Development of technology of portland cement using gas condensate sludge recycling waste
DOI:
https://doi.org/10.15587/1729-4061.2015.55118Keywords:
gas sludge, organic-mineral additive, Portland cement clinkerAbstract
The paper deals with the topical issue of increasing the energy efficiency of manufacturing construction materials, such as Portland cement, applying organic-mineral additives. Using gas industry waste - gas sludge as the organic-mineral additive is proposed. Gas sludge due to its chemical composition accelerates the rate of chemical reactions during firing the raw mix of Portland cement clinker, thereby saving energy. Energy saving is associated with a decrease in temperature of the relevant physicochemical reactions during the Portland cement clinker firing.
The paper contains the analysis of theoretical and practical aspects of the problem, proposes solutions to improve the energy efficiency of Portland cement clinker production by applying the organic-mineral additive, in particular gas sludge, which lowers the temperature of chemical reactions, and also considers the features of chemical reactions in the process of Portland cement clinker firing using the gas sludge waste in the raw mix.
References
- Leont`ev, S. A., Galikeev, R. M., Fominykh, O. V. (2010). Calculation of process units of the system of collection and preparation of borehole production. Tyumen, 256.
- Korzhubaev, A. G. (2012). Napravlenija i mehanizmy obespechenija tehnologicheskoj bezopasnosti neftegazovogo kompleksa Rossii. Burenie i neft', 4, 8–10.
- Klassen, V. K. (2012). Tehnologija i optymizacija vyrobnyctva cementu. Belgorod: BDTU, 308.
- Lugynyna, V. R. (2004). Himija i himichna tehnologija neorganichnyh v'jazhuchyh materialiv. Belgorod: BDTU, 1, 240.
- Bajkov, N. M. (2007). Utilizacija neftjanogo i uglekislogo gaza dlja povyshenija nefteotdachi na mestorozhdenijah SShA i Kanady. Neftjanoe hozjajstvo, 6, 105–108.
- Ratinov, V. B., Rozenberg, T. I., Rubinina, I. M. (1962). Cementy. DAN SSSR, 145 (5).
- Kalashnikov, V. I. Guljaeva, E. V., Valiev, D. M., Volodin, V. M., Hvastunov, A. V. (2011). Vysokojeffektivnye poroshkovo-aktivirovannye betony razlichnogo funkcional'nogo naznachenija s ispol'zovaniem super-plastifikatorov. Stroitel'nye materialy, 11, 44–47.
- Hodzhomurodov, S. (2003). Osnovnye polozhenija i primenenie OTDV mikrodur v stroitel'stve Puti razvitija promyshlennosti stroitel'nyh materialov respubliki. Dushanbe, 3–7.
- Burlov, A. Ju., Samchenko, S. V. (2011). Vlijanie al'ternativnogo topliva na klinkeroobrazovanie i kachestvo klinkera. Materialy seminara-konkursa molodyh uchenyh i aspirantov. St. Petersburg: Alitinform, 30–35.
- Brown, W. E., Chow, L. C. (2003). A new calcium phosphate fast-setting cement. Journal of Dental Research, 62.
- Association of portlandcement. Available at: http://www2.cement.org
- Romeo, L. M., Catalina, D., Lisbona, P., Lara, Y., Martínez, A. (2011). Reduction of greenhouse gas emissions by integration of cement plants, power plants, and CO2 capture systems. Greenhouse Gases: Science and Technology, 1 (1), 72–82. doi: 10.1002/ghg3.5
- Oberhauser, S., Kather, S. (2011). CO2-Capture from cement plants applying oxyfuel concepts. 2nd International Conference on Energy Process Engineering. Efficient Carbon Capture for Coal Power Plants. Frankfurt/Main.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 Татьяна Дмитриевна Рыщенко, Константин Игоревич Вяткин
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.