INFLUENCE OF NONEQUILIBRIUM CONDITIONS OF HARDENING ON MECHANICAL PROPERTIES FOUNDINGS RECEIVED ON THE BASIS OF ALLOYS OF SYSTEM Al-Si-Cu
DOI:
https://doi.org/10.15587/1729-4061.2010.2983Keywords:
modifying, gaz-dynamyc influence, casting, chill mould, mechanical propertiesAbstract
The analysis of results of researches on modifying influence by ultradisperse modifier TiCN and gaz-dynamyc influences on mechanical foundings properties received of aluminium alloys of system Al-Si-Cu is resulted.References
- Затвердевание металлического расплава при внешних воздействиях [Текст]/ А.Н. Смирнов, В.Л. Пилюшенко, С.В. Момот, В.Н. Амитан. - Д.: Издательство «ВИК» - 2002. - 169 с.
- Немененок, Б.М. Теория и практика комплексного модифицирования силуминов [Текст] / Б.М. Немененок - Мн. Технопринт, 1999. – 272 с.
- Калиниченко, А.С. Управляемое направленное затвердевание и лазерная обработка: теория и практика [Текст] / А.С. Калиниченко, Г.В. Бергман - Мн.: Технопринт, 2001. - 367 с.
- Закономерности формирования структуры слитков алюминиевых сплавов при непрерывном литье с ультразвуковой обработкой кристаллизующегося расплава [Текст] / В.И. Добаткин, Г.И. Эскин, С.И. Боровикова, Ю.Г. Гольдер. - М.: Наука - 1976. - С.151-161.
- Скворцов, А.А. Влияние внешних воздействий на процесс формирования слитков и заготовок [Текст] / А.А. Скворцов, А.Д. Акименко, В.А. Ульянов– М.: Металлургия, 1995. – 272 с.
- Ефимов, В.А. Физические методы воздействия на процессы затвердевания сплавов [Текст] / В.А. Ефимов, А.С. Эльдарханов. – М.: Металлургия, 1995. – 272 с.
- Эльдарханов, А.С. Процессы кристаллизации в поле упругих волн [Текст] / А.С. Эльдарханов. – М.: Металлургия, 1996. – 256 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Юрий Валериевич Доценко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
