Constructive-technological modeling of composite constructions using the system analysis
DOI:
https://doi.org/10.15587/1729-4061.2015.47348Keywords:
constructive-technological model, composite constuction, modular assembly devices, systems analysisAbstract
Along with effective system analysis methods, the problem of the detailed description of objects and relations between them in systems is still topical in modeling composite constructions and technologies for their preparation. The problem is complicated by specific requirements for composite materials in the construction. Building and analysis of the composite construction model for classical assembly devices (with rigid basic elements) point out the unreasonableness of use, and as a result - of the assembly technology in general.
The proposed combined formalized model of the construction made of composite materials in the modular assembly allows to describe the above technology in detail and analyze the construction in all necessary areas and assembly parts without destroying the overall structure of the model. Concurrent deployment of components made of composite materials in the appropriate modular devices and their fixation by specialized tools allows to reduce the overall assembly cycle excluding labor-intensive fitting and refinement operations. The implementation algorithm of such technology with the possibility of inter-operation data control and correction using automated assembly equipment and systems was considered.References
- Pasichnyk, V. A., Khmurenko, O. O. (2015). Metodyka formuvannia spetsyfichnykh vymoh pry modeliuvanni kesonnykh konstruktsii iz polimernykh kompozytsiinykh materialiv. Visnyk NTUU «KPI». Seriia «Mashynobuduvannia», № 74, 64–66.
- Masiagin, V. B. (2013). Rasshirenie oblastei teoreticheskogo i prakticheskogo primeneniia razmernogo analiza v mashinostroenii. Mat. konf. SWorld. Perspective innovations in science, education, production and transport ‘2013. Tehnicheskie nauki – Mashinovedenie i mashinostroenie, 17-26 December 2013. Available: http://www.sworld.com.ua/index.php/ru/technical-sciences-413/machines-and-mechanical-engineering-413/20796-413-0636
- Masiagin, V. B., Martynov, V. G. (2012). Primenenie setei Petri pri modelirovanii shemy sborki. Materialy VII Mezhdunarodnoi nauchno-tehnicheskoi konferentsii. Sektsiia № 5. Tehnologii mehanicheskoi i fiziko-tehnicheskoi obrabotki, 323–327.
- Primak, D. D., Volkov, I. A. (2014). Metodika postroeniia razmernyh tsepei s pomoshch'iu grafa modulei poverhnostei. Nauchnyi zhurnal «Vestnik magistratury, № 6 (33), Vol. I, 81–83.
- Vysloukh, S. P., Filippova, M. V. (2006). Metodyka avtomatyzovanoho proektuvannia tekhnolohii skladannia vyrobiv pryladobuduvannia. Visnyk NTUU «KPI». Seriia «Mashynobuduvannia», № 32, 111–117.
- Korenkov, V. M., Subin, A. A. (2008). Metod strukturnoho syntezu ta otsinky alternatyv pry avtomatyzovanomu syntezi tekhnolohichnykh protsesiv skladannia vyrobiv. Visnyk ZhDTU. Seriia «Tekhnichni nauky», № 4 (47), 155–160.
- Korenkov, V. M. (2003). Model avtomatyzovanoho syntezu marshrutnoho tekhnolohichnoho protsesu skladannia vyrobiv. Visnyk tekhnolohichnoho universytetu Podillia, № 4, Part 2, 228–235.
- Solomentsev, Yu. M., Chekmenev, S. E., Frolov, E. B., Kriukov, V. V. (2010). O problemah avtomatizatsii etapov zhiznennogo tsikla izdeliia. Vestnik MGTU "Stankin", № 4 (12), 122–125.
- Bozhko, A. N. (2011). Modelirovanie mehanicheskih sviazei izdeliia. Elektronnoe nauchno-tehnicheskoe izdanie «Nauka i obrazovanie». Available: http://technomag.bmstu.ru/doc/182518.html
- Pasichnyk, V. A. (2014). Binarni vidnoshennia obmezhen rukhlyvosti – osnova matematychnoho opysu skladalnykh vyrobiv. Suchasni tekhnolohii mekhano-skladalnoho vyrobnytstva, № 1, 57–61.
- Gonsales-Sabater, A. (1999). Sistema avtomatizirovannogo proektirovaniia tehnologii instrumental'nogo proizvodstva. Mashinostroitel', № 4, 54–59.
- Masiagin, V. B., Volgina, N. V. (2011). Semanticheskii podhod k avtomatizatsii kodirovaniia konstruktorsko-tehnologicheskoi informatsii. Mater. nauch.-tehn. konf. "Omskii region – mestorozhdenie vozmozhnostei". Omsk: OmGTU, 63–65.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Олексій Олександрович Хмуренко, Віталій Анатолійович Пасічник
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
