Graph-analytical analysis of prediction of mechanical properties of welded joints of steel system Fe-Cr-Ni-Si
DOI:
https://doi.org/10.15587/1729-4061.2013.9281Keywords:
physical and mechanical properties, welding joint, optimization, deformation, high-melting elements, response surface.Abstract
The article discusses the possibility of using the graph-analytical method for the analysis of prediction of the mechanical properties of the welded joints of heat-resistant steels Fe-Cr-Ni-Si. The heat-resistant steels and alloys, used for the manufacture of parts, which operate at high temperatures under a hard-intense state for a specified period of time, should withstand the tension, causing the deformation that does not lead to destruction. The aim of the work is to optimize the chemical composition of the welded heat-resistant metal for fittings of thermic furnaces, to find the material with maximum performance characteristics, and to study the distribution of the mechanical properties (HV hardness) on section of welded joint and heat-affected zone from heat-resistant austenitic and austenitic-ferritic steels.Theoretically we have proved the possibility of correction of the defects of fittings of thermic furnaces by welding methods. We have held the graphic-analytical analysis of mathematical models in the form of regression equations, describing the joint influence of the alloying elements (C, Cr, Ni) and temperature gradient (T) on the physical and mechanical properties (HV hardness) of the heat-resistant steels and alloys. The optimal values for the content of the alloying elements were determined; they can provide the optimal values of the physical and mechanical properties of the welded metal: C = 0,14-0,19%, Cr = 21-23%, Ni = 17-19%.
References
- Каховский, Н. И. Сварка высоколегированных сталей [Текст] / Н. И. Каховский. – Киев. : «Техніка», 1975. – 376 с.
- Масленков, С. Б. Жаропрочные стали и сплавы [Текст] : справочное издание / С. Б. Масленков. – М. : Металлургия, 1983. – 192 с.
- Химушин, Ф. Ф. Жаропрочные стали и сплавы [Текст] / Ф. Ф. Химушин. – М. : Металлургия, 1969. – 752 с.
- Forecasting of mechanical properties of weld connections after the thermodeformation cycle on the basis of the mathematical regression analysis [Text] / S. N. Popov, V. V Naumik., T. V. Popova, D. A. Antonyuk // Нові матеріали та технології в металургії та машинобудуванні. – №1. – 2004. – С.150-156.
- Теория сварочных процессов [Текст] / Под ред. В. В. Фролова. – М. : «Высшая школа», 1988. – С.490-491.
- Лебедєв, Б. Д. Розрахунки в теорії зварних процесів [Текст]: навч. посібник / Б.Д. Лебедєв. – К. : НМК ВО, 1992. – 320 с.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Сергей Николаевич Попов
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.
