Comparative analysis of surface finishes of printed circuit boards
DOI:
https://doi.org/10.15587/1729-4061.2013.9312Keywords:
surface finishes, PCB, HASL, ENIG, OSP.Abstract
This article describes surface finishes which are the most common and well-established at present time at the assembly operations of electronic products. The process of further improvement of these finishes is continuing, and actively develops unlike their less common counterparts - different finishes based on palladium and galvanically deposited NiSn and SnAg finishes. Outside of the scope of this article remain important issues, such as a detailed examination of a number of lead-free coatings and methods for solderability testing, measuring the surface resistance of the coating and the shear strength of solder joints in compliance with international standards. These issues will be covered in future articles on these subjects.References
- Standart: J-STD-003 “Solderability Tests for Printed Boards”;
- Standart IPC 2221 “Generic Standard on Printed Board Design”;
- Standart IPC-7095A “Design and Assembly Process Implementation for BGAs” ;
- “Alternative Technologies for Surface Finishing” Pollution Prevention Information Clearinghouse and U.S. Environmental Protection Agency, website: www.epa.gov/opptintr/library/ppicdist.htm
- Beauvillier, Luc; Holle Galyon; Matt Stevenson; Darren Hitchcock –“PWB Surface Finishes” –SMTA Meeting. March 16th, 2005;
- Kermit Aguayo. “Selection of PWB finish” - Process Sciences Inc., 2008
- Beauvillier, Luc –“The Quest for the Ultimate Surface Finish”. Published in “Printed Circuit Design” magazine; Jun 2002, Vol. 19, Issue 6, p 27;
- F. D. Bruce Houghton. “Solving the ENIG Black Pad Problem: An ITRI Report on Round 2” PWBRC;
- Duane Benson. “Black Pad — And Then Some SMT”, smt.pennnet.com;
- “The Quest for the Ultimate Surface Finish”, printed circuit design – June, 2002. www.merix.com;
- “Surface Finish Options” Merix Corporation. www.merix.com;
- Solberg, Vern. “Specifying Base Materials for SMT Circuit Boards”, Part 3 SMT – September, 2005
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2014 Simona Partinova
This work is licensed under a Creative Commons Attribution 4.0 International License.
The consolidation and conditions for the transfer of copyright (identification of authorship) is carried out in the License Agreement. In particular, the authors reserve the right to the authorship of their manuscript and transfer the first publication of this work to the journal under the terms of the Creative Commons CC BY license. At the same time, they have the right to conclude on their own additional agreements concerning the non-exclusive distribution of the work in the form in which it was published by this journal, but provided that the link to the first publication of the article in this journal is preserved.
A license agreement is a document in which the author warrants that he/she owns all copyright for the work (manuscript, article, etc.).
The authors, signing the License Agreement with TECHNOLOGY CENTER PC, have all rights to the further use of their work, provided that they link to our edition in which the work was published.
According to the terms of the License Agreement, the Publisher TECHNOLOGY CENTER PC does not take away your copyrights and receives permission from the authors to use and dissemination of the publication through the world's scientific resources (own electronic resources, scientometric databases, repositories, libraries, etc.).
In the absence of a signed License Agreement or in the absence of this agreement of identifiers allowing to identify the identity of the author, the editors have no right to work with the manuscript.
It is important to remember that there is another type of agreement between authors and publishers – when copyright is transferred from the authors to the publisher. In this case, the authors lose ownership of their work and may not use it in any way.