Increasing of wear resistance of steels due to obtaining metastable structure, which can to strengthen by itself under the pressure
DOI:
https://doi.org/10.15587/1729-4061.2012.4919Keywords:
austenite, dynamical deformative martensite transformation, soaking.Abstract
The results of influence of different hit treatment on wear resistance of steels 55G, 65G and 75G are shown in this research paper. It is proved that due to efficient hit treatment it may be obtained good combination of service properties.References
- Малинов, Л.С. Экономнолегированые сплавы с мартенситным превращением и упрочняющие технологии [Текст] / Л.С. Малинов, В.Л. Малинов. – Харьков : ННЦ ХФТИ, 2007 – 259 с.
- Малинов, Л.С. Ресурсосберегающие экономнолегированые сплавы и упрочняющие технологии, обеспечивающие эффект самозакалки [Текст] / Л.С. Малинов, В.Л. Малинов. – Мариуполь : Рената, 2009. – 259 с.
- Тененбаум, М.М. Износостойкость конструкционных материалов и деталей машин при абразивном изнашивании [Текст] / М.М. Тененбаум. – М. : Машиностроение, 1966. – 331 с.
- Малинов, Л.С. Влияние количества и стабильности остаточного аустенита на износостойкость сталей 55С2, 6ХС и высокопрочного чугуна ВЧ–50, подвергнутых изотермической закалке [Текст] / Л.С. Малинов, И.Е. Малышева, В.В. Бруй // Металл и литье Украины. – 2002. – № 7–8. – С. 54–57.
- Малышева, И.Е. Повышение абразивной и ударно-абразивной износостойкости сталей и чугунов за счет метастабильного аустенита [Текст]: Дис… канд. техн. наук: 12.11.04. / И.Е. Малышева. – Мариуполь, 2004. – 158 с.
- Малинов, Л.С. Повышение свойств сталей и высокопрочного чугуна получением в них многофазных структур, включающих бейнит и метастабильный аустенит [Текст] / Л.С. Малинов // Металл и литье Украины. – 2004. – № 7. – С. 24–28.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Леонид Соломонович Малинов, Наталья Аркадьевна Солидор, Виктор Алексеевич Харлашкин, Виктор Васильевич Аниченков
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
