE Access, 8, 186620–186637. doi: https://doi.org/10.1109/access.2020.3029966
- Fu, L., Zhu, H., Zhang, C., Ouyang, H., Li, S. (2021). Hybrid Harmony Search Differential Evolution Algorithm. IEEE Access, 9, 21532–21555. doi: https://doi.org/10.1109/access.2021.3055530
- Goel, N., Chacko, S., Patel, R. N. (2020). PI Controller Tuning Based on Stochastic Optimization Technique for Performance Enhancement of DTC Induction Motor Drives. Journal of The Institution of Engineers (India): Series B, 101 (6), 699–706. doi: https://doi.org/10.1007/s40031-020-00496-z
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Salam Ibrahim Khather, Muhammed Abduljaleel Ibrahim, Mustafa Hussein Ibrahim
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.