Experimental research of single-piece separation process in magazine loader of shoe machines

Authors

  • Сергій Анатолійович Поповіченко Kiev National University of Technology and Design 2 Nemirovich-Danchenko str., Kyiv, Ukraine, 01011, Ukraine
  • Броніслав Вікентійович Орловський Kiev National University of Technology and Design 2 Nemirovich-Danchenko str., Kyiv, Ukraine, 01011, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2015.50437

Keywords:

shoe machines, magazine loader, single-piece separation of shoe parts, automatic loading

Abstract

The paper describes the method and design of the experimental setup for investigating the single-piece separation process in magazine loader of shoe machines, in which an additional mechanism for vertical shock impact on the stack of parts in the initial moment of single-piece separation is used to improve the single-piece separation conditions. The influence of factors such as single-piece separation force, vertical shock pulse and the number of parts in the stack on the single-piece separation process was examined. It was found that using the shock pulse allows to reduce the single-piece separation force by 30-40% compared to its value in the separation of parts from the stack without the shock pulse. It can be concluded about the feasibility of using the shock impact on the stack of parts in magazine loader of shoe machines to reduce the single-piece separation force and thus improve the separation process conditions.

Author Biographies

Сергій Анатолійович Поповіченко, Kiev National University of Technology and Design 2 Nemirovich-Danchenko str., Kyiv, Ukraine, 01011

assistant

Department of light industrial machines

Броніслав Вікентійович Орловський, Kiev National University of Technology and Design 2 Nemirovich-Danchenko str., Kyiv, Ukraine, 01011

Professor, Doctor of Technical Sciences

Department of light industrial machines

References

  1. Kricberg, Je. L., Piskorskij, G. A. (1971). Avtomaticheskie zagruzochno-orientorujushhie ustrojstva obuvnyh mashin (obzor). Moscow: «Legkaja industrija», 52.
  2. Polishhuk, V. N. (1971). Issledovanie processa poshtuchnogo otdelenija ploskih detalej obuvi v vibracionnyh magazinnyh zagruzochnyh ustrojstvah. Kyiv, 179.
  3. Bazlova, L. V., Suslova, A. A. (1969). Zagruzochnye, orientirujushhie, transportirujushhie i podajushhie ustrojstva dlja malogabaritnyh detalej. Tula.: Otechestvennaja i zarubezhnaja literatura za 1963–1969, 92.
  4. Bobrov, V. P. (1961). Razvernutaja klassifikacija avtomaticheskih zagruzochnyh prisposoblenij. Peredovoj nauchno-tehnicheskij opyt, 2, 51.
  5. P. M. Taylor (Ed.) (1990). Sensory Robotics for the Handling of Limp Materials. Series F: Computer and Systems Sciences. Vol. 64. Springer Berlin Heidelberg, 342. doi: 10.1007/978-3-642-75533-0
  6. Sarhadi, M., Nicholson, P. R., Simmons, J. (1986). Advances in gripper technology for apparel manufacturing. IMechE, C372 (86), 47–53.
  7. Taylor, P. M., Koudis, S. G. (1987). Automated handling of fabrics. Science Progress, 71 (3 (283)), 351–363.
  8. Taylor, P. M., Taylor, G. E. (1990). Progress towards automated garment manufacture. Chapter II. NATO ASI Series. Sensory Robotics for the Handling of Limp Materials, 97–109. doi: 10.1007/978-3-642-75533-0_8
  9. Kelley, R. B. (1991). Research on the automated handling of garments for pressing. Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments, 796–801. doi: 10.1109/icar.1991.240577
  10. Schulz, G. (1991). Grippers for flexible textiles. Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments, 759–764. doi: 10.1109/icar.1991.240584
  11. Karakerezisa, A., Doulgerib, Z., Petridisb, V. (1994). A gripper for handling flat non- rigid materials. Proceedings of the 11th International Symposium on Automation and Robotics in Construction, 593–601. doi: 10.1016/b978-0-444-82044-0.50082-5
  12. Watanabe, T., Asari, Y., Naruoka, Y., Hiramutsu, N., Mitsuya, Y. (2010). Patent US 7815184 B2 , B65H3/52. Paper sheet separating and take-out device. Publication: 19.10.2010; registration: 11.05.2007
  13. Patent US 5718424 A, B65H3/52. Sheet feeding device having a separating and prestressing device (1998). Publication: 17.02.1998; registration: 25.01.1996.
  14. Patent US 7571800 B2, B65G27/16 Vibrating alignment conveyor (2009). Publication: 11.08.2009; registration: 30.10.2007.
  15. Popovichenko, S. A., Jankin, L. M. (2005). Sposoby pidvyshhennja nadijnosti magazynnyh zavantazhuval'nyh prystroi'v vzuttjevyh mashyn. Visnyk Kyi'vs'kogo nacional'nogo universytetu tehnologij ta dyzajnu, 2 (5 (25)), 44–46.
  16. Jankin, L. M., Popovichenko, S. A. (2007). Vyznachennja parametriv dempfuvannja stosu zrazkiv detalej nyzu vzuttja vygotovlenyh z mikroporystoi' gumy. Visnyk Kyi'vs'kogo nacional'nogo universytetu tehnologij ta dyzajnu, 5 (37), 73–77.
  17. Orlovs'kyj, B. V., Popovichenko, S. A. (2012). Doslidzhennja zakonomirnostej postudarnogo goryzontal'nogo ruhu detali nyzu vzuttja z magazynnogo zavantazhuval'nogo prystroju. Visnyk KNUTD. Special'nyj vypusk, prysvjachenyj mizhnarodnoi' Ukrai'ns'ko-Pol's'koi' naukovo-tehnichnoi' konferencija «Techno and Design», 3, 76–80.
  18. Tihomirov, V. B. (1974). Planirovanie i analiz jeksperimenta. Moscow: Legkaja industrija, 262.

Downloads

Published

2015-10-20

How to Cite

Поповіченко, С. А., & Орловський, Б. В. (2015). Experimental research of single-piece separation process in magazine loader of shoe machines. Eastern-European Journal of Enterprise Technologies, 5(7(77), 46–53. https://doi.org/10.15587/1729-4061.2015.50437

Issue

Vol. 5 No. 7(77) (2015): Applied mechanics

Section

Applied mechanics

License

Copyright (c) 2015 Сергій Анатолійович Поповіченко, Броніслав Вікентійович Орловський

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.