Computer energy-saving technologies for building life-support systems control
DOI:
https://doi.org/10.15587/1729-4061.2014.30503Keywords:
energy saving, building life-support systems, alternative heating, computer-integrated control systemsAbstract
Energy saving in building life-support systems is a complex problem of global concern. As a result of the studies, functional diagrams of computer-integrated control systems for technological processes of traditional (upgrading of existing) and alternative (development of new) heating systems are developed. Developed functional schemes allow to improve the operating efficiency of building life-support systems and save the material and energy resources in conditions of scarcity for:
• modernized individual heat point with heating and hot water treatment systems of the building through the energy-saving efficiency improvement, air temperature control in each room individually, heat energy consumption accounting for each apartment that encourages timely payment by tenants;
• solar collector systems through the air temperature control in each room individually, including in very hot summer (air conditioning), energy saving;
• systems for obtaining and using geothermal energy for four heat transfer cycles through creating favorable conditions in premises (especially office premises), energy saving.
Saving material and energy resources through applying computer energy-saving technologies for building life-support systems control promotes solving an urgent problem of global scale - energy saving.
References
- IEA (2012). World Energy Outlook 2012. International Energy Agency. OECD/IEA,Paris, 690.
- IEA (2013). World Energy Outlook 2013. International Energy Agency. OECD/IEA, Paris, 700.
- Bull, S. R. (2001). Renewable Energy Today and Tomorrow. Proc. of The IEEE, 89 (8), 1216–1226. doi: 10.1109/5.940290
- Bobuh, A. A., Kovalyov, D. A. (2013). Kompjuterno-integrirovannaja sistema avtomatizacii tehnologicheskih obektov upravlenija centralizovannym teplosnabzheniem: monografija. Kharkiv. : HNUGH im. A. N. Beketova, 226.
- Arnulf, J.-W. (2010). PV Status Report. European Commission, DG Joint Research Centre, Institute for Energy, Renewable Energy Unit. Ispra (VA), Italia, 124.
- Derjugina, G. V., Malinin, N. K., Pugachev, R. V., Shestopalova, T. A. (2012). Osnovnye harakteristiki vetra. Resursy vetra i metody ih rascheta. Moskow.: Izdatelstvo MJeI, 260.
- Alfjorov, Zh. I., Andreev, V. M., Rumjancev, V. D. (2004). Tendencii i perspektivy razvitija solnechnoj fotojenergetiki. Fizika i tehnika poluprovodnikov, 38 (8), 937–948.
- Glikson, A. L., Doroshenko, A. V. (2004). Geliosistemy i teplovye nasosy v sistemah avtonomnogo teplo- i holodosnabzhenija. AVOK, 7, 18–23.
- Chiras, L. D. (2002). The Solar House: passive solar heating and cooling. White River Junction,Vermont: Chelsea Green Publishing Company, 274.
- Sidkina, E. S. (2013). Geohimija podzemnyh rassolov zapadnoj chasti Tungusskogo artezianskogo bassejna. Tomsk, 21.
- Zhuk, V. I. (2010). Mikroprocessornye kontrollery i sistemy upravlenija na ih osnove: opyt postroenija. Jenergetika i TJeK, 01 (82), 41–43.
- Bobuh, A. A., Kovalyov, D. A. (2014). Povyshenie jenergosberezhenija zakrytogo centralizovannogo teplosnabzhenija goroda pri rekonstrukcii central'nogo i modernizacii individual'nogo teplovyh punktov. Jenergosberezhenie Jenergetika Jenergoaudit, 03 (121), 12–18.
- Kovalyov, D. A., Bobuh, A. A. (2013). Avtomatizacija tehnologicheskih processov sistem solnechnyh kollektorov i kondicionirovanija vozduha. Jenergosberezhenie Jenergetika Jenergoaudit, 07 (113), 2–6.
- Kovalyov, D. A., Bobuh, A. A. (2013). Povyshenie jenergojeffektivnosti poluchenija i ispolzovanija geoteplovoj jenergii za schet avtomatizacii tehnologicheskih processov. Jenergosberezhenie Jenergetika Jenergoaudit, 10 (116), 18–23.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Анатолій Олексійович Бобух, Дмитро Олександрович Ковальов, Андрій Олександрович Клімов, Олександр Михайлович Дзевочко
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
