Heat treatment 80Х3СВФ became with the use of cooling in the friable graphite

Authors

  • Владимир Кириллович Заблоцкий Donbass State Engineering Academy street. Shkadinova, 72, Kramatorsk, 84 313, Ukraine
  • Владимир Игоревич Шимко Donbass State Engineering Academy street. Shkadinova, 72, Kramatorsk, 84 313, Ukraine
  • Алексей Игоревич Шимко Public Joint Stock Company "Novokramatorsk Engineering Works" street. Ordzhonikidze, 5, Kramatorsk, 84 305, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2012.4918

Keywords:

structure, warming, steel, heat treatment.

Abstract

Processes, flowing at the continuous cooling 80Х3СВФ became from the temperature of austenitization in a friable graphite, are studied, on air and with a stove, it is set that with diminishing of cooling speed duration of pearlite transformation is increased.

Author Biographies

Владимир Кириллович Заблоцкий, Donbass State Engineering Academy street. Shkadinova, 72, Kramatorsk, 84 313

Doctor of Technical Sciences, professor, head of

Department of Technology and Equipment of foundry

Владимир Игоревич Шимко, Donbass State Engineering Academy street. Shkadinova, 72, Kramatorsk, 84 313

Graduate student

Department of Technology and Equipment of foundry

Алексей Игоревич Шимко, Public Joint Stock Company "Novokramatorsk Engineering Works" street. Ordzhonikidze, 5, Kramatorsk, 84 305

Ph.D., head of the laboratory

Laboratory of metallurgy and heat treatment, the department chief metallurgist

References

  1. Заблоцкий, В.К. Изменение исходной структуры стали 45Х3ГНМФ при нагреве для повторной закалки / В.К. Заблоцкий В.И. Шимко. – Восточно-европейский журнал передовых технологий – 2010 – 6/1(48) – С. 31 – 34.
  2. Заблоцкий, В.К. Особенности структурно-фазовых превращений в сталях 45Х3ГНМФ и 70Х5ВМФ при охлаждении в изотермических условиях / В.К. Заблоцкий, В.И. Шимко. – Вестник Донбасской государственной машиностроительной академии, 2012 - №1(22) – С.193 – 198.
  3. Заблоцкий, В.К. Исследование превращений при изотермической выдержке переохлажденного аустенита стали 55Х4СМФ / В.К. Заблоцкий, И.Ю. Мелещенко. – Восточно-европейский журнал передовых технологий. – 2008. – 5/1(35) – С. 47 – 51.
  4. Заблоцкий, В.К. Особенности структурно-фазовых превращений в стали 45Х3ГНМФ при непрерывном охлаждении и в изотермических условиях / В.К. Заблоцкий, В.И. Шимко. – Строительство, Материаловедение, Машиностроение: – Сб. науч. трудов. Выпуск 58, Днепропетровск, ПГАСиА, 2011г – 292-294 с.

Downloads

Published

2012-07-05

How to Cite

Заблоцкий, В. К., Шимко, В. И., & Шимко, А. И. (2012). Heat treatment 80Х3СВФ became with the use of cooling in the friable graphite. Eastern-European Journal of Enterprise Technologies, 4(5(58), 14–17. https://doi.org/10.15587/1729-4061.2012.4918

Issue

Vol. 4 No. 5(58) (2012): The applied physics and materials technology

Section

Applied physics

License

Copyright (c) 2014 Владимир Кириллович Заблоцкий, Владимир Игоревич Шимко, Алексей Игоревич Шимко

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.