Method devised to improve technological reliability of machine parts

Authors

  • Ярослав Маркіянович Кусий National University «Lvivska politekhnika» Bandery 12, Lviv, Ukraine, 79013, Ukraine https://orcid.org/0000-0001-5741-486X
  • Андрій Михайлович Кук National University «Lvivska politekhnika» Bandery 12, Lviv, Ukraine, 79013, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2015.36336

Keywords:

technology, reliability, infallibility, cylinder sleeve/ liner, surface layer, centrifugal vibration strengthening

Abstract

Considering reliability as a primary criterion in engineering machines and mechanical parts, we have analyzed why cylinder sleeves of drilling pumps fail in operation. Finishing and strengthening procedures in the technological process have proved to have essential influence on reliability indices. We have found that vibration technologies used in finishing and strengthening manufactured products can improve the operational qualities of machine parts. We have devised a method of centrifugal vibration strengthening to enhance reliability of the sleeves. The vibration machine for surround processing is adapted for centrifugal vibration strengthening of the shell. We have suggested a schematic diagram of equipment for centrifugal vibration strengthening as well as described the structure and operation principles of the equipment. The suggested industrial equipment is meant for centrifugal vibration strengthening of cylinder sleeves of drilling pumps.

We have studied and analyzed profile charts of surfaces strengthened by vibration. The analysis of the research findings has revealed that the height and stepping parameters of the processed surface (Ra, Rz, Rр, Rmax, and S) have decreased 1.5–5.8 times, which proves that vibration strengthening has cut or deformed the protrusion tips on the surface relief. The act on the results of our field tests shows that after the centrifugal vibration strengthening of the cylinder sleeves of drilling pumps the average MTBF Тahas increased 1.79 times in comparison with original ground and heat treated sleeves. Besides, the economic effect is achieved through using steel of type 20 instead of type 70.

We have specified research perspectives on optimizing the processing modes and developing practical recommendations on using centrifugal vibration strengtheners with a debalance drive aimed at improving the operational characteristics of sleeves as machine parts. 

Author Biographies

Ярослав Маркіянович Кусий, National University «Lvivska politekhnika» Bandery 12, Lviv, Ukraine, 79013

Assistant professor

Department of mechanical engineering technology

Андрій Михайлович Кук, National University «Lvivska politekhnika» Bandery 12, Lviv, Ukraine, 79013

Assistant professor

Department of mechanical engineering technology

References

  1. Оstrejkovskyj, V. А. (2003). Theory of reliability: textbook for institutions. Moscow, 463.
  2. Pronikov, А. S. (1978). Machines reliability. Moscow, 592.
  3. Аftanaziv, І. S. (1998). Reliability technological providing of machines details. Mechanical engineering technology. Lviv, 132.
  4. Trukhanov, V. M. (2003). The technical systems reliability of movable options type on the stage of planning and test of pre-production models. Moscow, 320.
  5. Reshetov, D. N. Ivanov, A. S., Fadeev, V. Z. (1983). Machines reliability. Moscow, 237.
  6. Polovko, A. M., Gurov, S. V. (2006). Reliability theory bases. Saint Petersburg, 704.
  7. Alexsandrovskaja, L. N., Afanasjev, A. P., Lisov, A. A. (2001). The modern methods of faultlessness providing of the difficult technical systems. Moscow, 208.
  8. Suslov, A. G. (2000). The superficial layer’s quality of machines detail. Moscow, 320.
  9. Schneider, Y. G. (1982). Operating properties of details with regular microrelief. Leningrad, 248.
  10. Ushakov, I. A. (1985). Reliability of the technical systems. Moscow, 606.
  11. Jashcheritcyn, P. I., Minakov, A. P. (1986). The non-rigid details strengthening’s treatment in the engineer. Minsk, 215.
  12. Shyrokov, V. V., Kusyj, Y. M., Аftanaziv, І. S., Borovatc V. M., Kuk A. M. (2010). Development of the technological rigging for the improvement of operating descriptions of details of oil-gas equipment. Efficiency of realization scientific, resource and industrial potential of in modern terms. X – Industrial conference with international participation, Slavske, Carpathians, 243–246.
  13. Kusyj, Y. M. (2002). Technological security of physics-mechanical parameters of metal long-sized cylindrical detail’s surface layers by means of vibrational - centrifugal strengthening. Technology of machine building. Lviv, 260.
  14. Bykov, I. Y., Tchadaja, N. D. (2004). Operating reliability and capacity of boring machines. Ukhta, 196.
  15. Jashcheritcyn, P. I., Ryzhov, E. V, Averchenko V. I. (1977). Technological heredity in the engineer. Minsk, 256.
  16. Kusyj, Y. M., Topilnytskyj, V. G. (2013). The quality surface’s research of the vibrofortified machines details. Announcer of National univarsity "Lvivska політехніка" "Optimization of productive processes and technical control in an engineer and instrument-making", 772, 196–201.
  17. Aftanaziv, I., Kusyj, J., Kuritnyk, I. P. (2000) Using vibrations for strengthening of long-sized cylindrical details. Acta Mechanica Slovaca, Košice, 3, 43–46.
  18. Kusyj, J., Topilnitskiyy, V. (2009). Сalculations of vibratory-centrifugal strengthening treatment’s dynamics by means of application software. Book of abstracts XVII Polish-Ukrainian Conference on “CAD in Machinery Design – Implememtation and Educational Problems”, 25–26.
  19. Stotsko, Z., Kusyj, J., Topilnytskyj, V. (2012). Research of vibratory-centrifugal strain hardening on surface quality of cylindric long-sized machine parts. Journal of Manufacturing and Industrial Engineering, 11 (1), 15–17.
  20. Shyrokov, V. V., Arendar, L. A., Kovalchyk, Y. I., Vasyliv, H. B., Vasyliv, O. M. (2005). The friction surfaces profilogram computer’s treatment. Physical and chemical mechanics of materials, 1, 93–96.

Downloads

Published

2015-02-25

How to Cite

Кусий, Я. М., & Кук, А. М. (2015). Method devised to improve technological reliability of machine parts. Eastern-European Journal of Enterprise Technologies, 1(7(73), 41–51. https://doi.org/10.15587/1729-4061.2015.36336

Issue

Vol. 1 No. 7(73) (2015): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2015 Ярослав Маркіянович Кусий, Андрій Михайлович Кук

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.