Aloe vera as cutting fluid optimization using response surface method
DOI:
https://doi.org/10.15587/1729-4061.2018.123223Ключові слова:
Optimization, Aloe Vera, Flank Wear, Surface RoughnessАнотація
The fluid of vegetable Aloe Vera has characteristics as a cutting fluid, Aloe Vera cutting fluid (AVCF) has an excess of environmental reduction effects from oil-based cutting fluid (OBCF). Surface Response Methodology (RSM) based Central Composite Design (CCD) was applied as an experimental design, to predict the optimum parameters in the turning process. Because RSM is the final description of a good experimental design to improve the linear response surface model, and in determining the optimum operating conditions. Twenty sets of experimental tests were prepared by three reversed parameter factors, feed rate (f), depth of cut (a), and AVCF three type. Roughness (Ra) and flank wear (VB) were defined as response variables and then analyzed by multiple quadratic regression to determine the most appropriate mathematical model. The combined effects of the parameters were investigated using contour plots and surface plots. HSS as a cutting tool and Steel St.42 workpiece were used to achieve 20 tests. The adequacy of the developed model was examined using Analysis of Variance. Based on the results, the optimum process is shown by the following parameters: f=0.140 mm/rev; a=2.0556 mm, and AVCF=71.8970 cSt provide optimal cutting conditions with lower Ra and f=0.20 mm/rev, a=2.50 mm, and AVCF=8.8050 cSt giveoptimal cutting conditions with lower VB. Therefore, the improvement of AVCF as a substitute for OBCF continued experiments.
Посилання
- Lawal, S. A., Choudhury, I. A., Nukman, Y. (2012). Application of vegetable oil-based metalworking fluids in machining ferrous metals – A review. International Journal of Machine Tools and Manufacture, 52 (1), 1–12. doi: 10.1016/j.ijmachtools.2011.09.003
- Ramana, M. V., Rao, K. M., Rao, D. H. (2013). Effect of Process Parameters on Surface Roughness in Turning of Titanium Alloy under Different Conditions of Lubrication – Recent. Recent Advances in Robotics, Aeronautical and Mechanical Engineering, 83–91.
- Sharafadeen, K. K., Jamiu, K. O. (2013). Performance Evaluation of Vegetable Oil-Based Cutting Fluids in Mild Steel Machining. Chemistry and Materials Research, 3 (9), 35–45.
- Rahim, E. A., Sasahara, H. (2011). A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys. Tribology International, 44 (3), 309–317. doi: 10.1016/j.triboint.2010.10.032
- Priarone, P. C., Robiglio, M., Settineri, L., Tebaldo, V. (2015). Effectiveness of Minimizing Cutting Fluid Use when Turning Difficult-to-cut Alloys. Procedia CIRP, 29, 341–346. doi: 10.1016/j.procir.2015.02.006
- Prakash, D., Ramana, M. V. (2013). Performance Evaluation of Different Tool in Turning of Ti-6Al-4V Alloy Under Different Coolant Condition. International Journal of Science and Research.
- Debnath, S., Reddy, M. M., Yi, Q. S. (2014). Environmental friendly cutting fluids and cooling techniques in machining: a review. Journal of Cleaner Production, 83, 33–47. doi: 10.1016/j.jclepro.2014.07.071
- Debnath, S., Reddy, M. M., Yi, Q. S. (2016). Influence of cutting fluid conditions and cutting parameters on surface roughness and tool wear in turning process using Taguchi method. Measurement, 78, 111–119. doi: 10.1016/j.measurement.2015.09.011
- Machai, C., Iqbal, A., Biermann, D., Upmeier, T., Schumann, S. (2013). On the effects of cutting speed and cooling methodologies in grooving operation of various tempers of β-titanium alloy. Journal of Materials Processing Technology, 213 (7), 1027–1037. doi: 10.1016/j.jmatprotec.2013.01.021
- Liu, Z., An, Q., Xu, J., Chen, M., Han, S. (2013). Wear performance of (nc-AlTiN)/(a-Si3N4) coating and (nc-AlCrN)/(a-Si3N4) coating in high-speed machining of titanium alloys under dry and minimum quantity lubrication (MQL) conditions. Wear, 305 (1-2), 249–259. doi: 10.1016/j.wear.2013.02.001
- Shyha, I., Gariani, S., Bhatti, M. (2015). Investigation of Cutting Tools and Working Conditions Effects when Cutting Ti-6al-4V using Vegetable Oil-Based Cutting Fluids. Procedia Engineering, 132, 577–584. doi: 10.1016/j.proeng.2015.12.535
- Hartono, P., Pratikto, Suprapto, A., Irawan, Y. S. (2017). Characterisation of Aloe Vera as a Cutting Fluid. Modern Machinery Science Journal.
- Komposisi Kimia Gel Lidah Buaya (Aloe vera L.) (1992). Ministry of Health of Republic of Indonesia.
##submission.downloads##
Опубліковано
Як цитувати
Номер
Розділ
Ліцензія
Авторське право (c) 2018 Priyagung Hartono, Pratikto Pratikto, Agus Suprapto, Yudy Surya Irawan
Ця робота ліцензується відповідно до Creative Commons Attribution 4.0 International License.
Закріплення та умови передачі авторських прав (ідентифікація авторства) здійснюється у Ліцензійному договорі. Зокрема, автори залишають за собою право на авторство свого рукопису та передають журналу право першої публікації цієї роботи на умовах ліцензії Creative Commons CC BY. При цьому вони мають право укладати самостійно додаткові угоди, що стосуються неексклюзивного поширення роботи у тому вигляді, в якому вона була опублікована цим журналом, але за умови збереження посилання на першу публікацію статті в цьому журналі.
Ліцензійний договір – це документ, в якому автор гарантує, що володіє усіма авторськими правами на твір (рукопис, статтю, тощо).
Автори, підписуючи Ліцензійний договір з ПП «ТЕХНОЛОГІЧНИЙ ЦЕНТР», мають усі права на подальше використання свого твору за умови посилання на наше видання, в якому твір опублікований. Відповідно до умов Ліцензійного договору, Видавець ПП «ТЕХНОЛОГІЧНИЙ ЦЕНТР» не забирає ваші авторські права та отримує від авторів дозвіл на використання та розповсюдження публікації через світові наукові ресурси (власні електронні ресурси, наукометричні бази даних, репозитарії, бібліотеки тощо).
За відсутності підписаного Ліцензійного договору або за відсутністю вказаних в цьому договорі ідентифікаторів, що дають змогу ідентифікувати особу автора, редакція не має права працювати з рукописом.
Важливо пам’ятати, що існує і інший тип угоди між авторами та видавцями – коли авторські права передаються від авторів до видавця. В такому разі автори втрачають права власності на свій твір та не можуть його використовувати в будь-який спосіб.