Choice of a rational type of explosive by the method of hierarchies’ analysis

Authors

  • Віктор Данилович Воробйов National Technical University of Ukraine Kiev Polytechnic Institute Borshchagivska 115, Kiev, Ukraine, 03056, Ukraine
  • Олег Маркович Терентьєв National Technical University of Ukraine Kiev Polytechnic Institute Borshchagivska 115, Kiev, Ukraine, 03056, Ukraine
  • Оксана Ярославівна Тверда National Technical University of Ukraine Kiev Polytechnic Institute Borshchagivska 115, Kiev, Ukraine, 03056, Ukraine

DOI:

https://doi.org/10.15587/1729-4061.2013.9165

Keywords:

Method of hierarchies’ analysis, explosive, blasting, rock, rational type

Abstract

Explosives are used for extraction of minerals, and demand for them is growing every year. The quality of preparation of mined rock and blasting safety depend on choice of the rational type of explosives. Therefore, one of the most important ways to increase the efficiency of destruction of rocks in quarries is the choice of an explosive with identification of the most effective variant by ranking of the criteria. A positive solution of this problem can be achieved using the method of hierarchies’ analysis. The article presents the calculation of the relative degree of importance of comparison criteria when selecting explosives for blasting in rocks. The analysis of calculations showed that the biggest weight (2.07) had the criterion of efficiency of explosives, and the lowest (0.3) had the safe distance criterion according to the effect of shock wave on a human. The greatest importance has the criterion of efficiency of explosives (0.31), the less importance has the safe distance criterion according to the effect of the shock air wave on a human (0.05). Using the method of hierarchies analysis we have compared the following explosives: polymix GR4-T10 polymix GR1/8 polymix GR1/8 (85%) + KRUK2 (15%), polymix GR1/8 (74%) + KRUK2 (26%) and compolite GS6 for use in the destruction of rocks (granites). The comparison revealed that the overall importance for each explosive has been respectively 0.12, 0.18, 0.17, 0.16 and 0.157. According to the degree of importance of each of explosive it was found that the most appropriate polymix for blasting in granites is GR1/8. The results can be used to design blasting in quarries rocks

Author Biographies

Віктор Данилович Воробйов, National Technical University of Ukraine Kiev Polytechnic Institute Borshchagivska 115, Kiev, Ukraine, 03056

Professor

DepartmentofEnvironmental Protection

Олег Маркович Терентьєв, National Technical University of Ukraine Kiev Polytechnic Institute Borshchagivska 115, Kiev, Ukraine, 03056

Professor

Department of Electromechanical equipment Energy-intensive Industries

Оксана Ярославівна Тверда, National Technical University of Ukraine Kiev Polytechnic Institute Borshchagivska 115, Kiev, Ukraine, 03056

Applicant

Department of  Environmental Protection

References

  1. The analytic hierarchy process of explosives types gives possibility to compare: polymix ГР4-Т10, polymix ГР1/8, polymix ГР1/8 (85%) + КРУК2 (15%), polymix ГР1/8 (74%) + КРУК2 (26%) and compolight ГС6 for the destruction of granites.
  2. The result of the comparison shown that the overall degree of importance for each of explosives is respectively 0.12, 0.18, 0.17, 0.16 and 0.157. According to the degree of importance of each of explosives it was found that the most suitable for explosive works on the granites is polymix ГР1/8

Downloads

Published

2013-03-20

How to Cite

Воробйов, В. Д., Терентьєв, О. М., & Тверда, О. Я. (2013). Choice of a rational type of explosive by the method of hierarchies’ analysis. Eastern-European Journal of Enterprise Technologies, 1(3(61), 46–50. https://doi.org/10.15587/1729-4061.2013.9165

Issue

Section

Control systems