Technology of recycling radioactively contaminated metal by the method of melting

Authors

DOI:

https://doi.org/10.15587/1729-4061.2016.74847

Keywords:

technology of recycling radioactively contaminated metal, radionuclides, self deactivation, melting

Abstract

A technology is proposed of recycling radioactively contaminated metal by the method of melting, based on the effect of self deactivation. In accordance with this technology, radioactively contaminated metal is loaded into a melting furnace without the operation of preliminary decontamination. In the process of melting, the radionuclides located on its surface pass into molten metal and are distributed evenly in its volume. Beyond the limits of products made of this metal is the gamma-radiation of a small part of the radionuclides contained by them.

Gamma radiation of the remaining radionuclides, as well as alpha-radiation and beta-radiation of radionuclides, is completely absorbed in the volume of metal. As a result, the process of melting led to a considerable decrease in the power of ionizing radiation on the surface of metal. That is why this effect can be named the self deactivation of metal during its melting. At the same time, some radionuclides evaporate while a part of them passes to slag, further purifying metal. As a result, the conditions are created for obtaining the metal that is safe as far as the radiation is concerned.

The ratios are presented, which make it possible to calculate the amount of gamma-emitting radionuclides that can be loaded to a melting furnace in order to ensure a required level of the power of gamma radiation on the surface of the smelted metal.

It was demonstrated that the criterion of evaluation of radiation safety of metal is the power of gamma radiation on its surface.

In the implementation of this approach, both the known technologies of melting metals and the equipment of melting furnaces are not in fact complicated. This makes it possible to considerably increase technical and economic indicators of the process of recycling radioactively contaminated metal and to decrease substantially the volumes of accumulated radioactive wastes.  

Author Biographies

Valeriy Balakin, National Metallurgical Academy of Ukraine Gagarina str., 4, Dnipro, Ukraine, 49005

Doctor of Technical Sciences, Professor

Department of technological engineering

Viktor Mashinistov, National Metallurgical Academy of Ukraine Gagarina str., 4, Dnipro, Ukraine, 49005

PhD, Associate Professor

Department of technological engineering

Oleg Galkin, National Metallurgical Academy of Ukraine Gagarina str., 4, Dnepr, Ukraine, 49005

Senior teacher

Department of technological engineering

Kostiantyn Bilan, National Metallurgical Academy of Ukraine Gagarina str., 4, Dnepr, Ukraine, 49005

Assistant

Department of technological engineering

References

  1. Ampelogova, N. I., Trapeznikov, A. A. (1982). Dezaktivaciya v yadernoj energetike. Moscow: Еnergoizdat, 256.
  2. Lampard, D., Hillis, K. (2007). Pereplavka radioaktivnogo metalloloma. Atomnaya tehnika za rubezhom, 3, 27–30.
  3. Copeland, Y. I. (1981). Decontamination of TRU – Contaminated metal Waste by Smelt. Refing. Trans.Nucl.Soc., 38, 193–195.
  4. Nakamura, H., Kanasawa, K., Fujiki, K. (1995). R&D on Melting of Radioactive Metal Wastes at JAERI. Proceedings 3rd JSME/ASME Joint International Conference On Nuclear Engineering (ICONE–3), 4, 1785–1789.
  5. Menon, S. (1999). Decommissioning of Nuclear Submarines: Waste Minimization by Recycling, Analysis of Risks Associated with Nuclear Submarine Decommissioning, Dismantling and Disposal, NATO. Dordrecht, Kluwer Academic Publishers, 129–136.
  6. Berezhko, B. I. (1995). Utilizacija radioaktivnyh metallicheskih othodov metodom pereplava. Voprosy materialovedeniya, 2, 74–77.
  7. Copeland, Y. L. (1978). Volume reduction of lomlevel contaminated metal Waste by Smelting. Trans. Amer. Nucl. Soc, 30, 285–286. doi: 10.2172/6809639
  8. Gudim, Yu. A. (2008). Toplivokislorodnyj plavilnyj agregat nepreryvnogo dejstviya, ego primenenie v metallurgii i dlya utilizacii othodov. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta. Seriya: Metallurgiya, 24 (124), 16–23.
  9. Kompleksnaya pererabotka tverdyh radioaktivnyh othodov metodom plavleniya. Available at: http://www.nkj.ru/open/23369/ (Last accessed: 15.05.2016).
  10. Cheremisin, P. I. (2008). Obrashhenie s metallicheskimi othodami, zagryaznennymi radioaktivnymi veshhestvami. Recikling othodov, 2 (14), 2–5.
  11. Gasik, M. I., Koval, A. V., Gavrilov, V. A. (1999). Prirodnaya radioaktivnost shihtovyh materialov i produktov plavki ferrosplavov. Aktual'nye problemy i perspektivy elektrometallurgicheskogo proizvodstva, 427.
  12. Zlobinskii, B. M., Nemtsov, N. S. (1963). Radioaktivnye izotopy v domennom proizvodstve: metodika primeneniya i voprosy bezopasnosti. Moscow: Metallurgizdat, 96.
  13. Mashinistov, V. Ye., Galkin, O. F. (2015). Tehnologiya utilizacii radioaktivno zagryaznennogo metalla na metallurgicheskih predpriyatiyah. Dnepropetrovsk. Available at: http://metaljournal.com.ua/Utilization-technology-of-radioactively-contaminated-metals-from-smelters/ (Last accessed: 15.05.2016).
  14. Mashinistov, V. Ye., Galkin, O. F. (2015). Ocenka radiacionnoj obstanovki pri utilizacii radioaktivno zagryaznennogo metalla s ispolzovaniem effekta samodezaktivacii. Dnepropetrovsk. Available at: http://metaljournal.com.ua/Assessment-of-the-radiation-situation-in-the-disposal-of-radioactively-contaminated-metal-using-self-deactivation-effect/ (Last accessed: 15.05.2016).
  15. Balakin, V. F., Mashinistov, V. Ye., Galkin, O. F. (2015). Prakticheskie aspekty utilizacii radioaktivno zagryaznennogo metalla na metallurgicheskih predpriyatiyah. Dnepropetrovsk. Available at: http://www.metaljournal.com.ua/Practical-aspects-of-the-utilization-of-radioactively-contaminated-metals-from-smelters/ (Last accessed: 15.05.2016).
  16. Kimel, L. R., Mashkovich, V. P. (1972). Zashhita ot ioniziruyushhih izluchenij. Moscow: Atomizdat, 312.
  17. Maksimov, M. T., Oyagov, G. O. (1989). Radioaktivnye zagryazneniya i ih izmerenie. Мoscow: Energoatomisdat, 304.
  18. Pro zatverdzhennya derzhavnyh sanitarnyh pravyl «Osnovni sanitarni pravyla zabezpechennya radiacijnoi bezpeky Ukrainy». Nakaz Ministerstva ohorony zdorovya Ukrainy vіd 02.02.2005 (2005). Ofіc. vіsn. Ukraіny, 197.
  19. European Commission (1988). Recommended radiological protection criteria for the recycling of metals from the dismantling of nuclear installations. Radiation Protection, 89, 42.

Downloads

Published

2016-08-30

How to Cite

Balakin, V., Mashinistov, V., Galkin, O., & Bilan, K. (2016). Technology of recycling radioactively contaminated metal by the method of melting. Eastern-European Journal of Enterprise Technologies, 4(5(82), 31–37. https://doi.org/10.15587/1729-4061.2016.74847

Issue

Vol. 4 No. 5(82) (2016): Applied physics. Materials Science

Section

Applied physics

License

Copyright (c) 2016 Valeriy Balakin, Viktor Mashinistov, Oleg Galkin, Kostiantyn Bilan

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.

A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.