Results of experiments on receiving clinker from iron an steel production wasters

Authors

  • V. P. Kravchenko ПАТ «ММК ім. Ілліча», м. Маріуполь, Ukraine

DOI:

https://doi.org/10.31498/2225-6733.22.2011.21416

Keywords:

blast-furnace slag, limestone, chemical analysis, strength

Abstract

By means of burning at different temperature modes two-component raw mix consisting of iron and steel production wastes: waste blast-furnace slags + limestone «final tailings» taken in 2:3 ratio, correspondingly, clinker samples were obtained, chemical analysis of which showed correspondence of their chemical composition to chemical composition of standard clinker. Laboratory testing proved high strength values for all prototype clinker samples

Author Biography

V. P. Kravchenko, ПАТ «ММК ім. Ілліча», м. Маріуполь

Інженер

References

Рациональный вариант получения клинкера (цемента) из доменных шлаков / В.П. Кравченко, П.И. Пилов, Л.Ж. Горобец, Н.С. Прядко. – Днепропетровск: Научно-техн. сборник НТУ «Збагачення корисних копалин», 2010. – № 4. – С. 23-27.

Патент 35038, Украина, СО4В 7/00. Способ изготовления клинкера / В.П. Кравченко, В.С. Бойко, В.А. Струтинский, В.И. Трубников, А.В. Савощенко. Опублик. 2008, Бюл. № 16.

Колокольников В.С. Производство цемента / В.С. Колокольников. – М.: Высшая школа, 1970. – 287 с.

Липилин А.Б. Селективная дезинтеграторная активация портландцемента (СДАП) / А.Б. Липилин, Н.В. Коренюгина, М.В. Векслер // Строительные материалы. – 2007. – С. 2-4.

Кравченко В.П. Активация доменных шлаков / В.П. Кравченко // Вісник ПДТУ. – Мариуполь.: ПГТУ. – 2010. – № 21. – С. 17-20.

Downloads

How to Cite

Kravchenko, V. P. (2014). Results of experiments on receiving clinker from iron an steel production wasters. Reporter of the Priazovskyi State Technical University. Section: Technical Sciences, (22), 50–54. https://doi.org/10.31498/2225-6733.22.2011.21416

Issue

No. 22 (2011): Reporter of the Priazovskyi State Technical University. Section: Technical sciences

Section

Ironmaking

License

The journal «Reporter of the Priazovskyi State Technical University. Section: Technical sciences» is published under the CC BY license (Attribution License).

This license allows for the distribution, editing, modification, and use of the work as a basis for derivative works, even for commercial purposes, provided that proper attribution is given. It is the most flexible of all available licenses and is recommended for maximum dissemination and use of non-restricted materials.

Authors who publish in this journal agree to the following terms:

1. Authors retain the copyright of their work and grant the journal the right of first publication under the terms of the Creative Commons Attribution License (CC BY). This license allows others to freely distribute the published work, provided that proper attribution is given to the original authors and the first publication of the work in this journal is acknowledged.

2. Authors are allowed to enter into separate, additional agreements for non-exclusive distribution of the work in the same form as published in this journal (e.g., depositing it in an institutional repository or including it in a monograph), provided that a reference to the first publication in this journal is maintained.